NAILGIRLS Fresa ELettrica Acrylic Nails Glazing Machine Operation Manual

NAILGIRLS Fresa ELettrica Acrylic Nails Glazing Machine

Thanks for purchasing the glazing machine produced by our company. To ensure smooth operation and safe performance, please read the manual carefully before use

Installation and wire connection

1. connect the 5-pin plug of the portable grinding head/hand piece to the OUTPUT socket at the main panel.
2. Connect the pedal switch to the FOOT S/W socket
3. Select the proper drill bit according to actual requirements, and fasten it to the handpiece
4. Turn the speed control knob to the left(MIN)
5. Connect with the main source power.

Operation

1. press the function switch to HAND for manual control.the indicator will be on and the grinding head starts to moving slowly.
2. Turn the SPEED CONTROL to the right to accelerate the speed.
3. When the function switch is pressed to FOOT, step on the pedal and the machine starts to work. (foot switch is optional)
4. The turning directions can be swapped: FWD means clockwise direction and REV means counterclockwise direction.
5. Adjust the speed of the grinding head within a reasonable range.
6. Please adjust the handpiece to the lowest speed before changing forward/backward direction.

Specifications

1. Main(power supply&control)part
   • Rated voltage range: 100~120V/60Hz, 220~240V/50Hz
   • Rated power input: 25W
   • Output rated voltage: DCO- 18V
2. Handpiece(motor)part
   • Working voltage: DCO- 18V
   • Rated current: 0-2A
   • Rated speed: 0- 35000RPM

Instructions

1. Turn the SPEED CONTROL counterclockwise to decelerate the grinding head to the minimum before turning off and switch the main power source to 0.
2. After operation, put the grinding head on the top of main panel
3. While the grinding head is in operation, never pull out the 5-pin plug of the portable grinding head
4. For long idle time, please disconnect the source power
5. Any unauthorized disassembling of the product is prohibited. In case of any breakdown, please contact the agent or authorized repair center We promi se swift, high-quality and satisfactory service
6. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly question in order to avoid a hazard

How to release tip and lock tip

1. Step1 : Turn left to loose the head
2. Step2 : Pull out the stainless steel rods
3. Step3 : Insert the tip
4. Step4 : Turn right to secure the tip
5. Step5 : Enjoy the product
   Always remmber to stop the maching before change the tip.

Maintenance

Cleaning:

• After each use, clean the machine’s handpiece, drill bits, and any attachments thoroughly to remove nail debris, dust, and residue. Use a soft brush or a damp cloth for cleaning.
• Ensure that all components are completely dry before storing them.

Sanitization:

• Regularly disinfect the handpiece, drill bits, and attachments using an appropriate disinfectant solution designed for nail tools. This helps maintain hygiene and prevents the buildup of bacteria and germs.
• Follow the manufacturer’s recommended sanitization procedures.

Lubrication (if applicable):

• Some models may require lubrication for the handpiece. If your device needs lubrication, follow the manufacturer’s guidelines for proper lubrication to ensure smooth operation.

Storage:

• Store the NAILGIRLS Fresa Elettrica Acrylic Nails Glazing Machine and its components in a clean, dry, and dust-free environment.
• Keep it out of direct sunlight and away from extreme temperatures to prevent damage.

Regular Checks:

• Periodically inspect the device for loose screws, connections, or components. Ensure that the handpiece is securely attached to the main unit.

Troubleshooting

Device Doesn’t Start:

• Check if the power cord is properly plugged in, or if you’re using a battery-powered model, ensure that the battery is sufficiently charged.
• Verify that the power switch or button is in the “on” position.

Inconsistent Speed or Vibration:

• Examine the condition of the nail drill bits for damage or wear. Replace any worn-out bits.
• Ensure that the handpiece is securely attached to the main unit, and there are no loose connections.

Overheating or Stopping During Use:

• If the device becomes too hot or stops working, it may have an overload protection feature. Allow it to cool down, and then restart it. Avoid applying excessive pressure while using it.

Unusual Noise:

• If you hear unusual or loud noises during operation, it may indicate internal component issues. Stop using the device and contact the manufacturer’s customer support for guidance on repairs.

Loss of Power During Use:

• If the device loses power unexpectedly, check the power cord for any loose connections or damage. If the cord is damaged, replace it.

Battery-Related Problems (if applicable):

• If using a battery-powered model, check the battery’s charge level. Ensure it’s charged fully before use.
• If the battery does not hold a charge or loses capacity over time, it may need replacement. Contact the manufacturer for battery replacement options.

Other Issues:

• If you encounter any other problems or issues not covered here, refer to the user manual provided with your device for specific troubleshooting guidance. Alternatively, reach out to the manufacturer’s customer support for assistance.

FAQs

How does the NAILGIRLS Fresa ELettrica improve the quality of acrylic nails?

The NAILGIRLS Fresa ELettrica helps in smoothing and refining the surface of acrylic nails, resulting in a polished and professional look.

What are the key features of the NAILGIRLS Fresa ELettrica Acrylic Nails Glazing Machine?

The NAILGIRLS Fresa ELettrica features variable speed control, ergonomic design, and interchangeable drill bits for precise nail glazing.

What is the NAILGIRLS Fresa ELettrica Acrylic Nails Glazing Machine?

The NAILGIRLS Fresa ELettrica is an acrylic nails glazing machine designed for professional nail technicians to enhance the finish of acrylic nails.

What types of nail treatments can the NAILGIRLS Fresa ELettrica be used for?

The NAILGIRLS Fresa ELettrica is suitable for various nail treatments, including shaping, filing, and buffing acrylic nails.

Is the NAILGIRLS Fresa ELettrica suitable for both beginners and experienced nail technicians?

Yes, the NAILGIRLS Fresa ELettrica is versatile and can be used by both beginners and experienced nail technicians.

Is the NAILGIRLS Fresa ELettrica portable and easy to use?

Yes, the NAILGIRLS Fresa ELettrica is compact, lightweight, and designed for easy handling, making it portable and user-friendly.

Are the drill bits of the NAILGIRLS Fresa ELettrica easy to change?

Yes, the NAILGIRLS Fresa ELettrica comes with easy-to-change interchangeable drill bits for convenience.

Does the NAILGIRLS Fresa ELettrica come with different speed settings?

Yes, the NAILGIRLS Fresa ELettrica offers adjustable speed settings, allowing users to choose the right speed for different nail procedures.

How do I clean and maintain the NAILGIRLS Fresa ELettrica?

Cleaning and maintenance instructions for the NAILGIRLS Fresa ELettrica can be found in the user manual provided with the machine.

Can the NAILGIRLS Fresa ELettrica be used for natural nails as well?

Yes, the NAILGIRLS Fresa ELettrica can be used for both acrylic and natural nails, making it versatile for different nail services.

What safety features does the NAILGIRLS Fresa ELettrica have?

The NAILGIRLS Fresa ELettrica includes safety features such as overheat protection and a comfortable handpiece to ensure user safety.

Video-NAILGIRLS Fresa ELettrica Acrylic Nails Glazing Machine

Download This Manual PDF:NAILGIRLS Fresa ELettrica Acrylic Nails Glazing Machine Operation Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>