SAMSUNG SM-R900 Galaxy Watch5 Pro Bluetooth User Manual

Infrared temperature sensor

Electrical biosensors

Optical heart rate sensor
· If you fasten the Watch too tightly, the skin irritation may occur and if you fasten it too loosely, friction may occur.
· Do not look directly at the optical heart rate sensor’s lights. Make sure children do not look directly at the lights. Doing so may impair your vision.
· If the Watch becomes hot to the touch, remove it until it cools. Exposing your skin to a hot surface of the Watch for a long time may cause low- temperature burns.
· Remove all water from your Watch and the band before measuring your body composition and ECG.
· If any water, dust, or stains are on the infrared temperature sensor, the measurements may be inaccurate.
· Clean the infrared temperature sensor with a soft cloth or cotton bud.

21

Getting started
· Use the HR feature only for measuring your heart rate. The accuracy of the optical heart rate sensor may be diminished depending on measurement conditions and surroundings.
· Cold ambient temperatures may affect your measurement; during winter or cold weather, keep yourself warm when checking your heart rate.
· Smoking or consuming alcohol before taking measurements may cause your heart rate to be different from your normal heart rate.
· Do not move, talk, yawn, or breathe deeply while taking heart rate measurements. Doing so may cause your heart rate to be recorded inaccurately.
· If your heart rate is extremely high or low, measurements may be inaccurate. · If measuring children’s heart rates, the measurement may not accurate. · Users with thin wrists may receive inaccurate heart rate measurements when the
device is loose, causing the light to be reflected unevenly. In this case, wear the Watch on your inner arm. · If heart rate measurement is not working properly, adjust the position of the Watch’s optical heart rate sensor to the right, left, up, or down on your wrist, or wear the Watch on your inner arm so that the sensor is in contact with your skin. · If the optical heart rate sensor and the electrical biosensors are dirty, wipe the sensors and try again. If foreign materials prevent the light from reflecting evenly, the measurement may not accurate. · The optical heart rate sensor may be affected by tattoos, marks, and hair on the wrist you wear your Watch on. These may cause your Watch not to recognise that you are wearing it, and the Watch’s features may not work properly. Therefore, wear your Watch on a wrist that does not interfere with the Watch’s features. · The measurement features may not work properly due to certain factors, such as the light from the optical heart rate sensor being blocked, depending on your skin brightness, blood flow under your skin, and the cleanliness of the sensor area. · For accurate measurements, use the Ridge sport band. The Ridge sport band may be sold separately depending on the model.
22

Getting started
Turning the Watch on and off
Follow all posted warnings and directions from authorised personnel in areas where the use of wireless devices is restricted, such as aeroplanes and hospitals.
Home key
Back key
Turning the Watch on
Press and hold the Home key for a few seconds to turn on the Watch. When you turn on the Watch for the first time or reset it, on-screen instructions will appear to launch the Galaxy Wearable app on your smartphone. Refer to Connecting the Watch to a smartphone for more information.
Turning the Watch off 1 Press and hold the Home key and the Back key simultaneously. Alternatively, open the
quick panel by dragging downwards from the top edge of the screen and tap .
2 Tap Power off.
You can set the Watch to turn off when you press and hold the Home key. On the Apps screen, tap (Settings) Advanced features Customise keys, tap Press and hold under Home key, and then select Power off menu.
Forcing restart
If your Watch is frozen and unresponsive, press and hold the Home key and the Back key simultaneously for more than 7 seconds to restart it.
23

Getting started
Connecting the Watch to a smartphone
Installing the Galaxy Wearable app
To connect your Watch to a smartphone, install the Galaxy Wearable app on the smartphone. Depending on your smartphone, you can download the Galaxy Wearable app from the following places:
· Samsung Android smartphones: Galaxy Store, Play Store · Other Android smartphones: Play Store
· It is compatible with Android smartphones that support Google mobile services. · You cannot install the Galaxy Wearable app on the smartphones that do not support
Watch syncing. Ensure that your smartphone is compatible with a Watch. · The Watch cannot be connected to a tablet.
Connecting the Watch to a smartphone via Bluetooth
1 Turn on the Watch. 2 Select a language to use and tap . 3 Select a country or region, and tap Restart.
The Watch will turn off and then restart.
4 Swipe upwards from the bottom of the screen.
On-screen instructions for launching the Galaxy Wearable app will appear.
5 Launch the Galaxy Wearable app on your smartphone.
If necessary, update the Galaxy Wearable app to the latest version.
6 Tap Start. 7 Select your Watch on the screen.
If you cannot find your device, tap Mine’s not here.
8 Follow the on-screen instructions to complete the connection.
When completing the connection, tap START and follow the on-screen instructions to learn about the Watch’s basic controls.
24

Getting started
· The initial setup screen may differ depending on your region. · Connection methods may vary depending on your region, model, smartphone, and
software version. · The Watch is smaller than normal smartphones so the network quality may be lower,
especially in areas with weak signals or poor reception. When a Bluetooth connection is unavailable, your cellular network or Internet connection may be poor or become disconnected. · When you connect your Watch to a smartphone for the first time or after resetting it, the Watch’s battery may drain more quickly while syncing data, such as contacts. · Supported smartphones and features may vary depending on your region, service provider, or device manufacturer. · When you cannot establish a Bluetooth connection between your Watch and the smartphone, the indicator icon will appear on the top of the Watch screen.
Connecting the Watch to a new smartphone
When you connect the Watch to a new smartphone, the Watch will reset all personal information. When the prompt appears before connecting your Watch to a new smartphone, tap Back up data to securely back up the stored data.
1 On the Apps screen, tap (Settings) General Connect to new phone
Continue. After a reset, it will automatically enter Bluetooth pairing mode.
2 On your new smartphone, launch the Galaxy Wearable app to connect to your Watch.
If the smartphone you want to connect to is already connected to another device, launch the Galaxy Wearable app on your smartphone and tap Add new device to connect with a new device.
25

Getting started
Remote connection
Your Watch and smartphone are connected via Bluetooth. You can sync your smartphone to your Watch when both devices are remotely connected to each other, even though a Bluetooth connection is not available. The Remote connection uses your mobile network or Wi-Fi. If this feature is not turned on, launch the Galaxy Wearable app on your smartphone, tap Watch settings Advanced features Remote connection, and then tap the switch to activate it.
Controlling the screen
Bezel
Your Watch has a touch bezel on the edges of the touchscreen. Swipe the bezel clockwise or anticlockwise to easily control various Watch functions.
· Scrolling through screens: Swipe the bezel to view other screens. · Moving from item to item: Swipe the bezel to move from item to item. · Adjusting the input value: Swipe the bezel to adjust the volume or brightness. When
adjusting the brightness, swipe the bezel clockwise to make the screen brighter. · Using the phone or alarm feature: Swipe the bezel clockwise to receive an incoming
call or to dismiss an alarm. Swipe the bezel anticlockwise to reject an incoming call or to activate the snooze feature for an alarm.
If the bezel does not work, take it to a Samsung Service Centre or an authorised service centre without disassembling the Watch.
26

Getting started

Touchscreen
Tapping To open an app, to select a menu item, or to press an on-screen button, tap it with your finger.
Dragging Tap and hold an item and drag it to the target position.

Tapping and holding
Tap and hold the screen for two or more seconds to access the edit mode.
Double-tapping
Double-tap quickly on an image to zoom in or out.

Spreading and pinching
Spread two fingers apart or pinch on an image to zoom in or out.

Swiping
Swipe to the left or right to view other panels.

· Do not allow the touchscreen to come into contact with other electrical devices. Electrostatic discharges can cause the touchscreen to malfunction.
· To avoid damaging the touchscreen, do not tap it with anything sharp or apply excessive pressure to it with your fingertips.
· It is recommended not to use fixed graphics on part or all of the touchscreen for extended periods. Doing so may result in afterimages (screen burn-in) or ghosting.
· The Watch may not recognise touch inputs close to the edges of the screen, which are outside of the touch input area.
· The touchscreen may not be available when water lock mode is activated.

27

Getting started
Screen composition
The Watch screen is the starting point of the Home screen, which is composed of several pages. You can view tiles or open the notification panel by swiping the screen to the left or right or by using the bezel.
Watch screen

Notification panel

Tiles

Add tiles.

The available panels, tiles, and their arrangement may vary depending on the software version.

Using tiles
To add a tile, tap Add tiles and select a tile. When tapping and holding a tile, you can access the edit mode to change the tile’s arrangement or remove the tiles.
· Moving the tile: Tap and hold a tile to move and drag it to the desired location. · Removing the tile: Tap on the tile to delete.

28

Getting started
Turning the screen on and off
Turning the screen on
Use the following methods to turn the screen on. · Turn the screen on with the keys: Press the Home key or Back key. · Turn the screen on by raising your wrist: Raise your wrist where you wear the Watch. If the screen does not turn on after you raise up your wrist, tap (Settings) on the Apps screen, tap Display, and then tap the Raise wrist to wake switch under Screen wake-up to activate it. · Turn the screen on by tapping the screen: Tap the screen. If the screen does not turn on after you tap the screen, tap (Settings) on the Apps screen, tap Display, and then tap the Touch screen to wake switch under Screen wake-up to activate it.
Turning the screen off
To turn off the screen, cover it with your palm. Also, the screen will automatically turn off if the Watch is not used for a specified period.
Switching the screen
Switching between the Watch and Apps screen
On the Watch screen, swipe upwards to open the Apps screen. To return to the Watch screen, swipe downwards from the top of the Apps screen. Alternatively, press the Home key or Back key.
An app

Watch screen

Apps screen

29

Getting started

Apps screen The Apps screen displays icons for all apps installed on the Watch.
The available apps may vary depending on the software version.

Opening apps On the Apps screen, tap an app icon to launch the app. To launch an app from the list of recent apps, on the Apps screen, tap

(Recent apps).

Closing apps

1 On the Apps screen, tap (Recent apps). 2 Use the bezel or swipe left or right on the screen to move to the app to close. 3 Swipe upwards on the app to close it.

To close all running apps, tap Close all.

Returning to the previous screen
To return to the previous screen, swipe right on the screen or press the Back key.

Lock screen
Use the screen lock feature to protect your data, such as your personal information saved on your Watch. After activating this feature, the Watch will require you to unlock it whenever you use it. However, if you unlock it once while wearing the Watch, it will remain unlocked.
Setting the screen lock
On the Apps screen, tap (Settings) Security Lock type and select the lock method. · Pattern: Draw a pattern with four or more dots to unlock the screen. · PIN: Enter a PIN with numbers to unlock the screen.

30

Getting started
Watch
Watch screen
You can check the current time or view other information. When you are not on the Watch screen, press the Home key to return to the Watch screen.
Changing the watch face
1 Tap and hold the Watch screen and tap Add watch face. 2 Use the bezel or swipe left or right on the screen, and then select a watch face.
If you tap More watch faces, you can download more watch faces from the Play Store app.
3 Tap Customise to customise the watch face. Swipe left or right on the screen to move to
an item you want to customise, and then select the desired colour and other things by using the bezel or swiping upwards or downwards on the screen. To set the complications, tap each complication area you want.
You can also change the watch face and customise it from your smartphone. Launch the Galaxy Wearable app on your smartphone and tap Watch faces.
Customising a watch face with a picture
Apply a picture as your watch face after importing a picture from your smartphone. Refer to Importing images from your smartphone for more information about importing pictures from a smartphone.
1 Tap and hold the Watch screen and tap Add watch face. 2 Tap My Photo+.
31

Getting started
3 Tap Customise. 4 Tap the screen and tap Add photo. 5 Select a picture to apply as a watch face and tap OK OK.
To zoom in or out on the picture, double-tap the image quickly, or spread two fingers apart or pinch the picture. When the picture is zoomed in, swipe the screen to make a part of the picture appear on the screen.
· To select several pictures at the same time, tap and hold a picture, select pictures by using the bezel or swiping left or right on the screen, and then tap .
· To add extra pictures after selecting pictures, tap Add photo. · Up to twenty pictures can be added as the watch face. The pictures you add will
appear when you tap the screen.
6 Swipe the screen to change the background and other items and return to the previous
screen.
Activating the Always On Display feature
Set the Watch screen and some apps’ screens to always stay on while wearing your Watch. However, the battery will drain more quickly than normal while using this feature. Open the quick panel by dragging downwards from the top edge of the screen and tap
. Alternatively, on the Apps screen, tap (Settings) Display and tap the Always On Display switch to activate it.
Activating watch only mode
In watch only mode, only the time will display and all other functions cannot be used. On the Apps screen, tap (Settings) Battery Watch only and tap Turn on. To deactivate watch only mode, press and hold the Home key for more than three seconds. Alternatively, place the Watch on the wireless charger.
32

Getting started
Notifications
Notification panel
Check a notification such as a new message or a missed call on the notification panel. On the Watch screen, swipe the bezel anticlockwise. Alternatively, swipe right on the screen to open the notification panel. When there are new notifications, an orange notification indicator will be visible on the Watch screen. If the notification indicator does not appear, on the Apps screen, tap (Settings) Notifications and tap the Notification indicator switch to activate it.
Notification indicator
Viewing incoming notifications
When you receive a notification, information about the notification, such as its type or the time you received it, will appear on the screen. If more than two notifications are received, use the bezel or swipe left or right on the screen to view more notifications. Tap the notification to view details.
33

Getting started
Deleting notifications
Swipe upwards on the screen while viewing a notification.
Selecting apps for receiving notifications
Select an app from your smartphone or Watch to receive notifications on your Watch.
1 Launch the Galaxy Wearable app on your smartphone and tap Watch settings
Notifications.
2 Tap More All and tap the switch next to apps to receive notifications from the
apps list.
Quick panel
This panel allows you to view the Watch’s current status and configure settings. To open the quick panel, drag downwards from the top edge of the screen. To close the quick panel, swipe upwards on the screen. Use the bezel or swipe left or right on the screen to move to the next or previous quick panel.
Indicator icon Remaining battery power and its indicator icon Quick setting icons
34

Getting started

Checking the indicator icons
Indicator icons appear at the top of the quick panel and let you know the Watch’s current status. The icons listed in the table below are most common.

Icon

Meaning

Bluetooth connected

Signal strength

LTE network connected

Wi-Fi connected

Watch and smartphone are remotely connected

Battery power level

The indicator icons may appear differently depending on the region, service provider, or model.

Checking quick setting icons
Quick setting icons appear on the quick panel. Tap the icon to change the basic settings or launch the function conveniently. To view more detailed settings, tap and hold a quick setting icon.
Refer to Editing a quick panel for more information about adding or removing the quick setting icons on the quick panel.

Icon / /

Meaning Activate sleep mode Access the power options Launch the Settings app Activate do not disturb mode Activate the Always On Display feature Activate sound, vibrate, or silent mode Activate the flash feature Adjust the brightness

35

Getting started

Icon

Meaning

Activate power saving mode

Open the volume menu

Connect the Wi-Fi network

Activate water lock mode

Activate flight mode

Connect the Bluetooth headset

Launch the Find My Phone app

Activate the location information feature

Activate theatre mode

Connect the mobile network (SM-R905F, SM-R915F, SM-R925F)

Activate the NFC feature

Activate the touch sensitivity feature

Connect to Bluetooth (SM-R905F, SM-R915F, SM-R925F)

Editing a quick panel
Tap to access the edit mode to change the quick setting icon’s arrangement, or add or remove the quick setting icon.
· Moving the quick setting icon: Tap and hold a quick setting icon to move and drag it to the desired location.
· Adding the quick setting icon: Tap on the quick setting icon to add. · Removing the quick setting icon: Tap on the quick setting icon to delete.

36

Getting started
Entering text
Keyboard layout
A keyboard appears when you enter text.

Delete a preceding character.

Enter uppercase. For all caps, tap it twice.

Enter a space.

· The text input screen may be different depending on the app you launch.
· Text entry is not supported in some languages. To enter text, you must change the input language to one of the supported languages.

Changing the input language
Drag the icon upwards, tap Input languages Manage languages, and then select the languages to use. When you select two languages, you can switch between the input languages by swiping to the left or right on the space key. You can add up to two languages.
You can also set the input languages by tapping (Settings) on the Apps screen and tapping General Input Samsung Keyboard Input languages Manage languages.

Changing the keyboard type
Drag the icon upwards, tap Input languages, select a language, and then select the keyboard type you want.
On a 3 x 4 keyboard, a key has three or four characters. To enter a character, tap the corresponding key repeatedly until the desired character appears.

37

Getting started
Additional keyboard functions
Drag the icon upwards to use additional keyboard functions.

Discard entered text.

Enter text via voice input. Enter text via handwriting.
Enter emojis.

Change the keyboard settings. Enter numbers and symbols. Enter text via the keyboard.

Some features may not be available depending on the language, service provider, or model.

38

Apps and features
Installing and managing apps
Play Store
Purchase and download apps. Tap (Play Store) on the Apps screen. Browse apps by category or tap and search for apps by keyword.
· Register the Google account on your Watch to use the Play Store app. Launch the Galaxy Wearable app on your smartphone, tap Watch settings Accounts and backup Google account Add Google account, and then follow the on-screen instructions to copy the Google account from the smartphone to your Watch.
· To change the auto update settings, tap Settings and tap the Auto-update apps switch to activate or deactivate it.
Managing apps
Uninstalling or disabling apps
Launch the Galaxy Wearable app on your smartphone, tap Watch settings Apps, tap an app, and then select an option.
· Uninstall: Uninstall downloaded apps. · Disable: Disable selected default apps that cannot be uninstalled from the Watch.
Some apps may not support this feature.
Enabling apps
Launch the Galaxy Wearable app on your smartphone, tap Watch settings Apps, select , and then tap Disabled. Select an app and tap Turn on.
39

Apps and features
Setting app permissions
For some apps to operate properly, they may need permission to access or use information on your Watch. To view or change app permission settings by permission category, on the Apps screen, tap
(Settings) Privacy Permission manager. Select an item and select an app. If you do not grant permissions to apps, the basic features of the apps may not function properly.
Messages
View messages and reply to using the Watch. You may incur additional charges for sending or receiving messages when you are roaming.
The Android Messages app may be available depending on the region, and the settings for the default messages app are synced with the connected smartphone.
Viewing messages 1 Tap (Messages) on the Apps screen.
Or, open the notification panel and view a new message.
2 Scroll through the message list or use the bezel, and then select a contact to view your
conversations. To view a message on your smartphone, tap Show on phone. To reply a message, tap the message input field and enter a message.
40

Apps and features
Sending messages 1 Tap (Messages) on the Apps screen.
Create a new message. Messages list
2 Tap . 3 Tap Recipient or tap to enter a message recipient or phone number. Or, tap and
select a message recipient from the contacts list.
4 Tap the message input field and enter a message or select a text template, and then tap
or . Recording and sending a voice message You can send a voice file after recording what you want to say. On the message input screen, tap and say what you want to be sent.
Stop recording voice.
41

Apps and features
Deleting messages
1 Tap (Messages) on the Apps screen. 2 Scroll through the message list or use the bezel, and then select a contact to view your
conversations.
3 Tap and hold a message, then tap Delete.
To delete multiple messages, tap and hold a message, select messages you want to delete, and then tap Delete. The message will be deleted both from the Watch and the connected smartphone.

Phone

Introduction
You can make calls and check incoming calls and receive them. The sound may not be heard clearly during a call and only brief calls are available in areas with weak signals.
Making calls
Tap (Phone) on the Apps screen.

Keypad

Contacts

Log list

Use one of the following methods to make calls. · Tap , enter a number using the keypad, and then tap . · Tap , use the bezel or scroll through the contact list, select a contact, and then tap . · Use the bezel or scroll through the log list, select a log entry, and then tap .
42

Apps and features
Selecting the number to use for making calls (SM-R905F, SM-R915F, SM-R925F)
You can select the number you want to use between the Watch’s number and the connected smartphone’s number when making calls. Also, if your Watch is connected to a smartphone that supports dual SIM cards, you can select a SIM card to make calls.
1 Tap (Phone) on the Apps screen. 2 Tap . 3 Tap and select the option you want.
· Phone: Make calls with the number of connected smartphone. · SIM 1: Make calls with the number of the connected smartphone’s SIM card 1. · SIM 2: Make calls with the number of the connected smartphone’s SIM card 2. · Watch: Make calls with the Watch’s number.
· Some features may not be available depending on the connected smartphone. · You can also select a number to use by tapping and holding the call button after
selecting a log entry.
Setting a preferred number in advance (SM-R905F, SM-R915F, SM-R925F) 1 Tap (Phone) on the Apps screen. 2 Tap Settings. 3 Tap Preferred number and select the option you want.
· Phone: Set to make calls with the number of connected smartphone. · Watch: Set to make calls with the Watch’s number. · Always ask: Set to always ask which number to use whenever making calls.
When the connected smartphone supports dual SIM cards, you can select the smartphone’s SIM card you want to use. On the Apps screen, tap (Settings) Connections SIM card manager and select a SIM card for making calls under Preferred SIM for calls. If you do not select the SIM card, you have to select a SIM card to use when you make calls.
43

Apps and features
Options during calls
The following actions are available:

Adjust the volume.
Turn off the microphone so that the other party cannot hear you.

Access additional options. End the current call.

The screen’s appearance may differ depending on the model.

Making a phone call with a Bluetooth headset
When a Bluetooth headset is connected, you can make phone calls with it. While the Bluetooth headset is not connected, on the Apps screen, tap (Settings) Connections Bluetooth. When the available Bluetooth devices list appears, select a Bluetooth headset you want to use.

Receiving calls
Answering a call
When a call comes in, swipe the bezel clockwise. Alternatively, drag outside the large circle. You can have phone conversations via the Watch’s internal microphone, speaker, or a connected Bluetooth headset.
Rejecting a call
You can reject incoming calls and send a rejection message to the caller. When a call comes in, swipe the bezel anticlockwise. Alternatively, drag outside the large circle. To send a message when rejecting an incoming call, drag the icon upwards and select the message you want.

44

Apps and features
Missed calls
If a call is missed, a missed call notification is displayed on the notification panel. On the notification panel, view missed call notifications. Alternatively, tap (Phone) on the Apps screen to view missed calls.
Contacts
You can make a call or send a message to a contact. The contacts saved on your connected smartphone will be also saved to your Watch. Tap (Contacts) on the Apps screen.
The favourites list contacts on the smartphone will display on the top of the contacts list. Use one of the following search methods: · Tap and enter the search criteria on the top of the contacts list. · Scroll through the contacts list. · Use the bezel. When you swipe the bezel quickly, the list scrolls by the alphabet of the first letter. Once a contact is selected, take one of the following actions: · : Make a voice call. · : Compose a message.
Selecting the frequently used contacts on the tile
Add the frequently used contacts from the Contacts tile to contact them directly via text message or phone call. Tap Add and select contact.
· To use this feature, you must add the Contacts tile. Refer to Using tiles for more information.
· Up to four contacts can be added on the tile.
45

Apps and features
Samsung Pay
Register cards to Samsung Pay to make payments quickly and securely. You can view more information, such as cards that support this feature at www.samsung.com/samsung-pay.
· To make payments with Samsung Pay, the device may be required a connection to a Wi-Fi or mobile network depending on the region.
· This feature may not be available depending on the service provider or model. · The procedures for the initial setup and card registration may vary depending on the
region or service provider.
Setting up Samsung Pay 1 On your smartphone, launch the Galaxy Wearable app. 2 Tap Watch settings Apps App settings Samsung Pay and follow the on-screen
instruction to complete your card registration.
Making payments 1 To make a payment on your Watch, press and hold the Back key on the Watch screen or on
the Samsung Pay intro page.
2 Enter your PIN or draw the pattern you set. 3 Scroll through the cards list, select a card and tap PAY. 4 Place your Watch close to the card reader.
When the card reader recognises the card information, the payment will be processed.
· Payments may not be processed depending on your network connection. · The verification method for payments may vary depending on the card readers.
46

Apps and features
Samsung Health
Introduction
Samsung Health records and manages your 24-hour activity and sleep pattern to cultivate a healthy habit. You can save and manage health-related data on the Samsung Health app of the connected smartphone. After continuously exercising for more than 10 minutes (for running, 3 minutes) while wearing the Watch, the auto detect workouts feature will be activated. Also the Watch will notify you and show you some stretching motions to follow or it will show you a screen encouraging you to engage in light activity when the Watch recognises inactivity for more than 50 minutes. When your Watch recognises that you are driving or sleeping, it may not notify you and not display a stretching screen although you are physically inactive. Visit www.samsung.com/samsung-health for more information.
Samsung Health features are intended only for leisure, well-being, and fitness purposes. They are not intended for medical use. Before using these features, read the instructions carefully.
Daily activity
Check your current daily status, such as steps, active times, activity calories, and their targets, and related information.
Checking your daily activity
Tap (Samsung Health) on the Apps screen and tap Daily activity.
Target achievement graph
47

Apps and features
· Steps: Check the amount of steps you walk throughout the day. As you approach your step target, the graph will increase.
· Active time: Check the total time you were physically active throughout the day. As you approach your active time target by doing light activities, such as stretching, or walking, the graph will increase.
· Activity cal: Check the total amount of calories you spent doing an activity throughout the day. As you approach your activity calories target, the graph will increase.
To view additional information which is related to your daily activity, use the bezel or swipe upwards or downwards on the screen.
Setting the daily activity target 1 Tap (Samsung Health) on the Apps screen. 2 Tap Daily activity and tap Set targets. 3 Select an activity option. 4 Use the bezel or swipe upwards or downwards on the screen to set the target. 5 Tap Done.
Steps
The Watch counts the number of steps you have taken.
Measuring your step count
Tap (Samsung Health) on the Apps screen and tap Steps.

Current step total Target achievement graph

Target

To view additional information which is related to the steps, use the bezel or swipe upwards or downwards on the screen.
48

Apps and features
· When you start to measure your step, the step tracker monitors your steps and displays your step count after a brief delay because your Watch accurately recognises your movement after you walk for a while. Also, for an accurate step count, you may experience a brief delay before the notification indicates that a certain goal has been reached.
· If you use the steps tracker while travelling by car or train, vibration may affect your step count.
· One floor is calculated as approximately 3 metres. The floors measured may not match the actual floors you climb.
· The floors measured may not be accurate depending on the environment, the user’s movements, and the conditions of buildings.
· The floors measured may not be accurate if water (shower and water activity) or foreign materials enter the atmospheric pressure sensor. If there is any detergent, sweat, or raindrops on the Watch, rinse it with clean water and dry the atmospheric pressure sensor thoroughly before use.
Setting the step target 1 Tap (Samsung Health) on the Apps screen. 2 Tap Steps and tap Set target. 3 Use the bezel or swipe upwards or downwards on the screen to set the target. 4 Tap Done.
49

Apps and features
Exercise
Record your exercise information and check the results. · Before using this feature, pregnant women, the elderly, and young children, users suffering from conditions, such as chronic heart disease or high blood pressure, are recommended to seek the advice of a licensed medical professional. · If you feel dizzy, experience pain, or have difficulty breathing during exercise, stop exercising immediately and seek the advice of a licensed medical professional. · Your heart rate is measured when you start exercising. For accurate measurements, wear the Watch firmly around your lower arm above the wrist. Refer to How to wear the Watch for accurate measurements for more information. · Do not move until your heart rate displays on the screen so it can be measured more accurately. · Your heart rate may not be visible temporarily due to various conditions such as the environment, your physical state, or how the Watch is worn.
Be aware of following conditions before exercising in cold weather conditions: · Avoid using the device in cold weather. If possible, use the device indoors. · If you use the device outside in cold weather, cover the Watch with your sleeves before using it.
50

Apps and features
Starting exercises 1 Tap (Samsung Health) on the Apps screen. 2 Tap Exercise Choose workout.
You can start exercising directly from the Multi-workouts tile after adding workouts to it.
3 Use the bezel or swipe left or right on the screen to select an exercise type you want and
begin. When there is no exercise type you want, tap Add, and then select an exercise type you want.
51

Apps and features
4 Use the bezel or swipe upwards or downwards on the screen to view exercise information,
such as your heart rate, distance, or time, on the workout screen.
You can play music by swiping left on the screen. 52

Apps and features
· When you select Swimming or Swimming (outdoor), water lock mode will be automatically activated and the touchscreen will be disabled.
· When you select Swimming or Swimming (outdoor), the recorded value may not be accurate in following cases: ­ If you stop swimming before reaching the completion point ­ If you change your swimming stroke midstream ­ If you stop moving your arms before reaching the completion point ­ If you kick with your legs on a kickboard or swim without moving your arms ­ If you swim with only one arm ­ If you swim under water ­ If you do not pause or restart the exercise, but finish the exercise while resting
5 Swipe right on the screen and tap Finish.
To pause or restart the exercise, swipe right on the screen and tap Pause or Resume. Alternatively, press and hold the Back key.
· To finish swimming, first press and hold the Home key to deactivate water lock mode, shake your Watch to completely remove any water from it to ensure that the atmospheric pressure sensor will work properly, and then tap OK.
· Music will continue to play even if you finish exercising. To stop playing music, stop music before finishing exercising or launch the Music app or Media Controller app to stop playing music.
6 Use the bezel or swipe upwards or downwards on the screen after finishing the exercise
and view your exercise results.
Doing multiple exercises You can log various exercises and go straight through an entire routine by starting another exercise right after finishing the current exercise. Swipe right on the screen while working out, tap New, and then select the next exercise type to begin.
To finish swimming, first press and hold the Home key to deactivate water lock mode, shake your Watch to completely remove any water from it to ensure that the atmospheric pressure sensor will work properly, and then tap OK.
53

Apps and features
Starting repetitive exercises
When you perform repetitive exercises such as squats or deadlifts, your Watch will count how many times you repeat the motion with beeping.
1 Tap (Samsung Health) on the Apps screen. 2 Tap Exercise Choose workout. 3 Use the bezel or swipe left or right on the screen to select a type of repetitive exercise you
want and begin. When there is no repetitive exercise type you want, tap Add, and then select an exercise type you want.
4 Tap OK and get into the proper position to start by following the pose on the screen.
Counting will begin with beeping.
54

Apps and features
5 Use the bezel or swipe upwards or downwards on the screen to view exercise information,
such as your heart rate, the number of repetition, or calories, on the workout screen.
You can play music by swiping left on the screen.
6 Take a minute’s rest after completing a set. Or, tap Skip if you want to skip to the next set
without resting. The exercise will begin after you get into the proper position to start it by following the pose on the screen.
7 Swipe right on the screen and tap Finish.
To pause or restart the exercise, swipe right on the screen and tap Pause or Resume. Alternatively, press and hold the Back key.
Music will continue to play even if you finish exercising. To stop playing music, stop music before finishing exercising or launch the Music app or Media Controller app to stop playing music.
8 Use the bezel or swipe upwards or downwards on the screen after finishing the exercise
and view your exercise results.
55

Apps and features
Setting the exercise 1 Tap (Samsung Health) on the Apps screen. 2 Tap Exercise Choose workout. 3 Tap under each exercise type and set the various exercise options.
· Pool length: Set the pool length. · Target: Activate the exercise target feature and set it. · Track back: Set to receive navigation guidance to go back to the start point when you
hike or cycle. (SM-R920, SM-R925F) · Workout screen: Set the screens that appear while you are working out. · Coaching messages: Set to receive coaching messages for proper pacing while
working out. · Guide frequency: Set to receive guidance whenever you reach the distance or time
you set. · Auto lap: Set to record the lap time manually by tapping the screen twice quickly or
automatically at the distance or time you set while working out. · Auto pause: Set the Watch’s exercise feature to pause automatically when you stop
working out. · Audio guide: Turn the audio guide on or off.
You can also change certain settings while exercising. While working out, swipe right on the screen and tap Settings.
56

Apps and features
Auto detect workouts feature
Once you have engaged in an activity for more than 10 minutes (for running, 3 minutes) while wearing the Watch, it automatically recognises that you are exercising and records exercise information such as the exercise type, duration and calories burned. When you stop doing some exercises for more than one minute, the Watch automatically recognises that you have stopped exercising and recording will end.
· You can check the list of exercises which are supported by the auto detect workouts feature. On the Apps screen, tap (Samsung Health) and tap Settings Activities to detect. If the exercises are not recognised automatically, turn on the auto detect workouts feature and tap the switch of the exercise type that uses this feature.
· The auto detect workouts feature measures something, such as the time you spent exercising and calories burnt by using the acceleration sensor. The measurements may not be accurate depending on your manner of walking, exercise routines, and lifestyle.
· If you are walking or running, the Watch may provide the feature that allows you to switch to manual exercise after they are automatically recognised. If you want to record in detail, including the course you are working out, switch to manual exercise. In this case, you must finish the Watch’s exercise feature manually when finishing the exercise.
57

Apps and features
Food
Record the calories you eat in a day and compare with your target calories to get help to manage your weight.
Recording the calories 1 Tap (Samsung Health) on the Apps screen. 2 Tap Food. 3 Tap Add, tap the meal type on the top of the screen, and then select an option. 4 Use the bezel or swipe upwards or downwards on the screen to set the caloric intake, and
then tap Done.
To view additional information which is related to the caloric intake, use the bezel or swipe upwards or downwards on the screen.
Deleting logs 1 Tap (Samsung Health) on the Apps screen. 2 Tap Food and tap Delete today’s log. 3 Select data to delete and tap Delete. Setting your caloric intake target 1 Tap (Samsung Health) on the Apps screen. 2 Tap Food and tap Set target. 3 Use the bezel or swipe upwards or downwards on the screen to set the target. 4 Tap Done.
58

Apps and features
Sleep
Analyse your sleep and record it by measuring your heart rate and your movement while you are sleeping.
This feature is only for your general wellness and fitness. Therefore, do not use it for medical purposes, such as diagnosing the symptoms, treatment, or prevention of disease. · The sleep pattern will have its four states (Awake, REM, Light, Deep) analysed by
using your movement and changes in your heart rate while you are sleeping. A graph will be provided with recommended ranges for each measured sleep state. · If your heart rate is irregular or your Watch cannot recognise your heart rate properly, the sleep pattern will be analysed into three states (Restless, Light, Motionless). · You can check the detailed sleep analysis only when your Watch is connected to your smartphone. · Before measuring, charge the Watch’s battery so it is more than 30%. · For accurate measurements, wear the Watch firmly around your lower arm above the wrist. Refer to How to wear the Watch for accurate measurements for more information.
Measuring your sleep 1 Sleep while wearing the Watch.
The Watch will start to measure your sleep.
2 Tap (Samsung Health) on the Apps screen after you wake up. 3 Tap Sleep.
59

Apps and features
4 Use the bezel or swipe upwards or downwards on the screen to view all information
related to your measured sleep.
60

Apps and features
Using the snore detection feature
1 Tap (Samsung Health) on the Apps screen. 2 Tap Settings. 3 Tap Snore detection and activate the feature by following the on-screen instructions.
Your snoring will be measured along with your other sleep records when you sleep while wearing the Watch.
· The snore detection feature can be activated on the Samsung Health app (version 6.18 or higher) of the connected smartphone. Also, you must place the connected smartphone’s microphone so it faces you.
· To always detect your snoring whenever you are sleeping, after setting the snore detection feature to Always, connect your smartphone to the charger before sleeping. If not, snoring may not be measured.
Body composition
Measure your body composition, such as your skeletal muscle mass or fat mass. · This feature is only for your general wellness and fitness. Therefore, do not use it for medical purposes, such as diagnosing the symptoms, treatment, or prevention of disease. · Do not measure your body composition if you have an implanted cardiac pacemaker, defibrillator, or if any other electronic device is inside of your body. · A low electric current goes through your body when measuring your body composition. Although it is harmless to humans, do not measure your body composition if you are pregnant. · For accurate measurements, wear the Watch firmly around your lower arm above the wrist. Refer to How to wear the Watch for accurate measurements for more information. · If the measured body composition results are inaccurate, check your user profile in the Samsung Health app on the smartphone and modify it. · Unlike professional body composition measuring instruments, the Watch, which has to be worn your wrist, measures the upper body’s composition and estimates your entire body’s composition to provide the results. Therefore the measured body composition results may be inaccurate in the following cases: when your upper and lower body’s composition is too unbalanced, when you are extremely obese, or when you have a very large amount of muscles.
61

Apps and features · The Watch uses the Bioelectrical Impedance Analysis (BIA) method when measuring body composition, which has more than 98% correlation compared to the Dual-energy X-ray absorptiometry (DXA) method, which is regarded as the golden standard.
Be aware of following conditions before measuring your body composition: · If you are an individual under the age of 20, the results may not be accurate when you measure your body composition. · You can get more accurate body composition results if you follow the following measurement conditions: ­ Measuring at the same time of the day (recommended to measure in the morning) ­ Measuring on an empty stomach ­ Measuring after going to the bathroom ­ Measuring when you are not having your menstrual period ­ Measuring before doing activities that cause your body temperature to rise, such as exercising, taking showers, or going to the sauna. ­ Measuring after removing metal objects from your body, such as necklace ­ Using the band included with the product instead of a metallic band
62

Apps and features
Measuring your body composition 1 Tap (Samsung Health) on the Apps screen. 2 Tap Body composition. 3 Tap Measure. 4 Enter your weight and tap Confirm.
· For accurate body composition measurements, you must enter your actual height, weight, and gender on the Samsung Health app profile of the connected smartphone, and also enter the actual birthday on your Samsung account.
· You can view how to measure your body composition in detail on the screen by tapping How to measure.
5 Place your two fingers on the Home and Back keys by following the on-screen instructions
to begin measuring your body composition.
Correct posture for measuring your body composition when wearing the Watch on your left wrist
Correct measurement posture · Put both of your arms to chest level while not making contact with your body. · Do not allow the two fingers that are placed on the Home and Back keys to come
into contact with each other. Also do not touch the other part’s of your Watch with your fingers except the keys. · Stay stable and do not move for accurate measurement results. · The signal may experience interruptions when your finger is dry. In this case, measure your body composition after applying toner or lotion to make your finger’s skin moist. · Measurement results may not be accurate due to the dryness of your skin or hair. · Wipe the back of the Watch clean before measuring for accurate measurement results.
63

Apps and features
Check measured body composition results on the screen.
To view the additional information which is related to the body composition, use the bezel or swipe upwards or downwards on the screen.
Cycle tracking
Enter your menstrual period to begin tracking your cycle. When you are managing and tracking your menstrual cycle, you can predict date like your next period.
· This feature is only for managing and tracking your menstrual cycle. Therefore, do not use it for medical purposes, such as diagnosing the symptoms, treatment, or prevention of disease.
· This feature is not intended to be used for pregnancy planning or contraception purposes.
· Predicted dates are only for personal reference. Predicted dates may differ from actual dates.
· Individuals under the age of 18 should use this feature with a guardian. · Do not make any medical decisions based on predicted dates without consulting a
physician. Also, do not use the information provided from the Samsung Health app or take medical actions without consulting with a qualified medical expert. · Activate the cycle tracking feature in the Samsung Health app on your smartphone to use this feature on your Watch. · Predicted dates may not be accurate if you are currently taking birth control or undergoing hormone therapy to suppress ovulation. · Predicted dates may vary depending on the input information.
64

Apps and features
1 Tap (Samsung Health) on the Apps screen. 2 Tap Cycle tracking. 3 Tap Enter period. 4 Tap the input field, use the bezel or swipe upwards or downwards on the screen to set
your period’s start date.
5 Tap Save. 6 Use the bezel or swipe upwards or downwards on the screen to view all information
related to your cycle tracking.
Heart rate
Measure and record your heart rate. The Watch’s heart rate tracker is intended for fitness and informational purposes only and is not intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or prevention of disease. For accurate measurements, wear the Watch firmly around your lower arm above the wrist. Refer to How to wear the Watch for accurate measurements for more information.
Be aware of following conditions before measuring your heart rate: · Rest for 5 minutes before taking measurements. · If the measurement is very different from the expected heart rate, rest for 30 minutes and then measure it again. · During winter or in cold weather, keep yourself warm when measuring your heart rate. · Smoking or consuming alcohol before taking measurements increases heart rate and may cause your heart rate to be different from your normal heart rate. · Do not talk, yawn, or breathe deeply while taking heart rate measurements. Doing so may cause your heart rate to be recorded inaccurately. · Heart rate measurements may vary depending on the measurement method and the environment they are taken in. · If the sensor is not working, check the Watch’s position on your wrist and make sure nothing is obstructing the sensor. If the sensor continues to have the same problem, visit a Samsung Service Centre or an authorised service centre.
65

Apps and features
Measuring your heart rate manually 1 Tap (Samsung Health) on the Apps screen. 2 Tap Heart rate. 3 Tap Measure to begin measuring your heart rate.
Check the measured heart rate on the screen.
To view additional information which is related to the heart rate, use the bezel or swipe upwards or downwards on the screen.
Changing the heart rate measurement settings 1 Tap (Samsung Health) on the Apps screen. 2 Tap Settings. 3 Tap Heart rate and select the measurement settings under Measurement.
· Measure continuously: Your heart rate will be measured continuously. · Every 10 mins while still: Your heart rate will be measured every 10 minutes while
resting. · Manual only: Your heart rate will be measured manually only when tapping Measure.
Setting the heart rate alert
You can receive an alert when your heart rate is higher or lower than the resting heart rate value you set and it lasts more than 10 minutes.
1 Tap (Samsung Health) on the Apps screen. 2 Tap Settings.
66

Apps and features
3 Tap Heart rate and set the alert under Heart rate alert.
· High HR: Set to receive an alert when your heart rate is consistently higher than the heart rate value you set.
· Low HR: Set to receive an alert when your heart rate is consistently lower than the heart rate value you set.
Stress
Check your stress level by using your real time bio-markers and reduce your stress by following the breathing exercise that the Watch provides.
· The more frequently you measure your stress level, the more accurate your results will be due to the accumulated data.
· Your measured stress level is not necessarily related to your emotional state. · Your stress level may not be measured, while you are sleeping, working out, moving
a lot, or immediately after you finish a workout. · For accurate measurements, wear the Watch firmly around your lower arm above
the wrist. Refer to How to wear the Watch for accurate measurements for more information. · This feature may not be available depending on the region.
Measuring your stress level manually 1 Tap (Samsung Health) on the Apps screen. 2 Tap Stress. 3 Tap Measure to begin measuring your stress level.
Check the measured stress level on the screen.
67

Apps and features
Alleviating stress with the breathing exercise 1 Tap (Samsung Health) on the Apps screen. 2 Tap Stress and move to the breathe screen by using the bezel or swiping upwards on the
screen.
3 Tap or to change the number to breathe. To change the breathe duration, tap
Breathe duration.
4 Tap Start and start breathing.
To stop the breathing exercise, tap on the screen and tap .
Blood oxygen
Measure your blood’s oxygen level to check whether your blood is properly delivering oxygen to the different parts of your body.
This feature is only for your general wellness and fitness. Therefore, do not use it for medical purposes, such as diagnosing the symptoms, treatment, or prevention of disease. Be aware of following conditions before measuring your blood oxygen level: · Rest for 5 minutes before taking measurements. · During winter or in cold weather, keep yourself warm when measuring your blood oxygen level. · Blood oxygen level measurements may vary depending on the measurement method and the environment they are taken in.
Measuring your blood oxygen level manually 1 Tap (Samsung Health) on the Apps screen. 2 Tap Blood oxygen.
68

Apps and features
3 Tap Measure to begin measuring your blood oxygen level.
Correct measurement posture · For accurate measurements, wear the Watch firmly around your lower arm above the
wrist while leaving two fingers’ worth of space as shown in the figure below. Also, place your elbow on the table while positioning your wrist close to your heart.
· Do not move and stay in the correct posture until finishing measurement. · You can view how to measure your blood oxygen level in detail on the screen by
tapping How to measure. Check the measured blood oxygen level on the screen. If your resting blood oxygen level is between 95% and 100%, it is assumed to be within the normal range.
69

Apps and features
Measuring your blood oxygen level while sleeping
Set to measure your blood oxygen level continuously while sleeping.
1 Tap (Samsung Health) on the Apps screen. 2 Tap Settings. 3 Tap the Blood oxygen during sleep switch to activate it.
Your sleeping blood oxygen level will be measured along with your other sleep records when you sleep while wearing the Watch.
· If you set it to measure your blood oxygen level continuously while sleeping, the battery will drain more quickly than normal.
· You can see the light due to the flickering optical heart rate sensor while measuring your blood oxygen level.
· The Watch may measure your blood oxygen level even if you are not sleeping because your Watch can recognise your sleep status even while reading books or watching TV or movies.
· Wear the Watch firmly, ensuring that you are not making space between your wrist and the Watch due to turning over in your sleep.
Water
Record and track how many glasses of water you drink.
Recording water consumption 1 Tap (Samsung Health) on the Apps screen. 2 Tap Water. 3 Tap when you drink a glass of water.
If you accidentally added an incorrect value, you can fix it by tapping .
Setting your target consumption 1 Tap (Samsung Health) on the Apps screen. 2 Tap Water and tap Set target. 3 Use the bezel or swipe upwards or downwards on the screen to set the daily target. 4 Tap Done.
70

Apps and features
Together
Compare your step count records with your friends who also use the together feature of the Samsung Health app. When you start step challenges with your friends, you can view the challenge status on your Watch.
1 Tap (Samsung Health) on the Apps screen. 2 Tap Together.
Tap Show on phone to view detailed information such as the status of the challenge with your friends who are also using the together feature or the step count rankings for the last seven days on your smartphone.
Activate the together feature in the Samsung Health app on your smartphone to check the together information on your Watch.
Settings
You can set the various setting options related to exercise and fitness. Tap (Samsung Health) on the Apps screen and tap Settings.
· Measurement: Set how to measure your heart rate and stress, and turn the additional features that can be measured during sleep on or off.
· Auto detect workouts: Set the auto detect workouts feature and select the exercise types to be detected.
· Inactive time: Set the time and days for receiving alerts after 50 minutes of inactivity. · Share data with devices and services: Set to share information with other connected
health platform apps, exercise machines, and TVs.
71

Apps and features
Samsung Health Monitor
Introduction
You can conveniently measure your blood pressure or ECG whenever you want to check them with the Samsung Health Monitor app of your Watch that includes both the optical heart rate sensor and electrical biosensor. You can check the measurement history using the Samsung Health Monitor app on your smartphone since your Watch and smartphone have been synced automatically. Manage your health more systemically with your physician based on your measurement results.
· If you have not installed the Samsung Health Monitor app on your connected smartphone, launch the Samsung Health Monitor app on your Watch and follow the on-screen instructions to download it from the Galaxy Store on the smartphone.
· The Samsung Health Monitor app is only supported on the Samsung smartphones. · Individuals under the age of 22 cannot use the Samsung Health Monitor app to
measure your blood pressure or take your ECG. · This feature may not be available depending on the region.
Precautions for measuring blood pressure and ECG
Common precautions · The Samsung Health Monitor app cannot be used for medical purposes, such as
diagnosing hypertension, cardiac disorders, and other heart conditions. Do not use this app for purpose of replacing a physician’s medical judgment or treatment under any circumstances. In case of an emergency, contact a nearby hospital immediately. · Do not change your medication, dosage, or usage without your physician’s advice. · The readings and results from the Samsung Health Monitor app are only for reference. Do not use them for making medical decisions without your physician’s opinion under any circumstances. · For accurate measurements, wear the Watch firmly around your lower arm above the wrist. Refer to How to wear the Watch for accurate measurements for more information.
72

Apps and features
· Before measuring your blood pressure or ECG, prepare a comfortable chair and a table to rest your arm and smartphone on.
· Seat yourself in the comfortable chair you prepared with your back supported. Do not sit with your legs crossed, and keep both of your feet on the ground.
· Be sure to place your arm comfortably on a table when you are measuring your blood pressure or taking an ECG.
· Rest for at least five minutes in a comfortable position before measuring your blood pressure or taking your ECG.
· Measure your blood pressure or ECG in a quiet place indoors. · Do not measure your blood pressure or ECG while engaging in physical activity. · Stay still and do not speak once you start measuring your blood pressure or taking
your ECG, and do not move or speak until the measurement is complete. · Do not measure your blood pressure or take your ECG when you are in close vicinity
of machines that produce strong electronic fields, such as MRIs (Magnetic Resonance Imaging), X-ray machines, electromagnetic anti-theft systems, or metal detectors. · Always connect your Watch to your smartphone at home or in a safe place via Bluetooth for security reasons. It is not recommended to connect to a smartphone in a public place. · Do not measure your blood pressure or take your ECG during medical treatments, such as operations or defibrillation. · Measure your blood pressure or ECG in an environment where the temperature is between 12 °C to 40 °C, and the relative humidity is between 30% to 90%.
73

Apps and features
Precautions for measuring the blood pressure · Avoid consuming alcohol, food that includes caffeine, smoking, exercising, and
taking a bath 30 minutes before measuring your blood pressure. · Make sure your wrist is dry when measuring your blood pressure and do not measure
it when you have applied lotion or are sweating excessively. · Do not take a deep breathe or breathe slowly on purpose, but breath as usual while
measuring your blood pressure. · If you are pregnant, your results may not be accurate when you measure your blood
pressure. · Do not measure your blood pressure with the Samsung Health Monitor app if you
have any of the following conditions: ­ Arrhythmia ­ Underlying heart disease or have suffered a heart attack ­ Circulatory or peripheral vascular disease ­ Valvular heart disease (Aortic valve disease) ­ Myocardiopathy ­ Other cardiovascular disease ­ End-stage renal disease (ESRD) ­ Diabetes ­ Neurotic disorders (e.g. shivering) ­ Hemostatic disorders or if you are taking a blood thinner
· Do not use a wrist that has been tattooed or has marks on it when measuring your blood pressure because the optical heart rate sensor may be affected by the tattoos or marks.
· The Samsung Health Monitor app calibrates and measures blood pressure based on the readings from the arm that is wearing the blood pressure manometer. You must consult your physician if there is a large difference between the blood pressure in both of your arms (more than 10 mmHg).
74

Apps and features
· Do not use a Watch which has been calibrated for other people for measuring your blood pressure.
· The measurable reading range of the Samsung Health Monitor app for blood pressure is as follows: If it has been calibrated, the systolic blood pressure range is 80 mmHg to 170 mmHg, and the diastolic blood pressure is 50 mmHg to 110 mmHg. In case of measurement, the systolic blood pressure range is 70 mmHg to 180 mmHg, and the diastolic blood pressure is 40 mmHg to 120 mmHg.
· The signal may be affected by the brightness of the individual’s skin, the amount of blood under their skin, and the cleanliness of the sensor.
Precautions for measuring the ECG · Make sure your wrist is not too dry when measuring your ECG. You can get a more
accurate ECG signals when your skin that comes in contact with the sensor is moist with a moderate amount of sweat, toner, or lotion. · Do not measure your ECG if you have an implanted cardiac pacemaker, defibrillator, or if any other electronic device is inside of your body. · If you are pregnant, the results may not be accurate when you take your ECG. · Do not take your ECG with the Samsung Health Monitor app if you have arrhythmia, unless it is because of atrial fibrillation. · The Samsung Health Monitor app cannot detect heart attacks. If you have any suspicious symptoms of a heart attack, contact emergency services immediately.
Starting to measure the blood pressure
Presetting before measuring the blood pressure
Enter your profile on the Samsung Health Monitor app and calibrate your Watch before measuring your blood pressure. If you do not enter a profile, you cannot measure your blood pressure, and if you do not calibrate the Watch or have someone else calibrate it, the readings will be invalid.
Be sure to calibrate the Watch with cuff-typed blood pressure manometer when measuring your blood pressure with the Samsung Health Monitor app for the first time after purchasing the Watch. Afterwards, recalibrate it every 28 days. The cuff-typed blood pressure manometer is sold separately.
75

Apps and features
1 Tap (Samsung Health Monitor) on the Apps screen. 2 Tap Blood pressure Open phone app.
The Samsung Health Monitor app will be launched on your smartphone.
3 Tap Accept. 4 Enter your profile information, such as your name, gender, and birthday, and tap
Continue.
5 Tap Calibrate the watch. 6 Wear the cuff of the blood pressure manometer on the upper part of the arm not wearing
the Watch. Refer to the blood pressure manometer’s user manual for more information about correctly wearing the cuff.
7 Follow the on-screen instructions to complete the calibration. Measuring your blood pressure
You can measure your blood pressure by using your Watch’s optical heart rate sensor without using any other medical devices, such as the cuff-typed blood pressure manometer, after calibration.
You have to wear your Watch on the same wrist used for calibration.
1 Tap (Samsung Health Monitor) on the Apps screen. 2 Tap Blood pressure Measure.
Check the measured systolic and diastolic blood pressure and pulse rate on the screen.
76

Apps and features
Checking the readings
Check the readings on the Watch’s screen after measuring your blood pressure. You can view the previous readings and information on the connected smartphone’s Samsung Health Monitor app. Share, delete, and manage your results on the smartphone’s Samsung Health Monitor app. If your readings are abnormally high or low and feel some unusual physical symptoms, contact a nearby hospital immediately for proper medical attention. Measure at least 2 more times again if you are judged not to be in an emergency situation.
Starting to measuring the ECG
Presetting before measuring the ECG
Enter your profile on the Samsung Health Monitor app before measuring your ECG. If you do not enter a profile, you cannot measure your ECG.
1 Tap (Samsung Health Monitor) on the Apps screen. 2 Tap ECG Open phone app.
The Samsung Health Monitor app will be launched on your smartphone.
3 Tap Accept. 4 Enter your profile information, such as your name, gender, and birthday, and tap
Continue.
5 Tap Get started and follow the on-screen instructions to get ready for measuring your
ECG.
77

Apps and features
Measuring the ECG
Manage your health by checking your heart status conveniently in advance through the ECG measurement results.
1 Tap (Samsung Health Monitor) on the Apps screen. 2 Tap ECG OK and place a finger lightly on the electrical biosensor. Do not leave any
space between your wrist and your Watch.
Electrical biosensor
The measurement will start and the ECG wave will appear on the screen.
3 Tap Add to select additional physical symptoms that you are currently experiencing after
the measurement and tap Save.
4 Tap Done.
78

Apps and features
Checking the results
Check the results and ECG wave on the Watch and the connected smartphone’s Samsung Health Monitor app screen after taking your ECG. The ECG wave shows heart rate rhythm and electric activities of your heart, and it is divided into several parts. Share the ECG graph and results with your physician to get an accurate diagnosis through a more thorough checkup when you find an abnormal results from your ECG wave and readings. You can view the previous results and information on the connected smartphone’s Samsung Health Monitor app. Share, delete, and manage your results on the smartphone’s Samsung Health Monitor app.
· Sinus rhythm: A normal heartbeat rhythm that is between 50 – 100 BPM. · AFib: A type of arrhythmia where the heart beats irregularly. Consult your physician. · Inconclusive: The result is not a type of Sinus rhythm nor AFib and falls into one of the
following conditions: ­ When the heart rate is less than 50 or more than 100 BPM while recording the ECG
wave and there is also no AFib ­ When the ECG wave is not sorted as Sinus rhythm nor AFib ­ When the heart rate is more than 120 BPM and the ECG wave indicates AFib · Poor recording: It appears when the signals used for analysing the ECG measurement result is not measured properly. If this case, take the measurement again.
Contact to your physician or a nearby hospital if Inconclusive or Poor recording appears continuously and you feel some unusual physical symptoms. · If Poor recording appears continuously, wipe out the electrical biosensor and
measure your ECG again. The signal may be experiencing interruptions due to the dryness of the skin on the sensor or hair on your wrist. In this case, measure your ECG after applying toner or lotion to make your skin moist or after removing some hair first. · If the ECG wave appears upside down, it may not be analysing properly. Wear your Watch in the correct direction and measure your ECG again after checking the settings on the wrist you wear it on. You can set the Watch to match the wrist you wear it on, whether it is the left or right, by tapping (Settings) on the Apps screen and tapping General Orientation.
79

Apps and features
GPS
The Watch has a GPS antenna so that you can check your real-time location information without connecting to a smartphone. On the Apps screen, tap (Settings) Location and tap the switch to activate it.
· When your Watch and smartphone are connected, this feature uses your smartphone’s GPS. Activate the smartphone’s location feature to use the GPS sensor.
· The GPS antenna in your Watch will be used when using the Samsung Health feature and the health platform apps, even though your Watch is connected to your smartphone.
· GPS signal strength may decrease in locations where the signal is obstructed, such as between buildings or in low-lying areas, or in poor weather conditions.

Music
Listen to music saved in your Watch. Tap (Music) on the Apps screen. Drag the icon upwards and tap Library to open the Library screen. On the Library screen, you can view the playlist and arrange music by tracks, albums, and artists.

Pause and resume playback.

Restart the currently playing file or skip to the previous file. Tap and hold to move backwards quickly.

Skip to the next file. Tap and hold to move forwards quickly.

Adjust the volume.

Add to favourites.

To save music in your Watch, launch the Galaxy Wearable app on your smartphone, tap Watch settings Manage content Add tracks, select music you want to send to the Watch from the connected smartphone, and then tap Add to watch.

80

Apps and features
Media Controller
Introduction
Control the media app installed on your Watch or the connected smartphone to play or pause music and video.
To launch this app automatically from your Watch when you play music or videos on the connected smartphone, on the Apps screen, tap (Settings) Display and tap the Show media controls switch to activate it.
Controlling the music player
1 Tap (Media Controller) on the Apps screen. 2 Select Phone or Watch.
When you select Phone, you can play music on the connected smartphone’s music app and you can control the music player with your Watch. When you select Watch, you can play music on your Watch’s music app and you can listen to music with your Watch’s speaker or a connected Bluetooth headset.

Restart the currently playing file or skip to the previous file. Tap and hold to move backwards quickly.
Select the audio output.
Controlling the video player
1 Play video on the connected smartphone. 2 Tap (Media Controller) on the Apps screen. 3 Tap Phone.
You can control the video player with your Watch.

Skip to the next file. Tap and hold to move forwards quickly.
Pause and resume playback.
Adjust the volume.

81

Apps and features
Reminder
Register to-do items as reminders and receive notifications according to the condition you set.
· To receive reminder notifications in a specific place, you have to connect your Watch to your smartphone via Bluetooth. However, the feature for setting you to receive reminder notifications in a specific place is only available on your smartphone.
· All reminders on your Watch will be synced with the connected smartphone automatically so that you can also receive alarms and check them from the smartphone.
1 Tap (Reminder) on the Apps screen and tap Write.
If you have a saved reminder, tap on the top of the reminders list.
2 Enter the reminder. 3 Tap Set time to set a notification. 4 Tap the input field, use the bezel, or swipe upwards or downwards on the screen to set the
time, and tap Next.
5 Set other notification options, such as the date when to receive the notification and
whether to repeat the notification, and tap Done.
6 Tap Save.
The saved reminder is added to the reminders list and the reminder will display at the time you set with an alarm.
Completing reminders
On the reminders list, tap or select a reminder and tap Complete.
Restoring reminders Restore reminders that have been completed. 1 On the reminders list, tap Completed. 2 Select a reminder to restore and tap Restore.
Reminders will be added to the reminders list and you will be reminded again.
Deleting reminders
Tap and hold the reminder on the reminder list, and then tap Delete.
82

Apps and features
Calendar
You can check the 7-day schedules of events that you saved in your smartphone on your Watch. Tap (Calendar) on the Apps screen to check the schedules of events that you saved in your smartphone. To add your schedule, tap Show on phone and add it on the connected smartphone.
Bixby
Bixby is a user interface that helps you use your Watch more conveniently. You can talk to Bixby. Bixby will launch a function you request or show the information you want. Visit www.samsung.com/bixby for more information.
· Make sure the Watch’s microphone is not obstructed when you are speaking into it. · Bixby is only available in some languages, and certain features may not be available
depending on your region.
Starting Bixby
Press and hold the Home key to launch Bixby. The Bixby intro page will appear. Complete the setup by following the on-screen instructions. If you cannot launch Bixby with the Home key, on the Apps screen, tap (Settings) Advanced features Customise keys, tap Press and hold under Home key, and then select Bixby.
Using Bixby
While pressing and holding the Home key, say what you want to Bixby, and then release your finger from the key. Alternatively, say “Hi, Bixby” after turning on the screen and say what you want. For example, while pressing and holding the Home key, say “How’s the weather today?”The weather information will appear on the screen with voice feedback. If you want to know the weather tomorrow, while pressing and holding the Home key, just say “Tomorrow?”
83

Apps and features
If Bixby asks you a question during a conversation, while pressing and holding the Home key, answer Bixby. Or, tap and answer Bixby.
Tips for better voice recognition · Speak clearly. · Speak in quiet places. · Do not use offensive or slang words. · Avoid speaking in dialectal accents. The Watch may not recognise your commands or may perform unwanted commands depending on your surroundings or how you speak. Waking up Bixby using your voice You can start a conversation with Bixby by saying “Hi, Bixby”.
1 Tap (Bixby) on the Apps screen. Alternatively, press and hold the Home key. 2 Tap Settings Voice wake-up. 3 Tap the Voice wake-up switch to activate it.
Weather
View weather information on the Watch for locations set on the connected smartphone. Tap (Weather) on the Apps screen. To view the weather information, such as the time-specific weather or weekly information, use the bezel or swipe upwards or downwards on the screen. To add another city’s weather information, tap your current location at the top of the screen, tap Manage on phone, and then add the city from the connected smartphone.
84

Apps and features
Alarm
Set and manage the Watch’s alarms and the smartphone’s alarms individually. When your Watch is connected to your smartphone via Bluetooth, you can check all alarm lists on your smartphone from the Watch.
Setting alarms 1 Tap (Alarm) on the Apps screen. 2 Tap Add on watch to set alarms that only go off on your Watch.
You can also add an alarm from the connected smartphone by tapping Add on phone.
3 Tap the input field, use the bezel or swipe upwards or downwards on the screen to set the
alarm time, and tap Next.
4 Set other alarm options, such as the date when to go off and whether to repeat the alarm,
and tap Save. The saved alarm is added to the alarms list. To activate or deactivate alarms, tap the switch next to the alarm in the alarms list.
Stopping alarms
Drag outside the large circle to stop an alarm. Alternatively, swipe the bezel clockwise. If you want to use the snooze function, drag outside the large circle. Alternatively, swipe the bezel anticlockwise.
Deleting alarms
In the alarms list, tap and hold an alarm, and then tap Delete.
World Clock
Tap (World Clock) on the Apps screen to view the world clocks added from the smartphone. To add a world clock, tap Add on phone. Or, if you have added world clocks, tap Manage on phone, and then add or remove a world clock on the connected smartphone.
85

Apps and features
Timer
Setting a timer 1 Tap (Timer) on the Apps screen. 2 Tap . 3 Tap the input field, use the bezel or swipe upwards or downwards on the screen to set the
duration, and tap . If you select a preset, the timer will start right away. You can also view more presets by using the bezel or swiping upwards or downwards on the screen.
Dismissing a timer
Drag outside the large circle when your timer goes off. Alternatively, swipe the bezel clockwise. To restart the timer, drag outside the large circle. Alternatively, swipe the bezel anticlockwise.
Stopwatch
1 Tap (Stopwatch) on the Apps screen. 2 Select the stopwatch style you want by using the bezel or swiping left or right on the
screen. To change the stopwatch style, tap and hold the screen.
3 Tap Start to time an event.
To record lap times while timing an event, tap Lap or .
4 Tap Stop or to stop timing.
· To restart the timing, tap Resume or . · To clear lap times, tap Reset or .
86

Apps and features
Gallery
Importing and exporting images
Importing images from your smartphone 1 Launch the Galaxy Wearable app on your smartphone. 2 Tap Watch settings Manage content. 3 Tap Add images. 4 Select a category, select files, and then tap Done.
To sync images on your smartphone with your Watch, tap the Auto sync switch under Gallery to activate it. Then, tap Albums to sync, select albums to import to your Watch, and then tap Done. The selected albums will be automatically synced with your Watch when it has more than 15 % of remaining battery power, when its storage is more than 50 MB, and when power saving mode is deactivated on your Watch.
Exporting images to your smartphone 1 Tap (Gallery) on the Apps screen. 2 Tap and hold the image to export it. 3 Use the bezel or swipe left or right on the screen and select any images to export more.
To select all images, tap All.
4 Tap .
You can view the exported images in apps like Gallery on your smartphone.
Viewing images
View and manage the images saved on your Watch.
1 Tap (Gallery) on the Apps screen. 2 Use the bezel or swipe upwards or downwards on the screen to scroll through the image
list and select an image.
87

Apps and features
Zooming in or out
While viewing an image, double-tap the image quickly, spread your two fingers apart, or pinch on an image to zoom in or out. When an image is magnified, you can view the rest of the image by scrolling around the screen.
Deleting images
1 Tap (Gallery) on the Apps screen. 2 Tap and hold the image to delete it. 3 Use the bezel or swipe left or right on the screen and select any images to delete more.
To select all images, tap All.
4 Tap .
Find My Phone
If you misplace the smartphone, the Watch can help you find it.
1 Tap (Find My Phone) on the Apps screen. 2 Tap Start.
The smartphone will make a sound and vibrate, and its screen will turn on. To stop making sound and vibrating, tap and drag it on the smartphone, or tap Stop on the Watch.
88

Apps and features
Find My Watch
If you misplace your Watch, the Galaxy Wearable app on your connected smartphone or the SmartThings Find feature of the SmartThings app installed on your connected smartphone can help you find it.
The screen may be switched automatically to find your Watch with the SmartThings Find feature if the connected smartphone supports the SmartThings Find feature.
Finding with the Galaxy Wearable app 1 Launch the Galaxy Wearable app on your smartphone and tap Find My Watch. 2 Tap Start.
The Watch will make a sound and vibrate, and its screen will turn on. To stop making sound and vibrating, drag outside the large circle on the Watch. Alternatively, swipe the bezel. You can also stop it by tapping Stop on the smartphone. Controlling the Watch remotely When your Watch is lost or stolen, launch the Galaxy Wearable app on your smartphone, tap Find My Watch Set security, and then control your Watch remotely.
Finding with the SmartThings Find feature of the SmartThings app
Launch the Galaxy Wearable app on your smartphone and tap Find My Watch. The SmartThings Find screen of the SmartThings app will appear on the smartphone and you can check your misplaced Watch’s location on the map. Also, you can find it by following the sound emitted from your Watch.
89

Apps and features
Sending an SOS
Introduction
In an emergency, you can send an SOS message that includes your location information to previously registered contacts, or you can set it up your Watch to send an SOS message automatically when you are hurt from a fall and your Watch recognises it. Also, you can set the Watch to automatically make an emergency call to a previously registered contact.
· If the GPS feature is not activated on your Watch when sending an SOS, the GPS feature will be activated automatically to send the location information.
· Your location information may not be sent depending on your region or situation.
Registering the emergency contacts
Register the emergency contact to send an SOS message and make an emergency call to in an emergency.
1 Launch the Galaxy Wearable app on your smartphone and tap Watch settings Safety
and emergency.
2 Tap Send messages to. 3 Tap Create contact and enter new contact information or tap Select from Contacts to
add an existing contact as an emergency contact. You can select a contact to make an emergency call to from the contacts you registered for SOS messages. Launch the Galaxy Wearable app on your smartphone, tap Watch settings Safety and emergency Make SOS call to, and then select a contact.
Requesting an SOS
Setting the SOS request 1 Launch the Galaxy Wearable app on your smartphone and tap Watch settings Safety
and emergency.
2 Tap SOS with Home key and tap the switch to activate it.
To set a delay time for sending an SOS message that will give you time to cancel the message after quickly pressing the Watch’s Home key several times, tap the Count down before sending switch to activate it.
90

Apps and features
Sending an SOS request
In an emergency, quickly press the Watch’s Home key several times. The SOS message will be sent and the emergency call will be made to the previously registered contacts. The icon will appear on the Watch screen while sending an SOS message and you can check the SOS request result on the notification panel after the SOS message has been sent.
Requesting an SOS when you are hurt from a fall
Setting the SOS request when you are hurt from a fall 1 Launch the Galaxy Wearable app on your smartphone and tap Watch settings Safety
and emergency.
2 Tap Hard fall detection and tap the switch to activate it.
Select the condition in which your Watch will detect the hurt from a fall under When to detect falls.
Sending an SOS request when you are hurt from a fall
When a big impact occurs, the Watch will detect the hurt from a fall through your arm’s movement and it will display the notification while vibrating and emitting sound. If you do not respond within 60 seconds, a siren will sound for 30 seconds, and then an SOS message will be sent out automatically. Then emergency call will be made to a previously registered contact. After the Watch detects your fall, cancel the alert not to send the SOS message whenever you want or send an SOS message manually.
The Watch may believe that you have been hurt in a fall if you are doing a high impact exercise. If it is so, cancel the alert not to send the SOS message.
91

Apps and features
Stopping SOS messages
When the icon appears on the Watch screen, check your location information sharing status on the notification panel. To stop sharing your location information, tap the screen and tap Stop sharing .
If you do not stop sending SOS messages, additional messages that include your location information will be continuously sent to the previously registered contacts every 15 minutes for 24 hours after the first SOS message is sent. However, the message will be sent only when your current location is some distance away from the location where the last message is sent.
Voice Recorder
Record or play voice recordings.
Making voice recordings 1 Tap (Voice Recorder) on the Apps screen. 2 Tap to start recording. Speak into the Watch’s microphone.
To pause recording, tap .

Change the recording mode.

Check your saved recordings.

Start recording.
3 Tap to finish recording.
The recording will be saved automatically.
4 To listen to the recorded sound, select a recording file and tap Play.

92

Apps and features
Changing the recording mode
Tap (Voice Recorder) on the Apps screen. Select a mode you want.
· : This is the normal recording mode. · : The Watch records your voice for up to 10 minutes, converts it to text, and then
saves it. For best results, keep the Watch near your mouth and speak loudly and clearly in a quiet place.
If the speech-to-text language does not match the language you are speaking, the Watch will not recognise your voice. Before using this feature, tap Speech-to-text to set the speech-to-text language.
Calculator
You can perform simple calculations. Tap (Calculator) on the Apps screen. You can use this app when leaving a tip or using the unit conversion tool by dragging the icon upwards.
Compass
You can use your Watch as a compass. Tap (Compass) on the Apps screen. You can check additional information, such as the incline, altitude, and atmospheric pressure, by dragging the icon upwards.
The presence of magnetic substances, such as the wireless charger, may affect to your Watch’s internal compass sensor and lower its accuracy. Drag the icon upwards and tap Calibrate to calibrate the compass by swinging the wrist you are wearing the Watch on.
93

Apps and features
Buds Controller
You can check the battery status of the Galaxy Buds connected to the Watch and change their settings. Tap (Buds Controller) on the Apps screen.

Camera Controller
You can remotely control the cameras of the smartphone connected to the Watch and take pictures or record videos from a distance.
1 Tap (Camera Controller) on the Apps screen.
The Camera app will be launched on the connected smartphone.
2 Check the preview screen, and tap to take a picture or tap to record a video.
To change the shooting mode, tap or .
Select the length of the delay before the camera automatically takes a picture.

Preview thumbnail

Change the shooting mode.

Take a picture.
This app may not be available depending on the connected smartphone.

Samsung Global Goals
The Global Goals, which were established by the United Nations General Assembly in 2015, consist of goals that aim to create a sustainable society. These goals have the power to end poverty, fight inequality, and stop climate change.
With Samsung Global Goals, learn more about the global goals and join the movement for a better future.

94

Apps and features
Google apps
Google provides some apps for Watch. You may require a Google account to access some apps.
· Maps: Find your location on the map and search the world map. · Messages: Send and receive messages on your Watch or smartphone.
Some apps may not be available depending on the service provider or model.
Settings
Introduction
Customise settings for functions and apps. Set your Watch depending on your usage pattern by configuring the various settings. Tap (Settings) on the Apps screen.
Some features in Settings may not be available depending on the region, service provider, or model.
Samsung account
Register the Samsung account on your connected smartphone or check the previously registered Samsung account. On the Settings screen, tap Samsung account.
Connections
Bluetooth
Connect to a smartphone via Bluetooth. You can also connect other Bluetooth- enabled devices, such as a Bluetooth headset or computer. On the Settings screen, tap Connections Bluetooth.
95

Apps and features
Precautions for using Bluetooth
· Samsung is not responsible for the loss, interception, or misuse of data sent or received via Bluetooth.
· Always ensure that you share and receive data with devices that are trusted and properly secured. If there are obstacles between the devices, the operating distance may be reduced.
· Some devices, especially those that are not tested or approved by the Bluetooth SIG, may be incompatible with your device.
· Do not use the Bluetooth feature for illegal purposes (for example, pirating copies of files or illegally tapping communications for commercial purposes). Samsung is not responsible for the repercussion of illegal use of the Bluetooth feature.
Wi-Fi
Activate the Wi-Fi feature to connect to a Wi-Fi network.
1 On the Settings screen, tap Connections Wi-Fi, and tap the switch to activate it. 2 Select a network from the Wi-Fi network list under Available networks.
Networks that require a password appear with a lock icon.
3 Tap Connect.
If you cannot connect to a Wi-Fi network properly, restart your Watch’s Wi-Fi feature or the wireless router.
NFC
You can use this feature to make payments and buy tickets for transportation or events after downloading the required apps. On the Settings screen, tap Connections NFC.
The Watch contains a built-in NFC antenna. Handle the Watch carefully to avoid damaging the NFC antenna.
Making payments with the NFC feature Before you can use the NFC feature to make payments, you must register for the mobile payment service. To register or get more information about the service, contact your service provider. 1 On the Settings screen, tap Connections NFC and tap the switch to activate it.
96

Apps and features
2 Touch the NFC antenna area of the Watch to the NFC card reader.
To set the default app, on the Settings screen, tap Connections NFC Payment and select an app.
The payment services list may not include all available payment apps.
NFC antenna
Disconnection alerts
Set to vibrate or make an alarm when the Bluetooth connection with your smartphone is disconnected while you are wearing your Watch. On the Settings screen, tap Connections Disconnection alerts and select an alert option you want.
Flight mode
This disables all wireless functions on your Watch. You can use only non- network services. On the Settings screen, tap Connections and tap the Flight mode switch to activate it.
Follow the regulations provided by the airline and the instructions of aircraft personnel. In cases where it is allowed to use the device, always use it in flight mode.
97

Apps and features
Mobile networks (SM-R905F, SM-R915F, SM-R925F)
Customise the settings to control mobile networks. On the Settings screen, tap Connections Mobile networks and select a mobile network connection option.
· Auto: Set to automatically use the Watch’s mobile network when the Bluetooth connection with your smartphone is disconnected. · When the Watch is connected to the smartphone via Bluetooth, the Watch’s mobile network is turned off to save battery power. Then, you cannot receive messages and calls made to the Watch’s number. · When the Bluetooth connection with your smartphone is disconnected, the Watch’s mobile network will automatically connect. Then, you can receive messages and calls made to the Watch’s number.
· Always on: Set to always use the Watch’s mobile network regardless of the connection with the smartphone.
· Always off: Set not to use the Watch’s mobile network. · Mobile plans: Subscribe to the service provider’s mobile plan or additional services.
· Some services that require a network connection may not be available depending on the service provider.
· When you are not subscribed to the service provider’s mobile plan, the Watch’s mobile network is turned off to save battery power and the network services may not be available.
Data usage (SM-R905F, SM-R915F, SM-R925F)
Keep track of your data usage amount and customise the limit settings. Set the Watch to automatically disable the mobile data connection when you have reached your specified mobile data limit. On the Settings screen, tap Connections Data usage.
· Start billing cycle on: Set the monthly start date of your plan’s data usage. · Set data limit: Activate or deactivate the feature to automatically disable the mobile data
connection when you have reached your specified mobile data limit. · Data limit: Set the mobile data limit.
98

Apps and features
Notifications
Change the notification settings. On the Settings screen, tap Notifications.
· Show phone notifications on watch: Set the conditions for sending smartphone notifications to your Watch while you are wearing it.
· Mute notifications on phone: Set to mute the smartphone when it receives notifications that will also be sent to your Watch while you are wearing it.
· Do not disturb: Set the Watch to mute all notifications, including incoming call notifications, and not to turn on the screen when receiving notifications or incoming calls.
· Advanced settings: Configure advanced settings for notifications. · Wireless emergency alerts: Change the emergency alert settings.
Some features may not be available depending on the region, service provider, or model.
Sounds and vibration
Change the sound and vibration settings. On the Settings screen, tap Sounds and vibration.
· Sound mode: Set to use sound mode, silent mode, or vibrate mode. · Vibrate with sound: Set the Watch to vibrate with sound. · Vibration: Set the vibration duration and intensity. · Call vibration: Select a vibration pattern for incoming calls. · Notification vibration: Select a vibration pattern for notifications. · Volume: Adjust the volume level. · Ringtone: Change the ringtone. · Notification sound: Change the notification sound. · System vibration: Enable vibrations for certain actions. · System sounds: Enable sounds for certain actions.
Some features may not be available depending on the region, service provider, or model.
99

Apps and features
Display
Change the screen settings. On the Settings screen, tap Display.
· Brightness: Adjust the brightness for the screen. · Auto brightness: Set the Watch to automatically adjust the brightness depending on the
ambient light conditions. · Always On Display: Set the Watch screen and some apps’ screens to always stay on while
wearing your Watch. However, the battery will drain more quickly than normal while using this feature. · Screen wake-up: Select how to turn the screen on. Refer to Turning the screen on for more information. · Show media controls: Set to automatically launch the Media Controller app on your Watch when music or video is played on the connected smartphone. · Screen timeout: Set the length of time the Watch waits before turning off the screen’s backlight. · Show last app: Set the time to keep the last-used app on after the screen is turned off. If you turn the screen on again within the time you set after it has been turned off, the app screen you last used will appear instead of the Watch screen. · Font: Set the font style for the screen. · Touch sensitivity: Set the Watch to allow use of the touchscreen with gloves on. · Show charging info: Set the Watch to display the charging information when the screen is off while charging.
Samsung Health
You can set the various setting options related to exercise and fitness. On the Settings screen, tap Samsung Health.
· Measurement: Set how to measure your heart rate and stress, and turn the additional features that can be measured during sleep on or off.
· Auto detect workouts: Set the auto detect workouts feature and select the exercise types to be detected.
· Inactive time: Set the time and days for receiving alerts after 50 minutes of inactivity. · Share data with devices and services: Set to share information with other connected
health platform apps, exercise machines, and TVs.
100

Apps and features
Advanced features
Activate the advanced features. On the Settings screen, tap Advanced features.
· Water lock: Activate water lock mode before entering the water. The touchscreen feature will be deactivated.
· Sleep mode: Activate sleep mode to reduce eye strain before sleeping and prevent your sleep from being disturbed.
· Theatre mode: Activate theatre mode to focus on watching movies. · Customise keys: Select an app or feature to launch when you press the Home key twice
or press and hold it. You can also select a feature to launch when you press the Back key. · Gestures: Activate the gestures feature and configure the settings. Refer to Gestures for
more information.
Gestures
Activate the gestures feature and configure the settings. On the Settings screen, tap Advanced features and select the feature you want under Gestures.
· Answer calls: Set to answer calls by shaking the arm which is wearing the Watch twice while bending at the elbow.
· Dismiss alerts and calls: Set to dismiss alerts and decline calls by rotating the wrist you are wearing your Watch on twice.
· Quick launch: Set to launch the selected feature quickly by moving the wrist you are wearing your Watch on up and down twice within five seconds after turning on the screen while closing your fist. Tap Select an option and set the feature to be launched quickly.
Battery
Check the remaining battery. If the battery is low, activate power saving mode to reduce battery consumption. On the Settings screen, tap Battery.
· Power saving: Activate power saving mode in which some features are restricted to reduce battery consumption.
101

Apps and features
· Watch only: Only the watch displays on the screen and all other features will be deactivated to reduce the battery consumption. Press the Home key to view the watch. To deactivate watch only mode, press and hold the Home key for more than three seconds. Alternatively, place the Watch on the wireless charger. The usage time left shows the time remaining before the battery power runs out. Usage time left may vary depending on your Watch settings and operating conditions.
Apps
Configure the settings for the Watch’s app. On the Settings screen, tap Apps.
· Choose default apps: Choose default apps for similar features. · Health Platform: Set your profile to be used for managing your health data and set to
share information with other connected health platform apps, exercise machines, and TVs. · Permissions: View the permission list for all apps, including the system apps, and change their permission settings. · Samsung app updates: Check for updates for some preinstalled Samsung apps.
General
Customise your Watch’s general settings or reset the Watch. On the Settings screen, tap General.
· Touch bezel: Change the touch bezel settings. · Text-to-speech: Change the settings for text-to-speech features used when TalkBack is
activated, such as languages, speed, and more. · Input: Change the settings for the keyboard and set the quick responses feature. · Date and time: Set the date and time manually.
Disconnect your Watch from the smartphone to use this feature, since it is synced with the connected smartphone. · Orientation: Set the Watch to match the wrist you wear it on, whether it is the left or right, and the orientation of the Home key or Back key after wearing your Watch. · Connect to new phone: Connect the Watch to another new smartphone after performing a reset for all your personal information. · Reset: Delete all data on your Watch.
102

Apps and features
Accessibility
Configure various settings to improve accessibility to the Watch. On the Settings screen, tap Accessibility.
· Functions you’re using: Check the accessibility features you are using. This feature appears only when using the accessibility feature.
· TalkBack: Activate TalkBack, which provides voice feedback. To view help information to learn how to use this feature, tap Settings Tutorial and help.
· Visibility enhancements: Customise the settings to improve accessibility for visually impaired users.
· Hearing enhancements: Customise the settings to improve accessibility for users with hearing impairment.
· Interaction and dexterity: Customise the settings to improve accessibility for users who have reduced dexterity.
· Advanced settings: Manage other advanced functions. · Installed apps: View accessibility services installed on the Watch.
Security
Configure your Watch’s security settings. On the Settings screen, tap Security.
· Lock type: Change the screen lock method. Refer to Lock screen for more information.
Privacy
Change your privacy settings. On the Settings screen, tap Privacy.
· Permission manager: View the list of features and apps that have permission to use them. You can also edit the permission settings.
· Customisation Service: Set to get personalised service based on your interests and how you use your Watch.
103

Apps and features
Location
Change settings for location information usage. On the Settings screen, tap Location.
· Permissions: Set the permission of the feature to use location information. · Location services: View the location services your Watch is using.
Safety and emergency
Change the settings for emergency alerts. You can also set to request an SOS automatically or manually when you are in emergency situations. Refer to Sending an SOS for more information. On the Settings screen, tap Safety and emergency.
· SOS with Home key: Set to request an SOS by quickly pressing the Watch’s Home key several times in an emergency.
· Hard fall detection: Set to request an SOS automatically when you are hurt from a fall and your Watch recognises it.
· Wireless emergency alerts: Change settings for emergency features, such as wireless emergency alerts. Some features may not be available depending on the region, service provider, or model.
Accounts and backup
You can use various features of the Watch after registering your Samsung or Google account on your connected smartphone. On the Settings screen, tap Accounts and backup.
· Samsung account: Register the Samsung account on your connected smartphone or check the previously registered Samsung account.
· Google account: Check the Google account registered on your connected smartphone and copy it to your Watch.
104

Apps and features
Google
Change the settings for Google. On the Settings screen, tap Google.
· Accounts: Check the Google account registered on your connected smartphone and copy it to your Watch.
Software update
Update your Watch’s software via the firmware over-the-air (FOTA) service. You can also change the update settings. On the Settings screen, tap Software update.
· Download and install: Check for and install updates manually. · Auto install: Set the Watch to install updates automatically overnight, while it is being
charged and has more than 30% of remaining battery power.
Tips and tutorials
Learn the basic tips for using your Watch and view the user manual on the connected smartphone. On the Settings screen, tap Tips and tutorials.
· Tutorial: View the tutorial for learning the Watch’s basic usage tips. · View tips on phone: View the detailed usage tips for your Watch on the connected
smartphone.
About watch
View the Watch’s additional information. On the Settings screen, tap About watch.
· Storage: Check the status of the used and available storage. · Status info: View the information, such as the Wi-Fi MAC address, Bluetooth address, and
serial number. · Legal info: View legal information related to the Watch. You can also send the Watch’s
diagnostic information to Samsung. · Software info: View the software version and security status. · Battery info: View the battery information.
105

Galaxy Wearable app
Introduction
To connect your Watch to a smartphone, you must install the Galaxy Wearable app on your smartphone. You can check the Watch’s remaining battery and configure the settings with the Galaxy Wearable app. Launch the Galaxy Wearable app on your smartphone. To search for settings by entering keywords, tap . You can also search for settings by selecting a tag under Suggestions.
Some features may not be available depending on the type of connected smartphone.
Watch’s remaining battery
Configure Watch settings and launch features you want.
Tap to use the following additional options: · Add new device: Disconnect your device from the currently connected smartphone and connect a new device. Follow the on-screen instructions to complete the connection. Refer to Connecting the Watch to a smartphone via Bluetooth for more information. · Auto switch: The Watch will still automatically connect to your smartphone if you wear it on your wrist. This feature will be displayed only when more than two devices that support the auto switch feature are paired to your smartphone.
106

Galaxy Wearable app
· Manage devices: Manage connected devices when more than two devices are paired with your smartphone. To disconnect a device from your smartphone, select a device and tap Remove.
· Contact us: Samsung Members offers support services to customers, such as device problem diagnosis, and lets users submit questions and error reports. You can also share information with others in the Galaxy users’ community or view the latest news and tips. Samsung Members can help you solve any problems you might encounter while using your device.
· About Galaxy Wearable: View version information of the Galaxy Wearable app and change the auto update settings. Some features may not be available depending on the region, service provider, or model.
Watch faces
You can change the type of watch to be displayed on the Watch screen. On the Galaxy Wearable screen of the smartphone, tap Watch faces. Select a watch face you want and tap Customise to change screen colours or components, such as clock hands and dials, and even select items to display on the Watch screen.
Making My style watch faces
Change your watch face into a pattern image that uses a colour combination abstracted from the picture you took. You can match your Watch’s watch face with any fashion you want.
This feature is only available on Samsung or Android smartphones.
1 On the Galaxy Wearable screen of the smartphone, tap Watch faces. 2 Select My style under Graphical. 3 Tap Customise Background Camera.
To select a picture saved on your smartphone, tap Gallery.
4 Tap to take a picture and then tap OK. 5 Drag the picture to the collection of colours you want to use.
107

Galaxy Wearable app
6 Select a pattern type and tap Done. 7 Tap Save.
The watch face will be changed into the My style one.
Making AR emoji watch faces
Change your watch face into your own AR emoji. This feature is only available on Samsung smartphones that support the AR emoji features.
1 On the Galaxy Wearable screen of the smartphone, tap Watch faces. 2 Select AR Emoji under Graphical. 3 Tap Customise Character. 4 Tap and follow the on- screen instructions to make your AR emoji. 5 Select the added AR emoji under Other emojis to transfer it to your Watch. 6 Tap Save.
The watch face will be changed into the AR emoji one.
Apps screen
Rearrange apps on the Apps screen. On the Galaxy Wearable screen of the smartphone, tap Apps screen. To rearrange apps, tap and hold an app to move, drag it to the desired position, and then tap Save.
108

Galaxy Wearable app

Tiles
Customise the tiles on the Watch. You can also rearrange tiles. On the Galaxy Wearable screen of the smartphone, tap Tiles.

Adding or removing tiles
Tap of the tile to add under Add tiles or tap tap Save.

on the tiles you want to delete, and then

Rearranging tiles
Tap and hold a tile you want to move, drag it to the desired position, and then tap Save.

Quick panel
Select the quick settings icons displayed on the quick panel of your Watch. You can also rearrange quick settings icons. On the Galaxy Wearable screen of the smartphone, tap Quick panel.

Adding or removing quick setting icons
Tap on the icon to add under Available buttons or tap tap Save.

on the icon to delete, and then

Rearranging quick setting icons
Tap and hold an icon to move, drag it to the desired position, and then tap Save.

109

Galaxy Wearable app
Watch settings
Introduction
View your Watch’s status and customise your Watch settings. On the Galaxy Wearable screen of the smartphone, tap Watch settings.
Samsung account
Register the Samsung account on your connected smartphone or check the previously registered Samsung account. On the Galaxy Wearable screen of the smartphone, tap Watch settings Samsung account.
Notifications
Change the notification settings. On the Galaxy Wearable screen of the smartphone, tap Watch settings Notifications.
· Show phone notifications on watch: Set the conditions for sending smartphone notifications to your Watch while you are wearing it.
· Mute notifications on phone: Set to mute the smartphone when it receives notifications that will also be sent to your Watch while you are wearing it.
· Most recent on phone or watch: View the apps that received recent notifications and change the notification settings. To customise notification settings for more apps, tap More All and select an app from the apps list.
· Sync Do not disturb with phone: Set to sync the do not disturb settings of your Watch and smartphone.
· Advanced notification settings: Configure advanced settings for notifications.
Sounds and vibration
Change the sound and vibration settings. On the Galaxy Wearable screen of the smartphone, tap Watch settings Sounds and vibration. Refer to Sounds and vibration in Apps and features for more information.
110

Galaxy Wearable app
Display
Change the screen settings. On the Galaxy Wearable screen of the smartphone, tap Watch settings Display. Refer to Display in Apps and features for more information.
Samsung Health
You can set the various setting options related to exercise and fitness. On the Galaxy Wearable screen of the smartphone, tap Watch settings Samsung Health. Refer to Samsung Health in Apps and features for more information.
Advanced features
Activate the advanced features. On the Galaxy Wearable screen of the smartphone, tap Watch settings Advanced features. Refer to Advanced features in Apps and features for more information about other features besides those listed below.
· Remote connection: Set the Watch to remotely connect to your smartphone with the mobile network or Wi-Fi network when a Bluetooth connection between devices is unavailable.
Battery
Check the remaining battery. If the battery is low, activate power saving mode to reduce battery consumption. On the Galaxy Wearable screen of the smartphone, tap Watch settings Battery. Refer to Battery in Apps and features for more information.
Apps
Manage the Watch’s apps and change their settings. On the Galaxy Wearable screen of the smartphone, tap Watch settings Apps.
· App settings: Change the detailed settings for some Watch’s app. · Your apps: Manage the Watch’s apps and view each app’s usage information, or uninstall
or disable unnecessary apps.
111

Galaxy Wearable app
Manage content
Transfer saved audio or image files from your smartphone to your Watch manually or automatically and delete audio or image files saved on your Watch on the smartphone. On the Galaxy Wearable screen of the smartphone, tap Watch settings Manage content.
· Music ­ Add tracks: Select audio files and manually send them from the smartphone to the Watch. ­ Delete tracks: Delete audio files saved on your Watch. ­ Auto sync: Set the smartphone to automatically sync recently added audio files with the Watch when it has more than 15 % of remaining battery power, when its storage is more than

References

• Samsung US | Mobile | TV | Home Electronics | Home Appliances | Samsung US
• Bixby | Apps & Services | Samsung US
• SAMSUNG
• Why Switch to Galaxy | Samsung US
• Wearing the Galaxy Watch/Fit | Samsung Support Australia
• Environment | Samsung UK

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>