Mlambert A-092 Wireless Charger Modern Shelf Floor Lamp Installation Guide
- June 16, 2024
- Mlambert
Table of Contents
Mlambert A-092 Wireless Charger Modern Shelf Floor Lamp
How To Install Shelf Floor Lamp
Package Contains
-
A.Screw Cover * 4
-
B. Screw* 8
-
C. Bottom Board * 1
-
D. Long Pole * 10
-
E. Short Thread- Pipe* 10
-
F. Middle Board* 1
-
G. Long Thread- Pipe* 2
-
H. Charging Board * 1
-
I. Socket Board * 1
-
J . Annulus* 1
-
K. Butterfly Nut* 1
-
L. Pull Chain * 1
-
M. Short Pole* 2
-
N. Medium Pole* 4
-
O. Top Frame * 1
-
P. Wooden Screw Cover* 4
-
Q. Lamp Shade * 1
-
R. Mini Pole * 4
-
S. Hex wrench * 1
-
T. Wire Clip * 4
Installation Steps
-
Use the hex wrench to fix the bottom board (C 1) and the Long poles (D 4) firmly with Screws (B * 4). Please note that the concave side of the bottom board faces down.
-
Rotate the Short Thread-Pipe(E 4) and screw them in the top of Long Poles. Put the Middle Board (F 1) on the Long poles through Short Thread-Pipe.
-
Tighten the Long Pole (D * 4) and fix them on the Middle Board.
-
Rotate the Short Thread-Pipe(E 2) and Long Thread-Pipe(G 2) and screw them in the top of Long Poles. Put the Charging Board (H * 1) on the Long poles through Short Thread-Pipe and Long Thread-Pipe.
-
Tighten the Long Pole (D 2) and Short Pole (M 2) and fix them on the Charging Board.
-
Rotate the Short Thread-Pipe(E 4) and screw them in the top of Long Poles and Short Poles. Put the Socket Board (I 1) on the Long poles and Short Poles through Short Thread-Pipe.
-
Tighten the Medium Pole (N * 4) and fix them on the Socket Board.
-
Put the Top Frame (0 1) and use the hex wrench to fix the top frame firmly with Screws (B 4). Then put the Wooden Screw Cover (P * 4).
-
Place the Lamp shade (Q 1) in the frame and secure the lampshade with Mini Pole (R 4 ). Tighten the Annulus (J 1) and Butterfly Nut(K 1) to secure the bulb base. Install the bulb(Not included) and plug in, pulling the chain, the floor lamp can be used.