MP Monport 40W Laser Engraver Controller User Guide
- June 4, 2024
- monport
Table of Contents
MP Monport 40W Laser Engraver Controller
OVERVIEW
This GRBL controller is developed for Monport 40w CO2 laser engraver & cutter and other 40w machines which can engrave and cut glass, leather, plastic, wood, etc. Its firmware and ports can also be used to control similar engravers from other manufacturers and some CNC machines. It can be taken as the replacement of Nano controller.
PRODUCT IMAGES
TECHNICAL SPECIFICATIONS
Model | 40w laser engraver&cutter |
---|---|
CPU Type | MEGA328P/ Arduino |
Board Dimensions
| 3.3″x5.9″x0.9″ (8.5cmx15cmx2.35cm)
Input Power| 24V
Output Power| 5V / 12V / 24V
Support Axis| X, Y1, Y2, Z
Firmware| GRBL
Max. USB Speed| Mini USB 2.0
Compatible Software| Lightburn / LaserGRBL
Support Operating Systems| Windows / MacOS / Linux
PRODUCT DIAGRAM
No. | Label | Pins | Use |
---|---|---|---|
1 | DC | — | DC 12-48V power Supply |
2 | — | — | USB-C |
3 | Reset | 2 | Reset |
4 | Probe | 2 | Z axis height automatic detection |
5 | Run | 2 | Continue the process |
6 | Holo | 2 | Process the process |
7 | X+ | 3 | X Axis Limit Switch |
8 | X- | 3 | X Axis Limit Switch |
9 | Y+ | 3 | Y Axis Limit Switch |
10 | Y- | 3 | Y Axis Limit Switch |
11 | Z+ | 3 | Z Axis Limit Switch |
12 | Z- | 3 | Z Axis Limit Switch |
13 | Offline plug | 8 | Offline control |
14 | DC 24V | 2 | DC output/input 24v |
15 | PWM/5V | 3 | 5V Output Signals |
16 | PWM/12V | 3 | 12V Output Signals |
17 | PWM | 2 | 5V Output Signals |
18 | 12V | 2 | 5V Temp. Controller Signal |
19 | 12V | 2 | 5V Temp. Controller Signal |
20 | Z/motor | 4 | Z Axis Driver Signal |
21 | Y2/motor | 4 | Y2 Axis Driver Signal |
22 | Y1/motor | 4 | Y1 Axis Driver Signal |
23 | X/motor | 4 | X Axis Driver Signal |
24 | SPN | 2 | Trouble-locating |
25 | DC 48V | 2 | DC output 48V |
26 | DC 24V | 2 | DC output 24V |
INSTALLATION
- Step 1: Remove the old control board from the engraver, and place the new controller where the old one is.
- Step 2: Connect power supply to the control board.
- Step 3: Connect the machine with PC via a USB cable.
SOFTWARE CONFIGURATION
-
Step 1: Check out whether the USB cable is connected to the PC.
-
Step 2: Open the Lightburn Software.
-
Step 3: Choose the device.
-
Step 4: Name whatever you like.
-
Step 5: Enjoy your new journey
CONTACT INFO
Thank you for choosing this controller to upgrade your 40w machine! Come and
join in the Monport community at our official laser group on Facebook or visit
the company forums at monportlaser.com! If you encounter any problem regarding
your engraver, do not hesitate to contact customer service with your order
number at help
support@monportlaser.com. Our teams will respond within 24 hours to make
things right. Thank you and we hope you will choose us again for all your
laser needs.