SKS Kontakttechnik MLB 100 1 V Measuring Leads User Guide

June 16, 2024
SKS Kontakttechnik

SKS Kontakttechnik MLB 100 1 V Measuring Leads

SKS-Kontakttechnik-MLB-100-1-V-Measuring-Leads-product-
image

Product Information

Measuring Leads MLB 100/1 V
The MLB 100/1 V measuring leads are designed for accurate voltage and current measurements. They feature a 4 mm sliding sleeve system for easy connection to compatible devices. The leads are made with high-quality materials to ensure durability and reliability. The contact pin is made of brass, while the contact spring is made of copper-beryllium. The housing is made of PA material, which has a UL 94 V-2 inflammability class rating.

Technical Data

  • Rated Voltage Measurement Cat. Acc. to IEC 61010 : 30 VAC / 60 VDC
  • Rated Current : 16 A (consider derating curve)
  • Cable Length : 100 cm
  • Conductor Size Cable Material : Contact the manufacturer for applications at deviating temperature ranges

Product Usage Instructions

Step 1: Preparation
Before using the MLB 100/1 V measuring leads, make sure to inspect them for any visible damage. Check the cable, connectors, and insulation for any signs of wear or tear. If any damage is found, do not use the leads and contact the manufacturer for assistance.

Step 2: Connection
To connect the measuring leads, follow these steps

  1. Identify the black and red leads. The black lead represents the negative (-) terminal, while the red lead represents the positive (+) terminal.
  2. Ensure that the device or circuit you are connecting to is powered off.
  3. Insert the black lead’s contact pin into the corresponding socket or terminal on the device, making sure it is securely inserted.
  4. Repeat the previous step for the red lead, inserting it into the appropriate socket or terminal.

Step 3: Measurement
Once the leads are connected, you can proceed with taking measurements. Ensure that the device or circuit you are measuring is properly configured and powered on. Use caution and follow all safety guidelines provided by the manufacturer of the device or circuit.

Step 4: Post-Measurement
After completing your measurements, carefully disconnect the measuring leads. Always handle the leads by the insulated parts to avoid any risk of electric shock. Store the leads in a safe and dry place for future use.

Specifications

  • Rated Voltage Measurement Cat. Acc. to IEC 61010 : 30 VAC / 60 VDC
  • Rated Current : 16 A
  • Material Socket : Contact Pin – Brass, Contact Spring – Copper-Beryllium
  • Housing Material : PA (UL 94 V-2)
  • Cable Length : 100 cm

Frequently Asked Questions (FAQ)

  • Q: What is the maximum rated voltage for measurement with these leads?
    A: The maximum rated voltage for measurement with the MLB 100/1 V measuring leads is 30 VAC or 60 VDC.

  • Q: Can I use these leads for high-current measurements?
    A: The MLB 100/1 V measuring leads have a rated current of 16 A. However, it is important to consider the derating curve and contact the manufacturer for applications at deviating temperature ranges.

  • Q: How long is the cable?
    A: The cable length of the MLB 100/1 V measuring leads is 100 cm.

Measuring leads

MLB 100/1 V

4 mm sliding sleeve system

Product MLB 100/1 V
description
  • Contact protected test lead on both sides sprung plug Ø 4 mm, insulated by latching and sprung insulated, which is only released by pressure on the lateral locking spring, and rigid socket Ø 4 mm to the far pluginess.
  • Highly flexible, double insulated stranded conductor with integrated color indicator for detecting damage to the insulation.

operating instruction| BA401
article-no. /

*colour

| 9736461xx


00

black

| ****01

red

| ****

**** 02

blue

| ****

03

yellow

| ****

04

green

|

88

yellow green

| ****

07

white

drawing|
| **
technical data**|
rated voltage| 30 VAC / 60 VDC
measurement cat. acc. to IEC 61010| O (2)
rated current (consider derating curve)| 16 A
material socket| contact pin: brass

contact spring: copper – beryllium

housing material| PA
temperature range acc. To IEC61010(1)| -15 °C to +70 °C
inflammability class acc. to UL 94

(only valid for basic material of housing)

| V-2
cable length| 100 cm

Downloaded from Arrow.com.

conductor size 1 mm²
cable material PVC
  1. contact the manufacturer for applications at deviating temperature ranges
  2. without rated measurement category, for other circuits that are not directly connected to mains stand: 21.06.2022

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals