AUDAC NWP220 Network Input Panel User Manual Product Information

: May 15, 2024
: AUDAC

Table of Contents

NWP220 Network Input Panel
Product Information
Specifications
Product Usage Instructions
Chapter 1 – Connections and Network Settings
Chapter 2 – Front and Rear Panel Overview
Chapter 2 – Installation
Chapter 3 – Quick Start Guide
- Frequently Asked Questions (FAQ)
Q: Are there any user-serviceable parts in the product?
Q: What are the essential requirements and directives this

NWP220 Network Input Panel

“`html

Product Information

Specifications

Models: NWP220, NWP320, NWP222
Communication: IP-based
Compatibility: PoE network-based
Design: Elegant with fingerprint-resistant glass
Color Options: Black and White
Installation: Compatible with standard EU-style in-wall
boxes

Product Usage Instructions

Chapter 1 – Connections and Network Settings

Connect the wall panel using the appropriate connectors.
Configure network settings as required for your setup.

Chapter 2 – Front and Rear Panel Overview

Understand the functions of the front and rear panels for
effective use. The front panel features high-quality glass and the
rear panel provides necessary connections.

Chapter 2 – Installation

Install the wall panel securely in either solid or hollow walls
using standard EU-style in-wall boxes. Choose the appropriate color
option to blend with your wall design.

Chapter 3 – Quick Start Guide

Refer to the quick start guide for a step-by-step setup process
to begin using the wall panel efficiently.

Frequently Asked Questions (FAQ)

Q: Are there any user-serviceable parts in the product?

A: No, this product contains no user-serviceable parts. All
servicing should be done by qualified service personnel.

Q: What are the essential requirements and directives this

product conforms to?

A: This product conforms to the essential requirements of
directives 2014/30/EU (EMC), 2014/35/EU (LVD), and 2014/53/EU
(RED).

“`

Hardware Manual
NWP220,NWP222 & NWP320
audac.eu

ADDITIONAL INFORMATION
This manual is put together with much care, and is as complete as could be on the publication date. However, updates on the specifications, functionality or software may have occurred since publication. To obtain the latest version of both manual and software, please visit the Audac website @ audac.eu.

02

NWP220, NWP320 & NWP222 – Quick Start Manual

Table of contents

Introduction

05

Networked audio in- & output wall panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05

Precautions

06

Chapter 1

08

Connections and connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08

Network settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09

Chapter 2

10

Overview front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Front panel description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Overview rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Rear panel description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Chapter 3

12

Quick start guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Technical specifications

14

Notes

15

NWP220, NWP320 & NWP222 – Quick Start Manual

03

04

NWP220, NWP320 & NWP222 – Quick Start Manual

Introduction
Networked audio in- & output wall panels
NWP series are DanteTM/AES67 networked audio in & output wall panels featuring various connection options, ranging from XLR to USB Type-C and all with Bluetooth connection. The audio inputs can be switched between line-level and microphone-level audio signals and phantom power (+48 V DC) can be applied to the XLR input connectors for powering condenser microphones. Various further integrated DSP functions such as EQ, automatic gain control, and other device settings can be configured through the AUDAC TouchTM.
The IP-based communication makes it future-proof while also being backward compatible with many existing products. Thanks to the limited PoE power consumption, the NWP series is compatible with any PoE network-based installation.
Besides the elegant design, the front panel is finished with high-quality fingerprint-resistant glass. The wall panels are compatible with standard EU- style in-wall boxes, making the wall panel the ideal solution for solid and hollow walls. Black and white color options are available to blend into any architectural design.

NWP220, NWP320 & NWP222 – Quick Start Manual

05

Precautions
READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY
ALWAYS KEEP THESE INSTRUCTIONS. NEVER THROW THEM AWAY ALWAYS HANDLE THIS UNIT WITH CARE HEED ALL WARNINGS FOLLOW ALL INSTRUCTIONS NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR SPLASHING LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON TOP OF THIS DEVICE NO NAKED FLAME SOURCES, SUCH AS LIGHTED CANDLES, SHOULD BE PLACED ON THE APPARATUS DO NOT PLACE THIS UNIT IN AN ENCLOSED ENVIRONMENT SUCH AS A BOOKSHELF OR CLOSET. ENSURE THERE IS ADEQUATE VENTILATION TO COOL THE UNIT. DO NOT BLOCK THE VENTILATION OPENINGS. DO NOT STICK ANY OBJECTS THROUGH THE VENTILATION OPENINGS. DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS OR OTHER APPARATUS THAT PRODUCE HEAT DO NOT PLACE THIS UNIT IN ENVIRONMENTS WHICH CONTAIN HIGH LEVELS OF DUST, HEAT, MOISTURE OR VIBRATION THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS PLACE THE UNIT ON A STABLE BASE OR MOUNT IT IN A STABLE RACK ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE MANUFACTURER UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME ONLY CONNECT THIS UNIT TO A MAINS SOCKET OUTLET WITH PROTECTIVE EARTHING CONNECTION USE THE APPARATUS ONLY IN MODERATE CLIMATES

CAUTION – SERVICING

This product contains no user serviceable parts. Refer all servicing to qualified service personnel. Do not perform any servicing (unless you are qualified to)

EC DECLARATION OF CONFORMITY
This product conforms to all the essential requirements and further relevant specifications described in following directives: 2014/30/EU (EMC), 2014/35/EU (LVD) & 2014/53/EU (RED).
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
The WEEE marking indicates that this product should not be disposed with regular household waste at the end of its life cycle. This regulation is created to prevent any possible harm to the environment or human health.

This product is developed and manufactured with high quality materials and components which can be recycled and/or reused. Please dispose this product at your local collection point or recycling centre for electrical and electronic waste. This will make sure that it will be recycled in an environmentally friendly manner, and will help to protect the environment in which we all live.

06

NWP220, NWP320 & NWP222 – Quick Start Manual

07

Chapter 1

Connections
CONNECTION STANDARDS

The in- and output connections for AUDAC audio equipment are performed according to international wiring standards for professional audio equipment

3.5 mm jack: For unbalanced line input connections Tip: Ring: Sleeve:

Left Right Ground

XLR For balanced microphone input connections
PIN 1: PIN 2: PIN 3:

Ground Signal + Signal –

08

NWP220, NWP320 & NWP222 – Quick Start Manual

RJ45 (Network, PoE) connections

Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8

White-Orange Orange White-Green Blue White-Blue Green White-Brown Brown

Network

Ethernet (POE): Used for connecting the NWP series in your Ethernet network with PoE (power over Ethernet). The NWP series complies with the IEEE 802.3 af/at standard, which allows IP-based terminals to receive power, in parallel to data, over the existing CAT-5 Ethernet infrastructure without the need to make any modifications in it.
PoE integrates data and power on the same wires, it keeps the structured cabling safe and does not interfere with concurrent network operation. PoE delivers 48v of DC power over unshielded twisted-pair wiring for terminals consuming less than 13 watts of power.
The maximum output power is depending on the power delivered by the network infrastructure. In case the network infrastructure is not capable of delivering sufficient power, use a PoE injector to the NWP series.
While CAT5E network cable infrastructure is sufficient for handling the required bandwidth, it is recommended to upgrade the network cabling to CAT6A or better cabling to achieve the best possible thermal and power efficiency throughout the system when drawing higher powers over PoE.
Network settings
STANDARD NETWORK SETTINGS
DHCP: ON IP Address: Depending on DHCP Subnet Mask: 255.255.255.0 (Depending on DHCP) Gateway: 192.168.0.253 (Depending on DHCP) DNS 1: 8.8.4.4 (Depending on DHCP) DNS 2: 8.8.8.8 (Depending on DHCP)

NWP220, NWP320 & NWP222 – Quick Start Manual

09

Chapter 2
Overview front panel
The front panel of the NWP series is finished with high-quality fingerprint- resistant glass and features various connection options, ranging from XLR to USB Type-C, and all with Bluetooth connection. Buttons on the front panel either change the input level between the microphone and line level or make the wall panel visible for Bluetooth connection, or both based on the model.
Unbalanced Stereo Line Input
Balanced Microphone/Line Input

Buttons for mic/line level selection and status indicator LEDs

Balanced Line Output

Balanced Microphone/Line Input

Buttons for mic/line level selection and status indicator LEDs
Front panel description
Balanced Microphone/Line Input A balanced microphone or line-level input can be connected to this XLR input connector. For powering condenser microphones, phantom power can be enabled. The input level can be changed either from the front panel or from the AUDAC TouchTM.
Unbalanced Stereo Line Input An unbalanced stereo audio source can be connected to this 3.5mm jack stereo line input.
Buttons for Input Signal Level Selection and Bluetooth Connection The input level can be changed either from the front panel or from the AUDAC TouchTM. For security reasons, button functions can be disabled from the AUDAC TouchTM.
Pressing a button for 3 seconds will change the LED indicator color between green (line level) and red (microphone level). Buttons are configurable. The user can choose between which levels you can toggle (default is 0dB or +40dB). Pressing and holding both buttons enables Bluetooth pairing when both LEDs blink in blue color. The brightness of LED indicators is adjustable from the AUDAC TouchTM.

010

NWP220, NWP320 & NWP222 – Quick Start Manual

Overview rear panel
The rear of the NWP series contains an ethernet connection port which is used to connect the wall panel to the RJ45 connector. As the NWP series are DanteTM/AES67 networked audio in & output wall panels with PoE, all data flow and powering are done through this single port.

Ethernet connection
Rear panel description
Ethernet connection The Ethernet connection is the essential connection for the NWP series. Both audio transmission (Dante/ AES67), as well as control signals and power (PoE), are distributed over the Ethernet network. This input shall be connected to your network infrastructure. The LEDs accompanied by this input are indicating the network activity.
Installation
This chapter guides you through the setup process for a basic setup where an NWP series networked wall panel should be connected to a system with a wired network. The wall panels are compatible with standard EU-style in-wall boxes, making the wall panel the ideal solution for solid and hollow walls. Provide a twisted pair cable (CAT5E or better) from the network switch to the wall panel. The maximum safest distance between the PoE switch and the wall panel should be 100 meters.
n68

WB45S/FS or WB45S/FG (Optional)

NWP220, NWP320 & NWP222 – Quick Start Manual

011

Removing the front cover
The front panel of the NWP series can be removed by using a flat head screwdriver in 5 steps.

Step 1:

Step 2:

Step 3:

Step 4:

Step 5:

012

NWP220, NWP320 & NWP222 – Quick Start Manual

Chapter 3
Quick start guide
This chapter guides you through the setup process for a NWP series wall panel where the wall panel is a Dante source connected to the network. The control of the system is done through the NWP or Audac TouchTM.
Connecting the NWP series

Connecting the NWP series to your network Connect your NWP series wall panel to a PoE-powered Ethernet network with a Cat5E (or better) networking cable. In case the available Ethernet network is not PoE compatible, an additional PoE injector shall be applied in between. The operation of the NWP series wall panel can be monitored through the indicator LEDs on the front panel of the unit, which indicate the input level or Bluetooth status.
Connecting the XLR The XLR connector shall be connected to the XLR connector on the front panel, Depending on the NWP model, two XLR inputs or two XLR inputs and two XLR outputs can be connected on the front panel.
Connecting the Bluetooth Pressing and holding both buttons enables Bluetooth pairing when both LEDs blink in blue color. The Bluetooth antenna is located behind the front panel, so the front panel shall remain uncovered for a reliable Bluetooth signal reception.
Factory Reset
Press button 1 for 30 seconds. Once the LEDs start blinking in white, remove the network cable from the device within 1 minute. Replug the network cable, the device will be in factory defaults after repowering.

NWP220, NWP320 & NWP222 – Quick Start Manual

013

Configuring the NWP series

Dante controller Once all connections are made, and the NWP series wall panel is operational, the routing for the Dante audio transfer can be made.
For the configuration of the routing, the Audinate Dante Controller software shall be used. The use of this tool is extensively described in the Dante controller user guide which can be downloaded from both Audac (audac.eu) and Audinate (audinate.com) websites.
In this document, we quickly describe the most basic functions to get you started.
Once the Dante controller software is installed and running, it will automatically discover all the Dantecompatible devices in your network. All devices will be shown on a matrix grid with on the horizontal axis all the devices with their receiving channels shown and on the vertical axis all the devices with their transmitting channels. The shown channels can be minimized and maximized by clicking the +’ and-‘ icons.
Linking between the transmitting and receiving channels can be done by simply clicking the cross points on the horizontal and vertical axis. Once clicked, it only takes a few seconds before the link is made, and the cross point will be indicated with a green checkbox when successful.
To give custom names to the devices or the channels, double-click the device name and the device view window will pop up. The device name can be assigned in the Device config’ tab, while the transmitting and receiving channel labels can be assigned under theReceive’ and `Transmit’ tabs.
Once any changes are made to linking, naming, or any other, it is automatically stored inside the device itself without requiring any save command. All settings and linkings will be automatically recalled after power off or re-connection of the devices.
Besides the standard and essential functions described in this document, the Dante Controller software also includes many additional configuration possibilities that might be required depending on your application requirements. Consult the complete Dante controller user guide for more information.
NWP series settings Once the Dante routing settings are made through the Dante Controller, other settings of the NWP series wall panel itself can be configured using the Audac TouchTM platform, which can be freely downloaded and operated from various platforms. This is very intuitive to be operated and automatically discovers all available compatible products in your network. Available settings include input gain range, output mixer, as well as advanced configurations such as WaveTuneTM and much more.

014

NWP220, NWP320 & NWP222 – Quick Start Manual

Technical specifications

Inputs

Type
Connector Impedance

Sensitivity* THD+N

Signal / Noise

Balanced Mic/Line (NWP220/222/320) Front: 2 x female XLR 10 kOhm Unbalanced 20 kOhm Balanced 0 dBV (Line) / -35 dBV (Mic) < 0.02% – 0.013% (Line) < 0.1% – 0.028% (Mic) > 93 dBA (Line) / > 86 dBA(Mic)

Type Connector Impedance Sensitivity THD+N Signal / Noise

Unbalanced Stereo Line (NWP320) Front: 3.5 mm jack 10 kOhm Unbalanced 0 dBV <0.02% – 0.013% > 93 dBA

Type

Bluetooth receiver (Version 4.2)

Type

Dante / AES67 (4 Channels) RJ45 with indicator LEDs

Configurable Settings

Gain, AGC, Noise Gate, WaveTuneTM, Maximum Volume

Output

Type

Balanced Line (NWP222)

Connector