nvent HOFFMAN LC02 Floor Standing Enclosures Combinable Compact Version Instruction Manual

event HOFFMAN LC02 Floor Standing Enclosures Combinable Compact Version

Product Information

Specifications:

• Product Name : Floor Standing Enclosures
• Versions: Combinable and compact

Product Usage Instructions

Mounting Instructions :

To mount the floor-standing enclosure, follow the steps below:

1. Identify the different components of the enclosure, including the rear panel, side panel, roof plate, mounting plate, door, and bottom plate.
2. Choose the appropriate version of the enclosure based on your requirements: MCS, MCD, MKS, or MKD.
3. Ensure that you have the necessary equipment and tools for mounting, including screws and a torque wrench.
4. If mounting on or over a combustible surface, install a floor plate of at least 1.43 mm galvanized or 1.6 mm uncoated steel extended at least 150 mm beyond the equipment on all sides.
5. For customized enclosures, use devices with the same environmental ratings to close openings and maintain environmental integrity.

MCS Version :

To mount the MCS version of the floor standing enclosure, follow the steps below:

1. Attach the rear panel to the side panel using the provided screws.
2. Mount the roof plate onto the assembled rear and side panels.
3. Attach the mounting plate to the bottom of the enclosure.
4. Install the door onto the front of the enclosure.

MCD Version :

To mount the MCD version of the floor standing enclosure, follow the steps below:

1. Attach the rear panel to the side panel using the provided screws.
2. Mount the roof plate onto the assembled rear and side panels.
3. Attach the mounting plate to the bottom of the enclosure.
4. Install the doors onto the front and back of the enclosure.

MKS Version:

To mount the MKS version of the floor standing enclosure, follow the steps below:

1. Attach the rear panel to the side panel using the provided screws.
2. Mount the roof plate onto the assembled rear and side panels.
3. Attach the mounting plate to the bottom of the enclosure.
4. Install the door onto the front of the enclosure.

MKD Version:

To mount the MKD version of the floor standing enclosure, follow the steps below:

1. Attach the rear panel to the side panel using the provided screws.
2. Mount the roof plate onto the assembled rear and side panels.
3. Attach the mounting plate to the bottom of the enclosure.
4. Install the doors onto the front and back of the enclosure.

 FAQ

Q: Do I need to install a floor plate when mounting on a combustible surface?

A: Yes, when mounting on or over a combustible surface, a floor plate of at least 1.43 mm galvanized or 1.6 mm uncoated steel extended at least 150 mm beyond the equipment on all sides must be installed.

Q: How do I maintain the environmental integrity of a customized enclosure?

A: To maintain the environmental integrity of the enclosure, devices with the same environmental ratings shall be used to close openings in the customized enclosure.

PARTS

WARNING: When mounting on or over a combustible surface, a floor plate of at least 1.43 mm galvanized or 1.6 mm uncoated steel extended at least 150 mm beyond the equipment on all sides must be installed.

WARNING : In order to maintain the environmental integrity of the enclosure, devices with the same environmental ratings shall be used to close openings in customized enclosure

INSTALLATION INSTRUCTIONS

MCS

MCD

MKS

MKD

COMBINABLE ENCLOSURE

COMBINABLE ENCLOSURE

MOUNTING THE LIFT HANDLE

NOTE: transparent covers are ordered separately

MOUNTING LSEL

1. Used on enclosures 800mm deep and above.
2. Torque value for first tightening. For following tightening, torque value recommended is 4-5 Nm

MCS BACK PANEL

MKS BACK PANEL

MKD BACK PANELS

BOTTOM PLATE

• Used only on 1200mm wide enclosures.

MOUNTING PLATE

MOUNTING PLATE 1600 WIDE

MPD02

SPM

CCM 04

• Note : All four brackets must be installed at all four corners!
• The fixation holes can be used to better fix the bracket to the frame, using cage * nuts and screws !

MPF

DHN 180

DHN 180 DOOR ADJUSTMENT

CNM

MCM Mousepad RH into LH

Documents / Resources

| nvent HOFFMAN LC02 Floor Standing Enclosures Combinable Compact Version [pdf] Instruction Manual
LC02 Floor Standing Enclosures Combinable Compact Version, LC02, Floor Standing Enclosures Combinable Compact Version, Standing Enclosures Combinable Compact Version, Combinable Compact Version, Compact Version
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>