TooQ LPHA7090 Pixel Wall Mount for Adjustable Interactive Screens Instruction Manual

TooQ LPHA7090 Pixel Wall Mount for Adjustable Interactive Screens Instruction Manual

Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warmings, please contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.

• Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
• Safety gear and proper tools must be used. This product should only be installed by professionals
• Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
• Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws
• This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury

IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement.

MAINTENANCE: Check that the bracket is secure and safe to use at regular intervals (at least every three months).

Tools Required

• A (x1)

• B (x1)

• C(x1)

• D (x2)

• E (x2)

• F(x1)

• M6x12 (x4) G

• M6x16 (x2) H

• M6x25 (x2) I

• J (x4)

• K (x1)

• M6x14 M-A (x4)

• M8x16 M-B (x4)

• M6x30 M-C (x4)

• M8x35 M-D (x4)

• D8 M-E (x4)

• Ø15x08x5 M-F (x4)

• Ø15x08x15 M-G (x4)

• W-A (x6)

• W-B (x6)

• W-C (x6)

Installation Instruction

Note: The horizontal brackets are to be used ONLY with interactive smart whiteboard having 600×400/700×400/800×400/800X500/800×600 VESA patterns.

3. The mount comes with a default balance setting. Adjust to the number found on the scale that matches the weight of the whiteboard. To properly balance the unit, use a drill with a nut-driver to adjust the four balance bolts (two located on each side, left and right). Alternate between each side until it has achieved a perfect balance.

4. 5. 6. Make a fine adjustment to ensure a perfect balance.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>