UGDLUCK UGO-A3 Magsafe Car Mount Charger User Manual
- June 16, 2024
- UGDLUCK
Table of Contents
UGDLUCK UGO-A3 Magsafe Car Mount Charger
PACKAGE CONTENT
ASSEMBLY
- Insert it into the air outlet and tighten it
INSTRUCTION
How to make it work well?
- Use the original cable to connect the power supply before use.
- Please use a QC 3.0 car charger for fast charging. (NOT INCLUDED)
- Please rotate it to adjust the air vent clip to grip the air vent blade firmly.
Installation Instructions
Please wait for 24 hours before installing the car mount.
Parameter Specification
- Input: DC12V/1.5A,9V/1.67A/5V/2A
- Output: 15W/10W/7.5W/5W
- Product standard: Qi
- Charging distance: <4MM
- Product Size: 676737.5mm
- Material: ABS+Mag
(Fast charging mode requires QC3.0 or 18W and above adapter)
Indicating status and protection functions
- Standby mode: LED light is always on. Press the touch area to switch.
- RGB mixed color, red, orange, yellow Green, green, blue, and purple 7 colors.
- Long press the touch area to turn the light on/off.
- Charging mode: LED will be off, remove the receiver and enter standby mode.
- FOD Automated Foreign Body Detection: Intelligent recognition of foreign bodies, such as hard objects, keys, and other metal, pop holders, or magnetic objects.
- All-round protection: temperature, short circuit, over-voltage, and over-current.
Indication of product parts
Attention
- Do not squeeze or collide heavily.
- Do not disassemble or put into fire by yourself when the power is on, in water, to avoid short circuit leakage.
- Do not use in severe high temperature, humidity, or corrosive environments to avoid damaging the circuit Leakage occurred
- Do not charge magnetic cards (ID cards, bank cards, etc.) with magnetic strips or chips On the board, to avoid magnetic card failure.
- Do not place metal (metal objects such as coins) on the charging plate while charging, as this will prevent Cause heat damage Please use the QC 3.0 adapter for fast charging.
(NOT INCLUDED)
Note: This product applies to all QI standard mobile phones with wireless
charging functions. Other mobile phones need additional receivers.
NOTE &REMOVE
Don’t install the mount on curved or dirty surfaces.
- Please don’t stick the 3M adhesive pad on a very soft, rugged, texture, greasy surface weather surface.
- Make sure the desired surface is clean and dry.
- The 3M Vho adhesive pad is for one-time use.
- Wait for 24 hours to make it more stable after installing it.
FQA
- Why not charge /slow charging /intermittent charging?
- Only works for iPhone 12 series and above.
- Please use the QC3.0 adapter (NOT INCLUDED).
- Just work for MagSafe Case or no phone case.
- Please use the provided USB cable.
- Why is the mobile phone easy to fall off?
- To ensure your phone is aligned right. When placing the phone, shake it left and right to ensure that your iPhone’s magnet is aligned with the inner magnet of the wireless charger. If it is not aligned, the phone will fall off.
NOTE
- Not compatible with non-magnetic cases, such as metal cases and accessories such as magnets, cards, keys, and pop-up grips will interfere with charging.
- Check and remove foreign objects on the back of the phone.
- It is not recommended to use in extreme environments.
- Please follow the instructions to install the suction cup base correctly.
- Close the running app on the phone to reduce power consumption
- With over-temperature protection, the product may stop working if the temperature exceeds 50°C.
- Do not expose it to direct sunlight for a long time as high temperature will weaken the suction cup.
FCC STATEMENT
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
WARRANTY
WARRANTY CARD
- Customer Service Email: [email protected]
- Dear Customers,
- Thank you very much for choosing us!
- As a responsible seller, we will try our best to provide the best products and services to you.
- Please feel free to contact us if you have any problems or suggestions with our products.
- We will provide you with free return and exchange services.
- [email protected].
Read User Manual Online (PDF format)
Loading......