Q ACOUSTICS 3000FSi Speaker Stands Instruction Manual
- June 10, 2024
- Q ACOUSTICS
Table of Contents
Q ACOUSTICS 3000FSi Speaker Stands
Product Information
The 3000i Speaker Stand Pair is a set of stands designed for the Q Acoustics 3010i and 3020i speakers. The stands are made up of 12 parts including 4 long vertical tubes, 2 short vertical tubes, 8 screws, 8 locking nuts, and 2 bases. The stands are designed to provide a stable and secure platform for your speakers, ensuring optimal sound quality and performance.
Product Usage Instructions
- Begin by unpacking all of the parts and checking that you have everything required for assembly.
- Take one of the base plates and insert two of the long vertical tubes into the holes on the plate. Secure them in place using the screws and locking nuts provided.
- Attach the other base plate to the top of the long vertical tubes using the remaining screws and locking nuts.
- Insert the short vertical tubes into the holes on the top base plate.
- Carefully place your Q Acoustics 3010i or 3020i speakers onto the top base plate, making sure they are secure and stable.
- Repeat steps 2-5 for the second stand.
- Place the speaker stands in your desired location and enjoy optimal sound quality from your Q Acoustics speakers.
Please note that these instructions are a general guideline and may vary depending on the specific model of speaker stand you have purchased. Always refer to the user manual provided with your product for detailed instructions and safety information.
Parts
Assembly Instructions
Warning
- Do not use close to a strong heat source – radiators, heaters or electrical equipment.
- Do not expose the stands to excessive cold, heat, humidity, or sunlight.
- To clean use a damp cloth with washing up liquid if necessary.
- Do not use abrasive cleaners or cleaners containing solvents.
- Do not overtighten the wings.
- Spikes should be fitted where doors are carpeted, for all exposed doors – wood, tiled, etc use the domed feet.
- To avoid damage when spikes are tied take care to place the stand where it cannot mark furnishings or pierce mains cables etc.
- The spikes will not damage carpets.
- QACOUSTICS.CO.UK
- Our policy is one of continuous product improvement.
- We reserve the right to change the designs and specifications without notice.
- This document contains information that is subject to change without notice
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>