Sygonix SY-5770786 Table Lamp LED 22 W Instruction Manual

Sygonix SY-5770786 Table Lamp LED 22 W

Specifications:

• Power Consumption: Max. 24 W
• Power Consumption in Watts: 22 W
• Protection Class: III
• Dimensions (W x H x D): 340 x 330 x 170 mm
• Weight: 336 g
• LED Power Consumption: Max. 5.5 W
• Luminous Efficacy: 64 lm/W
• Lifetime: 30000 hours
• Number of LEDs: 36
• Color Rendering Index: Ra 90
• Color Temperature: 3000 K, 4000 K, 5000 K
• Brightness: Low: 13 lm, Medium: 150 lm, High: 260 lm
• Wireless Charging Output Voltage/Current: 5 V 1 A / 9 V 1.1 A (max. 10 W)
• Charging Protocol: Qi
• Frequency Range: 110 – 205 kHz
• Transmitting Power: 6.41 dBuV/m at 300 m
• Charging Efficiency: 75%
• Power Adapter Input Voltage/Current: 220 – 240 V/AC, 50/60 Hz, 0.6 A
• Power Adapter Output Voltage/Curren t: 12 V/DC 2 A

Product Usage Instructions

1. Safety
   Ensure the following safety measures are taken:

   • Do not expose the product to mechanical stress.
   • Only use the product in dry, enclosed indoor areas. Do not let it become damp or wet.
   • Consult an expert if you have any doubts about the operation, safety, or connection of the product.
   • If it is no longer safe to operate the product, discontinue use and seek professional assistance.

2. Power Adapter
   Important considerations for the power adapter:

   • Do not modify or repair mains supply components, including mains plugs, cables, and power supplies.
   • Do not use damaged components to prevent the risk of electric shock.

3. Lamp Components
   The LED desk lamp consists of the following components:

4. Lamp Head

5. Flexible Gooseneck

6. Charging Platform

7. Timer Button: Controls the timer function (ON/OFF)

8. Power  Button: Controls the lamp’s power (ON/OFF) and brightness adjustment

9. Color Temperature Button: Controls the color temperature

10. DC 12 V Power Input

11. LED Status Indicator

12. Connection Port

13. LED Status

14. Touch Operation

15. Cleaning
    To clean the LED desk lamp:

16. Disconnect the power adapter from the lamp.

17. Use a soft, dry cloth to wipe the lamp’s surface and remove any dust or dirt.

18. Reconnect the power adapter once the lamp is clean and dry.

19. Disposal
    Dispose of the product in accordance with local regulations for electronic waste disposal. Do not dispose of it with regulars household waste.

FAQ:

1. Q: Where can I download the latest operating instructions?
   A: You can download the latest operating instructions from the website www.conrad.com/downloads or by scanning the QR code provided in the manual

2. Q: What is the wireless charging output of the lamp?
   A: The lamp’s wireless charging output is 5 V 1 A / 9 V 1.1 A (max. 10 W) and supports the Qi charging protocol.

3. Q: What are the available color temperature options?
   A : The lamp offers three color temperature options: 3000 K, 4000 K, and 5000 K.

4. Q: Can I adjust the brightness of the lamp?
   A: Yes, you can adjust the brightness of the lamp. It has three levels of brightness: low (13 lm), medium (150 lm), and high (260 lm).

Operating Instructions
LED Desk Lamp with Wireless Charging
Item no: 2885393

 Intended use

• The product is an LED desk lamp with wireless charging platform with capacitive touch controls. Features include steeples dimming, adjustable colour temperature, previous settings memory, auto-off timer, and flicker free lighting.
• The product is intended for indoor use only. Do not use it outdoors.
• Contact with moisture must be avoided under all circumstances.
• If you use the product for purposes other than those described, the product may be dam-aged.
• Improper use can result in short circuits, fires, electric shocks or other hazards.
• The product complies with the statutory national and European requirements.
• For safety and approval purposes, you must not rebuild and/or modify the product.
• Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.
• All company names and product names are trademarks of their respective owners. All rights reserved.

Delivery contents

• Product
• Power adaptor
• Operating instructions

Operating instructions
Download the latest operating instructions from www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Description of symbols
The following symbols are on the product/appliance or are used in the text:

•   The symbol warns of hazards that can lead to personal injury.
• The symbol warns of dangerous voltage that can lead to personal injury by electric shock.
• This product must only be used in dry, enclosed indoor areas. It must not become damp or wet.
• The Qi symbol indicates this is a Qi certified device
• This product is constructed according to protection class III.

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

General

• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children
• If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
• Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.

Handling
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

Operating environment

• Do not place the product under any mechanical stress.
• Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
• Protect the product from high humidity and moisture.
• Protect the product from direct sunlight.

Operation

• Consult an expert when in doubt about the operation, safety or connection of the product.
• If it is no longer possible to operate the product safely, take it out of operation and pro-tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op Meration can no longer be guaranteed if the product:
  • is visibly damaged,
  • is no longer working properly,
  • has been stored for extended periods in poor ambient conditions or
  • has been subjected to any serious transport-related stresses.

Power adapter

Do not modify or repair mains supply components including mains plugs, mains cables, and power supplies. Do not use damaged components. Risk of death by electric shock!

• Connect the appliance to a wall socket that can be accessed easily.
• As power supply, only use the supplied mains adaptor.
• Only connect the power adaptor to a normal mains socket connected to the public sup-ply. Before plugging in the power adaptor, check whether the voltage stated on the power adaptor complies with the voltage of your electricity supplier.
• Never connect or disconnect power adaptors if your hands are wet.
• Never unplug the power adaptor from the mains socket by pulling on the cable; always use the grips on the plug.
• For safety reasons, disconnect the power adaptor from the mains socket during storms.
• Do not touch the power adapter if there are any signs of damage, as this may cause a fatal electric shock! Take the following steps:
  • Switch off the mains voltage to the socket containing the power adapter (switch off the corresponding circuit breaker or remove the safety fuse, and then switch off the cor responding RCD protective switch).
  • Unplug the power adapter from the mains socket.
  • Use a new power adapter of the same design. Do not use the damaged adapter again.
• Ensure that cables are not pinched, kinked or damaged by sharp edges.
• Always lay cables so that nobody can trip over or become entangled in them. This poses a risk of injury.

LED light

• Do not look directly into the LED light!
• Do not look into the beam directly or with optical instruments!

Connected devices

• Also observe the safety and operating instructions of any other devices which are connected to the product.

Product overview

Important:
Risk of damage. Do not overbend or twist the lamp neck.

1. Lamp head
2. Flexible gooseneck
3. Charging platform
4.  : Timer ON/OFF
5. : ON/OFF, brightness
6. : Colour temperature.
7. DC 12 V: power input
8. LED status indicator

Connection
Connect one end of the power adaptor to the DC 12V input on the product and the other end to a suitable power supply.

Charging

• Align the product over the charging platform.
• Charging will begin when the charging coils are aligned correctly.
• The status indicator light will indicate that charging is in progress.
  • See section: LED status

LED status

Touch button controls

Cleaning

Important:

• Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
• Do not immerse the product in water.

1.  Remove all accessories and disconnect the product from the power supply.
2. Clean the product with a dry, fiber free cloth.

Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product conforms to the 2014/53/EU directive.

• Click on the following link to read the full text of the EU declaration of conformity: www.conrad.com/downloads
• Enter the product item number in the search box. You can then download the EU declaration of conformity in the available languages.

Disposal

• This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.
• Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.
• Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):
  • in our Conrad offices
  • at the Conrad collection points
  • at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG
• End users are responsible for deleting personal data from the WEEE to be disposed of.
• It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Technical data

General
This product contains a light source of energy efficiency class G.

• Input ……………………………………….. 12 V/DC 2 A (max.)
• Power consumption…………………… max. 24 W
• Wattage …………………………………… 22 W
• Protection class ………………………… III
• Operating/storage conditions………. -20 to +55 °C, 10 – 90 % RH (non-condensing)
• Dimensions (W x H x D) …………….. 340 x 330 x 170 mm
• Weight …………………………………….. 336 g

LED

• Power ……………………………………… max. 5.5 W
• Efficiency …………………………………. 64 lm/W
• Lifespan…………………………………… 30,000 hrs
• Quantity …………………………………… 36 pcs
• Colour rendering index ………………. Ra ≥90
• Colour temperature……………………. 3000 K, 4000 K, 5000 K
• Brightness………………………………… Low: 13 lm, medium: 150 lm, high: 260 lm

Wireless charging

• Output……………………………………… 5 V 1 A / 9 V 1.1 A (max. 10 W)
• Charging protocol ……………………… Qi
• Frequency range ………………………. 110 – 205 kHz
• Transmission power ………………….. 6.41 dBuV/m @ 300 m
• Charging efficiency……………………. 75 %

Power adaptor

• Input ……………………………………….. 220 – 240 V/AC, 50/60 Hz, max. 0.6 A
• Output……………………………………… 12 V/DC 2 A

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.

• This publication reflects the technical status at the time of printing. Copyright by Conrad Electronic SE.
• 2885393_V3_1123_dh_mh_en 18014399516661771-2 I3/O3 en

References

• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>