AUDAC NELO706 Surface Mount Speaker Instruction Manual
- June 3, 2024
- AUDAC
Table of Contents
AUDAC NELO706 Surface Mount Speaker
Surface mount speaker
The NELO706 surface-mount loudspeakers allow installation to any wall or
ceiling where functional and cost-efficient reproduction for music & speech is
required. It features a 6.5” broadband loudspeaker with a continuous power
handling of 10 Watt (RMS) and is fitted with a line transformer for use in
70V/100V public address systems with power tappings for 6W and 3W. The housing
is minimalistic and elegant designed with a very narrow border and a finely
perforated steel grill on the front. Connections are made through SnapConnect™
terminals, offering a faster, more reliable and safer choice for fixed
installations. The NELO706 are available in various models with (NELO706V) and
without (NELO706) individual volume controller on its side while being
available in two different colors (Black /B & White /W) to blend in with any
residential, commercial or industrial environment.
Please note: given specifications are preliminary and subject to change.
Applications
- Retail
- Hotels
- Public facilities
- Corporate spaces
Voltage
System specifications
Product Features
Variants
- NELO706/B – Black version without volume controller
- NELO706/W – White version without volume controller
- NELO706V/B – Black version with volume controller
- NELO706V/W – White version with volume controller
Architects’ and Engineers’ Specifications
The surface-mount loudspeaker shall be a full-range type equipped with a 6.5” driver and fitted with a line transformer allowing it to be used on 100 Volt distributed line systems. It shall have an RMS power handling of 10 Watt with a maximum power handling of 20 Watt and the frequency response (±3 dB) shall range from 100 Hz to 15 kHz. The sensitivity shall be 96 dB when measuring with an input signal of 1 Watts at a distance of 1 meter, while the maximum continuous sound pressure level shall be 106 dB. The nominal dispersion shall be a 140° conical coverage pattern at -6dB (average 100 Hz – 10 kHz). The loudspeaker shall be fitted with a multi-topping line transformer with tappings for 6 Watt and 3 Watt. Fast and safe connection of the system shall be possible using SnapConnect™. The speakers’ frame shall be constructed in high-quality ABS material and the front shall be finished through a borderless and finely perforated steel grill. It shall come available in both white (RAL9003) and black (RAL9005) colors and custom painting shall make it blend in with any environment. The speaker shall have a diameter of 206,5mm, a depth of 95 mm and the weight shall not exceed 1,08 kg. The speaker shall be fixed to the wall with two screws spaced 130 mm apart.
Acoustical data graphs
Horizontal Polars:
Vertical Polars
Sensitivity
Beamwidth (-3dB)
Directivity index
- We reserve the right to change specifications without notice, this is part of our policy to continually improve our products.
