AUDAC WP210-B Universal Wall Panel User Guide
- June 16, 2024
- AUDAC
Table of Contents
WP210
Universal wall panel – Microphone
& line input – 80 x 80 mm
Highlights:
- Elegant design to blend in with any environment
- Compatible with EU (80×80 mm) installation materials
- Signal transmission over twisted pair (CAT5E) or better cabling
- Signal transmission insensitive for interference and noise
Product information:
The WP210 is a remote wall mixer that can be used in combination with various
AUDAC hardware (ARES5A, MTX series, AMP523 and more). It converts the signal
coming from a stereo line-level audio source (such as a tuner, mobile devices,
… ) or balanced microphone to the level corresponding to the differential
signal input making it possible to transfer highquality audio over long
distances between the wall panel and the loudspeaker, by just using
inexpensive twisted-pair CAT5e or better cabling. On the front side of the
wall panel, there is a 3.5 mm jack stereo line input connection available
together with a balanced XLR microphone input, both provided with their own
knob which allows the signals to be mixed together.
The WP210 is available in 2 colours (White – RAL9003 & Black – RAL9005)
and is compatible with most standard EU (80×80 mm) style in-wall boxes for
solid and hollow walls. With the Elegant ABS front panel with glass, it will
blend into any environment
Applications:
- Retail
- Education
- Bars & Restaurants
- Corporate
System specifications:
| Outputs | Level | -12 dB | |
|---|---|---|---|
| 0 dB | |||
| nputs | Wall Panel | Type | 3.5 mm jack stereo line input connection |
| XLR microphone input connection | |||
| Mic & Line inputs on rear for permanent connections | |||
| Connection | 3.5 mm jack input (Stereo line input) | ||
| Female XLR input connector (Microphone inpL: | |||
| input |
6-pin terminal block (3.81 mmp input
connection on rear (duplicated pine mic
| | | 8-pin terminal block (3.81 mm pitch) output connection
Control| | | Individual input level control for Mic & Line
| | | Phantom power (DIP switch on rear)
| | | Low-cut (Mic) enable / disable (DIP switch on rear)
| | | Mono / Stereo (DIP switch on rear)
Product Features:
| Dimensions | 80 x 80 mm (W x H) (Remote wall panel) | ||
|---|---|---|---|
| Colours | Black (RAL9005) (WP210/B) | ||
| White (RAL9003)(WP2101W) | |||
| Front finish | Elegant ABS front panel with glass | ||
| Accessories | Optional | Surface mount Installation boxes | WB200 – Surface mount |
wall box for WP & DWP series
| | Flush mount Installation boxes| Flush mount box for 45 x 45 mm wall panel
– Solid wall – WB45S/FS
| | | Flush mount box for 45 x 45 mm wall panel – Hollow wall – WB45S/FG
Standards & regulations:
| ICE | LVD | Compliant to EN 62368 |
|---|---|---|
| EMC | Compliant to EN 55032, EN55024, EN 61000-3-2/3 | |
| CB | Compliant to IEC 62368 I | |
| FCC | Part 15C | |
| TUVus | Compliant to IEC |
62368+UL62368
RoHS| | Compliant
Reach compliant.| | Compliant
Variants:
- WP210/B – Black version
- WP210/W – White version
Architects’ and Engineers’ Specifications:
The remote wall mixer shall be used to convert signals coming from a stereo
line-level audio source (such as a tuner, mobile devices, …) or balanced
microphone to the level corresponding to the differential signal input. The
input level of the Mic or Line signals shall be individual controllable. By
providing them with their own knob, the signals can be mixed together. An XLR
connector shall be provided as a microphone input, and a 3.5 mm stereo jack
connector as a line input. A 6-pin terminal block shall be provided at the
back of the device for a permanent input connection.
The wiring between the wall panel and various AUDAC hardware shall be done by
using standard CAT5e or better cabling which transfers audio signal to the
analogue AUDAC hardware while providing the power supply for the wall panel.
The connection shall be made through an 8-pin Terminal Block Connector
provided on the backside of the wall panel.
The back of the device must contain 6 DIP switches. These DIP switches must
enable or disable following functions: Mono-mode, lowcut, 0dB to 12dB
switchable (left or right) and Phantom power.
The wall panel housing shall be constructed out of ABS with a front panel of
glass. De device must have a build-in depth of 52,7mm and must be compatible
with most standard EU (80×80 mm) style in-wall boxes for solid and hollow
walls. It’s weight shall not exceed 0.072 kg.
Technical drawings:
We reserve the right to change specifications without notice, this is part of
our policy to continually improve our products.
AUDAC – WP210 – 25/12/2023 16:40 UTC