TOOQ TQE-2599RGB 2.5 Inch HDD-SSD External Case User Manual
- June 8, 2024
- TooQ
Table of Contents
TOOQ TQE-2599RGB 2.5 Inch HDD-SSD External Case User Manual
Introduction
TooQ 2,5” storage enclosure is Plug & Play and allows you to connect your SATA disk (HDD or SSD) through a USB 3.0 / 3.1 Gen 1 port to any device.
For your safety and correct use of this product, please read this instruction manual carefully before beginning installation.
Features
- USB Interface 3.0 / 3.1 Gen 1 / 2.0 – Up to 5 Gbps.
- Supports 2.5” HDD or SSD disks up to 9.5 mm thick and up to 4TB capacity.
- SATA I, II and III.
- Supported file types: FAT32 / NTFS / APFS / eXT4 / HFS+.
- Plug & Play, no need to install drivers.
- LED indicates power and data access.
- Plastic enclosure.
- 5V DC power through the USB port, no external power required.
Package content
- 1 x Storage enclosure.
- 1 x Connection cable.
- 1 x User manual.
System Requirements
- Have a USB port on the device you want to connect.
- Compatible with Windows, Mac and Linux.
The PCB board of the enclosure is very sensitive to electrostatic discharges. Be sure to release static electricity before mounting the storage enclosure
Hardware installation
-
Press the top side of the external enclosure with your fingers in the direction indicated by the arrow.
-
Insert the disc into the housing connecting it to the PCB board. Caution:
Do not touch the chipset on the PCB board or the guarantee will be void.
-
Fit the lower part over the cover and slide it in the direction indicated by the arrow.
-
Connect the cable with the USB-A end to the device and the Micro USB to the storage enclosure.
The transfer speed will be adapted to the version of the USB port on the device.
Disk partition and file format+
If the disk is new, it will not be recognized by the system until you create
partitions and format it.
This operation can be performed in systems based on:
Windows: Equipment (Right button) → Manage → Storage → Disk
administrator.
Mac: Finder → Go → Utilities → Disk Utility.
Linux: System → System Administration → Disk Utility
In case of hard disk failure:
- Check that the disk partition and file format partition have been performed.
- Check that the hard disk is in optimum condition. If this is not the case, contact the manufacturer or distributor.
Warranty Information
TooQ offers a guarantee of 36 months from the time of purchase, so it is
essential to have the ticket or invoice where the date appears.
The distributor or dealer from whom you purchased this product will handle
your claim and provide technical service while the warranty is in effect.
The storage enclosure should show the serial number without having been
altered or erased, if it is not intelligible, the warranty will not be
applied.
Out of Warranty
The warranty does not cover the effects and damage caused to the storage enclosure due to:
- Do not follow the user manual.
- Modifications or alterations of any kind.
- High and low temperatures, humidity and contact with liquids.
- Wear and scratches caused to everyday use.
The warranty does not cover damage or defects to the hard drive caused by improper use of the hard drive or the storage enclosure.
FAQ
Can be found frequently asked questions on our website
www.tooq.com under the product link.
Products may suffer variations due to stock change, product improvement or
printing error. If you have any doubt, please contact us.
- AII specifications are subject to change without notice.
- Products may not be available in all markets.
- Product color and bundled software versions are subject to change without notice.
- Brand and product names mentioned are trademarks of their respective companies.
CUSTOMER SUPPORT
©2022 by TooQ Technology, S.L.
Released in 2022/09.
AII Rights Reserved.
tooq.com