ZETTI Airship High Performance Wingfoot User Guide

: June 16, 2024
: ZETTI

Table of Contents

ZETTI Airship High Performance Wingfoot User Guide
Welcome to the Zetti Team!
RECOMMENDATIONS (Airship)
INCLUDED COMPONENTS
SPECS
INSTRUCTIONS
Inflation

ZETTI Airship High Performance Wingfoot User Guide

Welcome to the Zetti Team!

We want to ensure you get the most of our incredible products so please read the directions carefully. If you have any specific concerns or questions please reach out to our customer support.

Website: zettibrand.com
Email: hello@zettibrand.com
Facebook: facebook.com/thezettibrand/
Instagram: @zettibrand

Also be sure to share your awesome experiences with our products! Tag us on your favorite social platforms or simply email us directly with any of your favorite images, videos, and stories.

RECOMMENDATIONS (Airship)

Do not expose to direct sunlight
Place in shaded area while not in use
Do not store at high pressure for extended period of time
If kept inflated we recommend less than 10 psi in a cool dry location
Use correctly sized screws for mounting hydrofoil
If screw is too long it may damage or puncture the PVC bottom of board
Screw should not protrude from foil base further than 5mm
Please reach out to customer support with any questions regarding compatibility

INCLUDED COMPONENTS

Board with Carbon plate (standard US box)
Travel Bag
High pressure pump
Pump adapters for sup and Kite
M8 T-nuts and M8x25mm screws
Repair Kit
Tighten Strap for board storage

SPECS

LENGTH (ft / cm)	WIDTH (in/cm)	THICKNESS (in/cm)	VOLUME (L)
5’3″ / 160	27.25″ / 69	4.7″ / 12	110
5’6″ / 168	29″ / 74	4.7″ / 12	120

INSTRUCTIONS

Inflation

Footstraps

Airship boards come equipped with footstraps and inserts on the board to support wingfoil and kitefoil progression. We recommend the boards be used without footstraps, especially when learning, however some users prefer them to help with their development. While the footstraps can be used for jumping, we can not explicitly recommend using the footstraps for that purpose. Therefore, any damage incurred from excessive or large airs will void the warranty.

*The Airship boards are shipped with the EVA foam over the inserts. The foam above the inserts is pressed but not removed. To insert the screws you should be able to screw directly into the recessed portion of EVA. If you have issues, a knife or small metal edge can be used to carefully trim the EVA over the screw inserts
**Please do this responsibly and reach out to Zetti support if you do not feel comfortable performing this on your own.

Hydrofoil Attachment: Zetti Coast to Airship

ASSEMBLY NOTES:

Zetti Airship uses industry standard 9cm track, and is compatible with most brands on the market. Please ensure the mast plate screw lengths and T-nut threads are the correct size. Failure to do so can cause damage to the board upon installation.
*Note: Some hydrofoils do not have slots and must be attached by these following steps – beginning after step 3 on the previous page:

Carefully place the mast base over the T-nuts
Insert M8 screw through the hole on the mast base and then screw into the t-nut
Repeat for all 4 screws
Move foil base into desired location
Tighten screws

Packing up

SAFETY AND RELEASE OF LIABILITY

Zetti hydrofoil boards are used in sports that are considered inherently dangerous. Any use of Zetti Brand products releases Zetti Brand, LLC from liability from damage or injury caused by improper use, pre-existing damage, extreme wear and tear, or adverse weather conditions. Please follow directions and safety recommendations carefully!
Inflate board to recommended pressure of 15-20 psi and be sure to check that the valve is in proper working order. Make sure the valve is closed properly before use.
Do not go further from shore than you are willing to swim back. If the board deflates there is no extra flotation compartment.
Use included board leash at all times. It is very easy to become separated from your board without a leash. Under extreme circumstances it may be necessary to disconnect from your board to prevent injury, for example, in large breaking swell. Please do so carefully, and have a plan to return to shore before release.

It is recommended to always wear a wetsuit, helmet, and Personal Flotation Device (PFD) or lifejacket while using our products. Please follow local laws and practice in safe locations away from marine traffic.
Minors must have adult supervision at all times while using the product.

WARRANTY

Please review the package upon receipt and inspect for damage or manufacturing defects prior to first use.
If defects are found please reach out to Zetti support immediately and we will work out a warranty replacement. This warranty replacement does not apply if the product was purchased with prior knowledge of defect or is due to materials added or mishandling of product.
We will happily accept returns within 30 days from the date of delivery if the product is in an unused and undamaged condition.
All of our products are guaranteed for 90 days from the date of delivery from manufacturing defects.

Limitations of Warranty

We manufacture our products with the highest quality of components and control. While we take care to make sure the highest quality product is shipped to our customers we cannot cover all damage incurred to the Product, and must exclude:

Normal wear and tear
Damage caused by overpressure
Impacts, scratches, or damage caused by foreign objects
Damage caused by collisions
Overexposure to UV, sun, salt, heat, or humidity
Improper storage
Damage caused by waves, shorebreak, or extreme weather
Damage caused by non-approved repair; professional or otherwise
Damage caused by unintended use of the Product; ie: rafting or towing behind boat
Damage caused by improper mounting outside of recommendations
Damage or personal injury to the user while using the Product
Damage or personal injury caused by the user to others when using the Product

Warranty is only valid if product is used for its intended purpose; Wingfoil, Surfoil, Supfoil, Wakefoil, or Kitefoil in leisure and does not cover products used for hire or in competition.

Note:

During a crash the board may flip upside down exposing the hydrofoil. As the board rolls back, the hydrofoil may contact the user or puncture the wing canopy or bladder. Do your best to prevent high speed or extreme crashes that can result in these conditions. This is a common occurrence during foiling and is not covered by warranty.