PXN P50S Wireless Gaming Controller User Manual
- June 16, 2024
- PXN
Table of Contents
PXN P50S Wireless Gaming Controller
Thank you for choosing and supporting PXN, please read this manual carefully before starting to enjoy your gaming experience.
Product Overview
System Requirement
- Supported Platform: SWITCH, PC, Android, iOS
- SWITCH Device: SWITCH, SWITCH LITE, SWITCH OLED
- PC: Windows 7/ 8/ 10/ 11
- iOS Device: iOS 13.0 and above
- Android Device: Android 8.0 and above
Power ON / OFF
Power ON: Long press [Power Switch] for 3 seconds to power ON and enter pairing. Power OFF: Short press [Power Switch] to reset and power OFF.
Mobile APP Function
After connecting the controller to the device, controller functions can be configured through the mobile app.
APP Mode (No need to connect the devices, only connect to the APP)
- Step 1 Long press buttons for 3 seconds, and the controller’s LED4 will flash to enter the APP Mode.
- Step 2 Open the mobile app and wait for the controller to connect automatically.
The controller’s LED4 will stay on to indicate a successful connection.
Mode Switching
When the controller is in APP mode, long press buttons for 5 seconds to switch to Switch mode, or long press buttons for 5 seconds to switch to Xinput mode.
- Download for iOS: Search [PXN Play] on the App Store.
- Download for Android: Search [PXN Play] on Google Play.
- Controller Macro Function Setting and Sharing
- Controller Joystick Sensitivity Adjustment
- Controller Vibration Intensity Adjustment
- Controller Turbo Function Adjustment
- Controller Joystick and Motion Sensor Calibration
- Controller Sleep Time Adjustment
- More functions are under continuous development.
How to use on SWITCH
Wireless Connection
- Step 1 Click [Controller] → [Change Grip/ Order] on the SWITCH homepage.
- Step 2 Long press [Power Switch] for 3 seconds to enter pairing. After displaying the remaining battery, the controller’s four LED lights will flash in a loop, indicating connection status.
- Step 3 Once connected successfully, the controller’s LED1 will stay on to indicate a successful connection.
SWITCH Reconnection and Wake-up
In Wireless connection mode, press button on the controller can reconnect and wake up the SWITCH.
Wired Connection
Click [Setting] on the SWITCH homepage → [Controllers and Sensors] → click [Pro Controller Wired Connection]. Please make sure this option state is ON.
- Connect with SWITCH Console
- Please make sure the controller is OFF/ under Sleep state before the wired connection.
- Step 1 Connect the controller to the SWITCH using a Type-C data cable and an OTG adapter.
- Step 2 LED1 indicator on the controller will flash to indicate a successful connection.
Note: The OTG adapter needs to be purchased separately）
- Connect with SWITCH Dock
- Please make sure the controller is OFF/ under Sleep state before the wired connection.
- Step 1 Connect the controller to the SWITCH Dock using a Type-C data cable.
- Step 2 LED1 indicator on the controller will flash to indicate a successful connection.
NFC Function
The controller features built-in NFC sensing function. When the controller is connected to the SWITCH console via a wireless connection, and if the game supports the Amiibo function, you can use an Amiibo figure at the designated spot [ ] on the controller to activate corresponding in-game items. (It is recommended to use authentic Amiibo figures)
Controller Motion / 3D Joystick Calibration
When motion function is abnormal or the joystick experiences drifting, you can utilize the controller calibration feature.
- Step 1 In sleep mode, simultaneously press the [L3+R] buttons to enter calibration mode. The controller’s four LED lights will alternate flashing in two groups.
- Step 2 Rotate the left and right sticks simultaneously for 2-3 times and ensure the sticks reach the outermost positions.
- Step 3 Place the controller on a level tabletop, then press the [+ ] button on the
controller. After releasing the button for 3 seconds, the sensor and 3D joystick calibration will be automatically completed. The controller will enter sleep mode at this time.
How to use on PC
Dongle Connection
- Step 1 Insert the Dongle into a USB port on the PC.
- Step 2 Under the controller off state, long press the [Power Switch] for 3 seconds, then press the button on the Dongle. The Dongle’s white light will rapidly flash, indicating pairing mode.
- Step 3 Once connected successfully, the controller’s LED2 light will remain on and the controller will default to Xinput mode. （Note: The Dongle is not included; separate purchase is required for use）
Mode Switching
After connecting the controller to the Dongle, simultaneously long press the [
+] and [- ] buttons for 3 seconds to switch modes.
Wired Connection
- Step 1 Connect the controller to a USB port on the PC using a USB data cable.
- Step 2 The computer will prompt that new hardware is detected and installation is complete. The controller’s LED2 indicator light will flash to indicate a successful connection. Once connected, the controller will be in Xinput mode. (When fully charged, the LED2 indicator light will remain on.)
Wireless Connection
- Step 1 Under the controller off state, long press the buttons for 3 seconds. Release the buttons when the LED2 light rapidly flashes, indicating pairing mode.
- Step 2 In the PC Bluetooth settings, search for “Xbox Wireless Controller” and initiate the pairing connection.
- Step 3 Once connected successfully, the controller’s LED2 light will remain on.
Connect with Android/ iOS
Wireless Connection
- Step 1 Under the controller off state, long press the buttons for 3 seconds. Release the buttons when the LED2 light rapidly flashes, indicating pairing mode.
- Step 2 In the Bluetooth settings of Android or iOS device, search for “Xbox Wireless Controller” and initiate the pairing connection.
- Step 3 Once connected successfully, the controller’s LED2 light will remain on.
Auxiliary Function
Turbo Function
The buttons that can be set for TURBO function are: A, B, X, Y, L, R, ZL, ZR
.
Controller Vibration Adjustment Function
After powering on and connecting, hold down [ ] and operate the Left Joystick
Up/Down to adjust the motor vibration intensity. The default vibration setting
is medium. The vibration adjustment feature includes a memory function.
Macro Programming Function
Action Buttons: Left Joystick (↑/ ↓/ ←/ →), Right Joystick (↑/ ↓/ ←/ →), D-pad(↑/ ↓/ ←/ →), A/ B/ X/ Y/ L/ R/ ZL/ ZR/ L3/ R3/- /+ . Programming Buttons: M1, M2.
Macro Programming Configuration:
- Hold down button, then press either the M1 or M2 programming button. The button’s white indicator light will stay on, indicating programming mode.
- Press the action button that needs to be programmed, such as Left Joystick (↑/ ↓/ ←/ →), D-pad(↑/ ↓/ ←/ →), A/ B/ X/ Y/ L/ R/ ZL/ ZR/ L3/ R3.
- After programming, press the programming button, the white indicator goes off,
and the orange indicator remains on. (For each set of macro programming, you can program up to 64 action buttons. When the number of action buttons exceeds 64, the programming will end with the orange indicator staying on.)
Macro Programming Clear:
- Hold down button, then press either the M1 or M2 programming button. The button’s white indicator light will stay on, indicating programming mode.
- Press one of the programming buttons, M1 or M2, to clear the programming of the corresponding macro button. After clearing, the white light will turn off, and the orange light will remain on.
Macro Button Quick Deactivation
Disable Back Button: Hold down M1 or M2 on the controller, then press- button. Enable Back Button: Hold down M1 or M2 on the controller, then press+ button . When the back button function is disabled, if you configure the back button settings through the app and save and apply, the corresponding back button function will be enabled.
Charging Function
Power Supply for Charging: Standard USB 5V voltage. The controller can be
charged using a mobile phone charger, computer, or other USB interfaces. The
controller takes about 2-3 hours to be fully charged.
Sleep Function
Reset Function
When the controller experiences function confusion, freezes, or other anomalies, short press the [Power Switch] to enter the power-off state, then long press the [Power Switch] for 8 seconds. The controller will vibrate once to indicate successful factory reset. After the factory reset, proceed to re- pair and connect. Restoration includes: clearing Turbo function, resetting the controller’s Turbo rate to default (5 times/second), reverting the controller’s vibration setting to medium, resetting the controller’s sleep time to default (5 minutes), and restoring the controller’s macro configuration to factory settings.
Attention
- Avoid strong vibrations; do not disassemble, modify, or attempt repairs.
- Prevent water or other liquids from entering the controller to avoid damage.
- Avoid storing in humid, high-temperature, or oily environments.
- The controller contains a battery; do not dispose of it in a fire, as it may explode.
- Children should use this product under adult supervision.
- For any quality issues or suggestions, please contact the retailer or customer support.
Product Specifications
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>