TooQ FS20300M-B Floor Support with Wheels SCREENS/TV Installation Guide
- June 4, 2024
- TooQ
Table of Contents
TooQ FS20300M-B Floor Support with Wheels SCREENS/TV
Read the entire instruction manual before you start installation and assembly.
If you have any questions regarding any of the instructions or warnings,
please contact your \ii local distributors for assistance.
CAUTION:
Use with products heavier than the rated weights indicated may result in
instability causing possible injury.
- Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- IMPORTANT:
- Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement.
- MAINTENANCE:
Check that the bracket is secure and safe to use at regular intervals (at least every three months).
Whats inbox?
CAUTION:
Please hold the inner
column when loosening the screws to adjust the height. Adjust to the desired
height and then tighten the screws but leave a small gap between screws (X)
and the outer columns. Also, make sure the left and right inner columns at the
same height.
Height markings represent the distance from the floor to the center of the TV screen. Lock the brakes on the casters to avoid any sudden movements during installation.
CAUTION: After assembling the plate (F) to the columns as shown, tighten
the screws (W).
Note: Tighten the safety screw.
Note:
Rotate the bottom screws counterclockwise to lock.
Rotate the bottom screws clockwise to unlock.
Caution:
Please unload the TV before adjusting the height.
Height markings represent the distance from of the TV screen.
Remove the screws.
Note: Attach the connecting plate to the universal plate with the removed
screws. Tighten all screws using a proper Phillips
screwdriver.
Note: Loosen the screws on both support blocks to adjust the DVD shelf to
the desired height then lighten all screws to secure.
Maintenance
- Check if the bracket is secure and safe to use at regular intervals(at least every three months).
- Please contact your distributor if you have any questions.