Yorkville YXL10P Series Amp Powered Loudspeaker Enclosures Owner’s Manual

: June 16, 2024
: Yorkville

Yorkville YXL10P Series Amp Powered Loudspeaker Enclosures

Product Information

The YXL Series Bi-Amp Powered Loudspeaker Enclosures are high-quality speakers designed to deliver exceptional sound performance. Available in three models – YXL10P, YXL12P, and YXL15P – these loudspeakers are perfect for various applications, including live performances, DJ setups, and sound reinforcement in venues.

Specifications

Model: YXL10P
Power Output: 500W RMS
Frequency Response: 50Hz – 20kHz
Dimensions: 12″ x 10″ x 15″
Weight: 25 lbs
Model: YXL12P
Power Output: 600W RMS
Frequency Response: 45Hz – 20kHz
Dimensions: 14″ x 12″ x 18″
Weight: 30 lbs
Model: YXL15P
Power Output: 700W RMS
Frequency Response: 40Hz – 20kHz
Dimensions: 16″ x 14″ x 20″
Weight: 35 lbs

Product Usage Instructions

Important Safety Instructions
Please read and follow these safety instructions to ensure the proper and safe use of your YXL Series loudspeaker enclosures:

The lightning flash with the arrowhead symbol indicates the presence of dangerous voltage. Do not open the enclosure, as it may risk electric shock.
Do not vertically stack the loudspeaker enclosures.
Keep the loudspeakers away from excessive heat sources such as direct sunlight or fire.
Do not push or pull the loudspeakers excessively.
Read the Owner’s Manual before operating the loudspeakers and save it for future reference.
Clean the loudspeakers with a dry cloth only.
Keep the original packaging materials in case the unit needs to be returned for service.
Avoid exposing the loudspeakers to rain, moisture, or water. Do not use them near water.

Power Connection
When connecting your YXL Series loudspeaker enclosures to a power source, follow these guidelines:

Ensure that the voltage matches the specifications mentioned in the Owner’s Manual or marked on the unit.
If a mains plug or an appliance coupler is used as the disconnect device, make sure it remains easily accessible for operation.

Mounting and Safety
For safe installation and usage of your YXL Series loudspeaker enclosures, consider the following:

Do not place the loudspeakers on an unstable cart, stand, tripod, bracket, or table. Always use the recommended accessories provided by the manufacturer.
Follow the manufacturer’s instructions when installing the loudspeakers and use mounting accessories specified by them.
If the loudspeakers are suspended overhead, use a secondary safeguard like safety eyebolts and galvanized steel wire to prevent personal injury in case the primary mounting mechanism fails.

Headphone Use
Prolonged use of headphones at a high volume may cause damage to your ears. Please use headphones responsibly and at a safe volume level.

Water Exposure
Do not expose the loudspeakers to dripping or splashing water. Additionally, avoid placing objects filled with liquids on the loudspeakers.

FAQ (Frequently Asked Questions)

Q: Can I vertically stack the YXL Series loudspeakers?
A: No, the loudspeakers should not be vertically stacked due to their design and safety considerations.
Q: Can I use the YXL Series loudspeakers outdoors?
A: No, these loudspeakers are designed for indoor use only. Exposing them to rain, moisture, or extreme weather conditions can cause damage and pose safety risks.
Q: What should I do if I need to return the unit for service?
A: Keep the original packaging and materials in case you need to return the unit for service. Contact our customer support for further instructions.

IMPORTANT SAFETY INSTRUCTIONS IMPORTANT

This lightning flash with an arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The DO NOT STACK symbol is intended to alert the user that the product shall not be vertically stacked because of the nature of the product.

CAUTION

FOLLOW ALL INSTRUCTIONS
Instructions pertaining to a risk of fire, electric shock, or injury to a person

CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS DEVICE IS FOR INDOOR USE ONLY!

INSTALLED BATTERY PACKS SHALL NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS SUNSHINE, FIRE OR THE LIKE.

Read Instructions: The Owner’s Manual should be read and understood before the operation of your unit. Please, save these instructions for future reference and heed all warnings.
Cleaning: Clean only with dry cloth.
Packaging: Keep the box and packaging materials, in case the unit needs to be returned for service.
Warning: To reduce the risk or fire or electric shock, do not expose this apparatus to rain or moisture. Do not use this apparatus near water!

Warning:
When using electric products, basic precautions should always be followed, including the following:

Power Sources

Your unit should be connected to a power source only of the voltage specified in the owners manual or as marked on the unit. This unit has a polarized plug. Do not use with an extension cord or receptacle unless the plug can be fully inserted. Precautions should be taken so that the grounding scheme on the unit is not defeated. An apparatus with CLASS I construction shall be connected to a Mains socket outlet with a protective earthing connection. Where the
MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Hazards

Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious personal injury and serious damage to the product. Use only with cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. Only use attachments/accessories specified by the manufacturer.
Equipment that is suspended overhead must use a secondary safeguard to prevent personal injury in the event the primary mounting mechanism fails. Safety eyebolts attached to the equipment and galvanized steel wire can be used together to implement a failsafe mounting thus ensuring the safety of the equipment and anyone positioned below the equipment.
Improper installation can result in bodily injury or death. If you are not qualified to attempt the installation get help from a professional structural rigger.
Note: Prolonged use of headphones at a high volume may cause health damage to your ears.
The apparatus should not be exposed to dripping or splashing water; no objects filled with liquids should be placed on the apparatus.
Terminals marked with the “lightning bolt” are hazardous live; the external wiring connected to these terminals requires installation by an instructed person or the use of ready-made leads or cords.
Ensure that proper ventilation is provided around the appliance. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
No naked flame sources, such as lighted candles, should be placed on the apparatus.

Power Cord
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet. The AC supply cord should be routed so that it is unlikely that it will be damaged. Protect the power cord from being walked on or pinched particularly at plugs. If the AC supply cord is damaged DO NOT OPERATE THE UNIT. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle. The mains plug of the power supply cord shall remain readily operable.

Unplug this apparatus during lightning storms or when unused for long periods.

Service
The unit should be serviced only by qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, requires battery pack replacement or has been dropped. Disconnect power before servicing!

The Lightning Flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to person

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prongs are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING:

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.
To completely disconnect this apparatus from the ac mains, disconnect the power supply cord plug from the ac receptacle.
The mains plug of the power supply cord or appliance coupler shall remain readily accessible.

CAUTION
TO PREVENT ELECTRIC SHOCK HAZARDS, DO NOT CONNECT TO THE MAINS POWER SUPPLY WHILE THE GRILLE IS REMOVED.

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

This device may not cause interference,
This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

YXL Series Active Speakers

The YXL Series offers our best ratio of power, performance, and value for full-range active loudspeaker enclosures. Providing 500 watts (1000 watts peak) with efficient speaker components, the YXL Series is extremely loud for its size. There are several different input options for connecting audio sources including Bluetooth®, microphones, musical instruments, and other audio sources. While the onboard audio mixer may has a minimum of controls, it’s tremendously useful and provides great versatility. The YXL Series can be easily used in any situation, close to walls, or floors, in arrays with multiple enclosures, and as a stage monitor. With all these options, the YXL Series is the solution for all of your audio applications.

Up to 16 YXL Series Powered speakers can be linked together with a maximum of three ‘mixers’ active at any one time. This means up to 6 mic sources and 6 instrument/line sources are available in an array of three or more enclosures. The Master level controls are used to adjust the levels of individual powered enclosures. This is invaluable in applications where large numbers of enclosures are used such as in clusters or in trade show applications (or when YXL Series powered speakers are used as repeater enclosures or side-fill).

NOTE:
Our Link system allows additional powered YXL Series powered speakers to be driven from a single source (up to a maximum of 16 YXL Series powered enclosures). A maximum of 3 mixers can be used when Linking YXL Series powered enclosures

USER TIP:
When a pair of YXL Series powered speakers are Linked you can use both mixers integrated on each cabinet.

A 100 Hz high pass filter can be activated to make it easier to add subwoofers to the YXL-Series powered enclosures. This allows the speakers to be used more efficiently with almost any active subwoofer.

Features

1000 watts (peak) 500 watts (program)
Superior DSP processing with component protection
10, 12, or 15-inch woofers with 2-inch voice coils
1-inch HF compression drivers
90° x 40° HF dispersion Horns
Dual-purpose full range and wedge monitor speaker
Ultra-clear reproduction throughout the whole audio bandwidth
Lightweight and high-efficiency bi-amped power module
Low distortion and high power-handling 10, 12, and 15-inch woofers
Recessed control panel
Master Level control with Activity indicator (cabinet level adjustment)
3 Performance modes, Concert, Club, and Monitor
Defeatable 3-channel mixer with level controls and Clip indicators
Bluetooth® input/streaming, not affected by Mixer Defeat
2 Microphone Inputs with level control and phantom power
1/4-inch TRS Instrument and Line Inputs
1/8-inch Aux Input for connecting mono or stereo audio sources
An XLR Main In and Link output for easy connection and looping
Selectable Sub filter (HPF) for connecting a subwoofer
ABS/Polypropylene cabinet construction
Tough, full-length metal grille

Operating Instruction

Power Switch & Mode LED
The AC power switch on the rear panel turns the power On or Off. The Mode LED turns on to indicate power is supplied to the unit.

Mode Switch
The Mode Selector applies specific EQ and tone settings for the YXL Series powered enclosure, effectively custom tailoring the speaker for any environment.

Concert: Allows instruments and vocals to be equally and naturally reproduced which is best for live performance.
Club: Boosted bass and enhanced highs make this mode ideal for music playback.
Monitor: Optimized for use as a stage monitor and the human voice while minimizing feedback.

$Yorkville-YXL10P-Series-Amp-Powered-Loudspeaker-Enclosures-fig- $2$$

Master Control
The Master control sets the level of ALL sound coming out of the YXL Series enclosure. If there are multiple YXL Series speakers in a system, the volume of each speaker is individually set by using each enclosure’s Master control.

Activity LED

This LED illuminates when audio signal is present from all sources being sent to the Master.
NOTE: If the Master is turned to Min, the Activity LED will not illuminate.

Bluetooth®
The Yorkville YXL Series is capable of receiving streaming audio over Bluetooth® from devices such as smartphones, tablets, and laptops. Pairing your device with the YXL Series is simple and gives you the freedom to play your music wirelessly.

Bluetooth® Pairing
To pair your Bluetooth® device, depress the Bluetooth® switch for approximately 4 seconds. The blue LED will flash to indicate the YXL speaker is ready to be paired.

Linking Cabinets Using Bluetooth®.
Bluetooth® can be used along with the Link feature only when the first cabinet in the Link chain is paired and the mixer is enabled. Pair with the first cabinet using Bluetooth® and leave the others un-paired. Then, use the appropriate XLR cables to Link between the multiple cabinets by wire through the Link/left channel connection. If Stereo Bluetooth® is desired, set the “paired” cabinet to Stereo Mode, the right channel will play on the paired cabinet and the Left signal will play on the cabinet connected to the L/Link jack.

Onboard Mixer and Enable Switch
The Mixer Enable switch turns the onboard mixer ‘on’ or ‘off.’ When the Mic or Line inputs are used, this switch must be set to the ‘on’ position. If these inputs are not being used, the mixer should be turned ‘off,’ this will help prevent the mixer from contributing noise to the system. The onboard mixer should not be used when a source other than another YXL Series powered speaker (or similar) is connected to the LINK jack. Remember, a maximum of 3 mixers, in a chain of enclosures, should be used! A much larger number of enclosures may be used with the mixers disabled on the additional enclosures.

Mixer

Channel Level Controls & Clip LEDs
The channel level controls adjust the input sensitivity and the level of the channel’s signal being sent to the Master. The clip LEDs illuminate 3 dB before clipping and are affected by both the source’s gain signals and each corresponding channel level control.
- USER TIP: When using the mixer, the Master control should be adjusted to control the suitable overall level of the YXL Series Powered Enclosure for the application.
- NOTE: Adjustments of the gain for the Bluetooth® source can be made on the source device.
Channel 1 Mic/Instrument In
Any standard dynamic, condenser or phantom-powered microphone may be connected to the Mic input, and phan-tom power is built-in. The 1/4-inch TRS Instrument input is optimized for instruments such as guitars, basses or keyboards. Do NOT use both XLR and 1/4-inch inputs simultaneously.
- NOTE: Some condenser microphones, that don’t use batteries, may require phantom power.
- TECH NOTE: The function of the fixed 90 Hz high pass filter on Channel 1 is to minimize low-frequency rumble when an acoustic instrument is used. It also helps remove the boominess when using the Microphone.
Channel 2 Mic / Line In
Any standard dynamic, condenser or phantom-powered microphone may be connected to the Mic input, phantom power is built-in. The 1/4-inch TRS input can be used with any line source such as a CD player or an electronic instrument with a line output. It is always recommended to use balanced sources. This helps prevent the risk of hum or buzz associated with unbalanced connections, especially if the cable is long or the source is operated from a separate AC power connection. Do NOT use both XLR and 1/4-inch inputs simultaneously.
Channel 3 Stereo Aux In
The 1/8-inch Line input jack is a typical ‘stereo’ audio input that properly sums the left and right signals from stereo sources such as MP3 players. When the mixer is set in Stereo Mode the right output will appear at the Link Output allowing a pair of linked YXL cabinets to give you stereo playback.
- NOTE: Channel 3’s 1/8-inch TRS Line input and Bluetooth® can be used simultaneously.

Sub Switch

For operation with a subwoofer, the Sub switch shuts off the low-frequency boost and filters out signals below 100 Hz. This switch only affects the signals to the internal amplifier and does not affect signals going out from the on-board mixer, or to signals passing through the Link connections.

Main In

The Main In and L/Link connectors allow additional powered enclosures to be driven from a single source. You can Link up to 16 YXL Series powered enclosures! The Main In jack is the correct input to use when driving the YXL Series Powered Speaker with an external mixer or from another YXL link output.

TECH NOTE: The Main In and L/Link jacks operate at line level (+4 dBu) to achieve full power. When operating from signals that are not as strong, use the Line inputs of the first cabinet in the chain. The Link jacks are high quality balanced inputs with very good common mode (hum) rejection. To ensure maximum hum rejection, the proper balanced cables must be used.
NOTE: A maximum of 3 YXL Series Control Panel mixers can be used when Linking YXL Series Powered Enclosures.

Stereo/Mono Switch

The Stereo/Mono Switch works in conjunction with the L/Link out jacks. If a single YXL Series Powered Enclosure is used as the signal source, the originating cabinet will either be mono or Right channel only de-pending on the switch position. When in the out position (R), the Left channel is routed to the output of the link. When the switch is selected, the output of the Link is Mono (stereo signals summed). This allows a pair of “Linked” YXL cabinets to give you stereo playback. Mono sources will still play normally through both cabinets.

Specifications

YXL10P / YXL12P / YXL15P

System Type Active Loudspeaker
Active or Passive Active
Program Power (watts) 500 watts program (1000 watts peak)
Max SPL (dB) 126dB continuous
Frequency Response (Hz +/- 3dB) 43 – 16k (Hz +/-3dB)
HF Dispersion (°H x °V) 90° x 40°
Crossover Frequency (Hz) 1.6kHz
HF Impedance (ohms) 8
HF Horn Part of baffle
LF Driver(s)
- YXL10P 10-inch (2-inch voice coil)
- YXL12P 12-inch (2.3-inch voice coil)
- YXL15P 15-inch (2.5-inch voice coil)
LF Power Amplifier (watts) 450 watts program (900 watts peak)
LF Impedance (ohms) 4
HF Power Amplifier (watts) 50
HF Amplifier Type Class A/B
LF Amplifier Type Class D
Cooling Scheme Speed-controlled fan
Power Cable Yes
Power Switch Yes – back
Power Consumption (typ/max) 120/180
Mixer Controls 3 recessed dial controls
Level Controls Channels 1-3 and Master
EQ Controls Pushbutton select, Concert, Club, Monitor
Limiter Multiband excursion, RMS, rail
Other Controls / Features 2 Mic Inputs. Instrument In, Line In, 3.5mm Aux in, Bluetooth streaming, Sub In/Out, Mixer In/Out, Stereo/Mono Out
Feet Rubber
Bar Handles 1 x Side / 1 x Back
Pole Mount Adapter (1 3/8-inch/3.5cm) 1 Bottom (dual angle 1 3/8-inch/3.5cm) 90° and -5°
Flying Hardware 2 (top), 1 (pullback)
Enclosure Materials Polypropylene Cabinet, ABS baffle metal grille
Grille Powder Coated Steel with Grille Cloth
Other Details Rubber feet on the bottom and side with the monitor Wedge
Dimensions (DWH xbackW, inches) YXL10P 11×13.25×20.5; YXL12P 13.5x14x23; YXL15P (TBD)
Dimensions (DWH xbackW, cm) YXL10P 28×33.5×52; YXL12P 34×35.5x 58.5; YXL15P (TBD)
Weight (lbs/kg) YXL10P 31/14; YXL12P 37/16.8; YXL15P (TBD)

Specifications are subject to change without notice.

How To Use

$Yorkville-YXL10P-Series-Amp-Powered-Loudspeaker-Enclosures-fig- $3$$ $Yorkville-YXL10P- Series-Amp-Powered-Loudspeaker-Enclosures-fig- $4$$ $Yorkville-YXL10P-Series-Amp-Powered-Loudspeaker- Enclosures-fig- $5$$ $Yorkville-YXL10P-Series-Amp-Powered-Loudspeaker-Enclosures-fig- $6$$

DESCRIPTION

Many of the popular models in the Yorkville speaker cabinet line are now equipped with flying hardware for overhead suspension applications. Depending on the model, two or more internal braces have been provided for rigging purposes. Each brace contains two bolt holes and provides center-of-gravity fly-points for use with in-line or angular loads. Many of the models will support additional suspended cabinets according to their specified working load limits.

IMPORTANT!!
THE RIGGING OF LOUDSPEAKER SYSTEMS IS AN EXTREMELY SERIOUS MATTER. OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, INCLUDING (BUT NOT LIMITED TO) CALCULATING WORKING LOAD LIMITS, HARDWARE INSTALLATION, AND PERIODIC SAFETY INSPECTION OF ALL HARDWARE AND CABINETRY. IF YOU LACK THESE QUALIFICATIONS, DO NOT ATTEMPT THE INSTALLATION YOURSELF, BUT INSTEAD USE A PROFESSIONAL STRUCTURAL RIGGER. IMPROPER INSTALLATION CAN RESULT IN BODILY INJURY OR DEATH. CONSULT A STRUCTURAL ENGINEER TO CALCULATE ADDED LOADS FOR A BUILDING. STRUCTURAL REINFORCEMENT MAY BE NECESSARY TO ENSURE A SAFE INSTALLATION.

EYEBOLT INSTALLATION

REQUIRED TOOLS

4.5mm (7/32”) Hex Wrench
Thread lock adhesive (Removable Type)

EYEBOLT INSTALLATION

Using a 4.5mm (7/32”) hex wrench, remove the flat head bolts from the top or bottom of the speaker enclosure to expose the tapped holes (on TX models, the flat head bolts are located within the track rails), as shown below. Be sure to keep these handy as they will be needed to seal the cabinet after the eyebolts are removed.
IMPORTANT!!
USE ONLY LOAD-RATED FORGED EYEBOLTS. THESE MAY BE PURCHASED THROUGH YORKVILLE SOUND OR ATM FLY-WARE™. TO ENSURE CABINET-BRACING STRENGTH, MAKE SURE ALL FLY- POINTS ARE SECURED WITH EITHER AN EYEBOLT OR FLATHEAD HEX BOLT.
Place a drop of thread-lock adhesive on the threads of the eyebolt and insert one into the exposed hole. Tighten each eyebolt by hand until it fits snugly against the cabinet. Further, tighten each eyebolt by rotating it another half turn. Be sure to insert eyebolts in the threaded hole directly in line with the suspension cable. Always follow the eyebolt manufacturer installation and use instructions.
Suspend each cabinet according to working load calculations and practices recommended by the rigging hardware manufacturer.

IMPORTANT!!
ON MODELS WITH ONLY TWO TOP SUSPENSION POINTS THE SUPPLIED PULLBACK AT THE REAR OF THE BOTTOM CENTER PANEL OF THE CABINET IS NOT TO BE USED AS A SUSPENSION POINT. THIS POINT TO BE USED FOR PULL-BACK PURPOSES ONLY.

$Yorkville-YXL10P-Series-Amp-Powered-Loudspeaker-Enclosures-fig- $7$$

WORKING LOAD LIMITS

Specified working load limits have been determined for the enclosure as follows:

YXL10P	3 top		M8	weight of cabinet only
YXL12P	2 top, 1 pullback		M8	weight of cabinet only
YXL15P	2 top, 1 pullback		M8	weight of cabinet only

IMPORTANT!! READ ALL ENCLOSED INSTRUCTIONS ABOUT THE PROPER USE OF HARDWARE. TO ENSURE PROPER INSTALLATION, FOR TECHNICAL INFORMATION ON SUSPENSION TECHNIQUES AND EXTERIOR ACCESSORY INFORMATION WE SUGGEST CALLING ATM FLY-WARES TECHNICAL SERVICES IN THE UNITED STATES AT (310)639-8282 MONDAY THROUGH FRIDAY FROM 9 AM TO 6 PM (PST) OR FAXING AT (310)639-8284. YORKVILLE SOUND MAKES NO CLAIMS AS TO THE SAFETY OF THE ENCLOSURES IF RECOMMENDED LOAD LIMITS AND HARDWARE ARE NOT STRICTLY ADHERED TO. NOR DOES IT MAKE ANY SAFETY CLAIMS TO THE RESULTANT INSTALLATION.
IMPORTANT!! TRACK RAILINGS: UNITS THAT INCORPORATE THE TRACK RAILING SYSTEM HAVE THE SAME WORKING LOAD LIMITS AS THEY DO WHEN THEY ARE USED WITH EYEBOLTS. THESE RATINGS MAY BE LIMITED AND BASED ON THE RATINGS OF THE TRACK FITTINGS THEMSELVES. PLEASE ENSURE THAT THE RATING OF THE CERTIFIED TRACK FITTINGS EXCEEDS THE NECESSARY WORKING LOAD LIMITS.

WIRING

Block Diagram for YXL10P+YXL12P+YXL15P
DESIGNED BY YORKVILLE SOUND

$Yorkville-YXL10P-Series-Amp-Powered-Loudspeaker-Enclosures-fig- $8$$

Two & Ten Year Warranty

Unlimited Warranty
Yorkville’s two and ten-year unlimited warranty on this product is transferable and does not require registration with Yorkville Sound or your dealer. If this product should fail for any reason within two years of the original purchase date (ten years for the wooden enclosure), simply return it to your Yorkville dealer with original proof of purchase and it will be repaired free of charge. This includes all Yorkville products, except for the YSM Series studio monitors, Coliseum Mini Series, and TX Series Loudspeakers.

Freight charges, consequential damages, weather damage, damage as a result of improper installation, and damages due to exposure to extreme humidity, accidents, or natural disasters are excluded under the terms of this warranty. The warranty does not cover consumables such as vacuum tubes or par bulbs. See your Yorkville dealer for more details. Warranty valid only in Canada and the United States.

WORLD HEADQUARTERS

CANADA