V-TAC VT-4435 LED Schijnwerper Flood Light Instruction Manual
- June 16, 2024
- V TAC
Table of Contents
INSTRUCTION MANUAL
LED FLOOD LIGHT
WEEE Number: 80133970
TECHNICAL DATA
Model| SKU| Watts| Lumens| Beam
Angle| Long Life| DF| CRI| Input Power| Operation
Temperature| Dimension| N•W
(KGS)| MAX
MOUNTING
HEIGHT| PROJECTED
AREA(mm2)| WIRE
LENGTH
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
VT-4435| 9255
9891| 30W| 5550| SPHERE
360′| 25000H| >0.9| >70| AC220-240V
50Hz| -20 to +45°c| 164.5x153x34mm| 0.41| <5M| 25169.| 150mm
VT-4456| 9892
9893| 50W| 9250| SPHERE
3611| 25000H| >0.9| >70| AC220-240V
50Hz| _20 to +45°c| 183.5x169x34mm| 0.56| <5M| 31012.| 150mm
VT-44105| 9894
9895| 100W| 18500| SPHERE
360′| 250100H| >0.9| >70| AC220-240V
50Hz| -20 to +45°c| 253.5×242.5x4Omm| 1.| <5M| 61474.| 1M
VT-44205| 9896
9897| 200W| 37000| SPHERE
360′| 25000H| >0.9| >70| AC220-240V
50Hz| -20 to +45°c| 402.5×349.5x44mm| 3.| <5M| 140674.| 1M
*This product contains a light source of energy efficiency class,where shall be replaced by the energy class of the contained light source.
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the
best. Please read these instructions carefully before starting the installing
and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased
the product. They are trained and ready to serve you at the best. The warranty
is valid for 5 years from the date of purchase. The warranty does not apply to
damage caused by incorrect installation or abnormal wear and tear. The company
gives no warranty against damage to any surface due to incorrect removal and
installation of the product. The products are suitable for 10-12 Hours Daily
operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
WARNING
- Please make sure fo turn off the power before starting the installafion.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable, when the light source reaches ifs end of life the whole luminaire should be replaced.
- If the external flexible cable or cord of this luminaire is damaged. it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order 1o avoid a hazard.
- Replace any cracked profective shield.
- Terminal block not included.
- Proper grounding should be ensured hroughout the installafion.
- Minimum distance from lighted objects Tm. (
- Limitation of use indoors and outdoor.
NOTE: To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach.
**** This marking indicates that this product should not be disposed of with
other household wastes.
Caution, risk of electric shock.
Replaceable light source by a professional
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code fo access the manual in multiple languages. 
http://vtac.store/vt-4435
INSTALLATION DIAGRAM
INSTALLATION INSTRUCTION
- DO NOT USE IN AREAS WITH LIMITED VENTILATION OR OUTSIDE THE RATED AMBIENT TEMPERATURE RANGE. CON- NECT WITH WATERPROOF CABLE HOUSE ONLY.
ENSURE ELECTRICITY IS SWITCH OFF BEFORE INSTALLATION. - Please do not mount to a surface that is prone to vibrations.* Remove the screw and the bracket afterward. (Figure 1)Before drilling, mark the hole position for fixing the bracket onto the wall (Screw not supplied). (Figure 2)
- Screw the retaining bracket to the wall with a suitable quantity of screws. (Figure 4)
- Mount the bracket back to the fixture. Adjust the floodlight according to the desired position. Tighten the screw. (Figure 5) Connect your main cable (HO5RN-F3G1.0mm2
Recommended) with the input lead of our product through the waterproof junction box.
Note, the line (-) of the lead. (Need to use the junction box of IP65 or above, ensure to tighten the waterproof screw) Switch on the power to make sure if the product is working.
DISASSEMBLY DIAGRAM
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:
SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 98
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>