monport YX570 Cabinet Laser Engraver User Manual

June 17, 2024
monport

monport YX570 Cabinet Laser Engraver

Product Information

Specifications:

  • Model: YX57080w/100w
  • Class: Class 1 laser system

Introduction:
The Cabinet Laser Engraver is a versatile laser equipment designed for personal and professional use. It utilizes a CO laser system and is equipped with various safety features to ensure safe operation. Please read the following instructions carefully before using the engraver.

Symbol Guide:
The user manual uses the following symbols to indicate important information:

  • A triangle with an exclamation mark indicates a warning or caution.
  • A circle with a line through it indicates a prohibitedaction.
  • An arrow pointing to a specific part indicates a reference to that part.

Designated Use:
The Cabinet Laser Engraver is intended for engraving on various materials. It should be used in accordance with the instructions provided and in a responsible manner. The engraver is suitable for both personal and professional applications.

Main Components:

  • Cover:
    The cover provides access to the main bay for placing and retrieving materials. It also allows for laser path alignment and other maintenance tasks. When the cover is opened, power to the laser is automatically cut as a safety measure.

  • Viewing Window:
    The polycarbonate window is shielded to protect users from the laser and its reflection. It allows for monitoring of the engraving process. However, it is important not to continuously stare at the laser during operation, even through the window.

  • Left Access Door:
    This door provides access to the main bay for work on the mirrors and Y-axis rail.

  • Exhaust Fan:
    The exhaust fan pulls out gases and airborne debris from the worktable. It is designed to expel them through a vent connected to a window or air purifier.

  • Caster Wheels:
    The front wheels of the engraver include locks to hold it securely in place during operation.

  • Feet:
    The feet of the engraver can be rotated down to provide additional stability and anchor the machine in place.

  • Workbed:
    The workbed can be adjusted in height to accommodate materials of different thicknesses. It can also be adjusted between an aluminum platform and a honeycomb platform depending on the specific engraving requirements.

  • Laser Head:
    The laser head holds the 3rd mirror, focus lens, red dot guidance, and air assist outlet. It plays a crucial role in directing the laser beam and ensuring accurate engraving.

  • X-Axis Rail:
    The X-axis rail supports the movement of the laser head and houses the 2nd mirror and LED lighting. It enables precise positioning of the laser for optimal engraving results.

  • Laser Key:
    This key controls the power supply to the laser tube. It should be turned on after turning on the control system power and turned off before shutting down the engraver.

  • Control System Power:
    This button turns on the engraver’s control system, exhaust fan, LED lighting, and cabinet sockets. It should be turned on before the laser key and turned off after use.

  • Top Right Access Door:
    This door provides access to the underside of the control panel for troubleshooting and wiring repairs.

  • Connection Inputs:
    This panel includes the machine’s ports for USB, computer, and Ethernet connections. It allows for seamless connectivity with external devices.

  • Bottom Right Access Door:
    This door provides access to the mainboard, motor drivers, and power supplies. It allows for easy maintenance and repairs of these components.

Usage Instructions

Preparing the Engraver:

  1. Ensure that the engraver is placed on a stable and level surface.
  2. Connect the engraver to a reliable power source.
  3. Check all connections and ensure they are secure.
  4. Make sure the exhaust vent is properly connected to a window or air purifier.

Loading Materials:

  1. Open the cover of the engraver by lifting it gently.
  2. Place the material to be engraved on the workbed.
  3. Adjust the workbed height if necessary to accommodate the material thickness.
  4. Ensure that the material is properly aligned and secured in place.

Powering On:

  1. Turn on the control system power by pressing the designated button.
  2. Wait for the control system to initialize.
  3. Turn on the laser key to supply power to the laser tube.

Setting Parameters:

  1. Refer to the control panel or user interface to set the desired engraving parameters.
  2. Adjust the laser power, speed, and other relevant settings as per your requirements.

Initiating Engraving:

  1. Start the engraving process using the designated controls or software interface.
  2. Monitor the engraving progress through the viewing window, but avoid continuous staring at the laser.

Powering Off:

  1. Stop the engraving process by following the instructions provided in the control system or software.
  2. Turn off the laser key to cut off power supply to the laser tube.
  3. Turn off the control system power using the designated button.

FAQ:

Q: What should I do if I have questions or need support?
A: If you have any questions or require support, please contact our support department. They will address your concerns as soon as possible.

Read Carefully Before Use Keep for Future Reference

PREFACE

Thank you for choosing our laser equipment.

  • Your CO₂ laser engraving machine is intended for personal and professional use. When used in accordance with these instructions, it comprises a Class 1 laser system but some components remain EXTREMELY dangerous. Never disable the preinstalled safety devices and always use your laser safely and responsibly.
  • Read this manual carefully before operation. It covers the details of correct installation, adjustment, maintenance, and—most importantly—safe operation of your new laser. It is intended to be used in conjunction with your engraving software manual, as the software typically does not only provide image design but also serves as an alternative interface for the laser settings and machine controls. You and any other users of this device should thoroughly understand BOTH manuals before attempting to operate the laser.
  • Keep both manuals for future reference and provide them to ANYONE who will install, operate, maintain, or repair this machine. Both manuals should be included if this device is given or sold to a third party.
  • If you have any questions after reading these manuals, please contact us and our support department will address your concerns as soon as possible.

Introduction

General Information

  • This manual is the designated user guide for the installation, setup, safe operation, and maintenance of your cabinet laser engraver. It is divided into six chapters covering general information, safety instructions, installation steps, operation instructions, maintenance procedures, and contact information.
  • ALL personnel involved in the installation, setup, operation, maintenance, and repair of this machine should read and understand this manual, particularly its safety instructions. Some components are extremely high voltage and/or produce powerful laser radiation. Substandard performance and longevity, property damage, and personal injury may result from not knowing and following these instructions.
  • Your laser engraver works by emitting a powerful laser beam from a glass tube filled with excited carbon dioxide (CO₂), reflecting that beam off three mirrors and through a focus lens, and using this focused light to etch designs into certain substrates.
  • The first mirror is fixed near the end of the laser tube, the second mirror travels along the machine’s Y axis, and the third mirror is attached to the laser head that travels along the X-axis. Because some dust from the engraving process settles on the mirrors, they require frequent cleaning.
  • Because they move during operation, they also require periodic readjustment using their attached positioning screws to maintain the proper laser path. A water cooling system—typically a pump or chiller—must be used with this engraver to dissipate the heat produced by the laser tube. Similarly, an exhaust system—typically either an external vent or a dedicated air purifier—must be used to remove the dust and gases produced by the engraving process.
  • With low intensity use, the provided laser tube has an average lifespan around 12000 hours before requiring replacement. However, constantly running your laser above 70% of its maximum rated power can significantly shorten its service life. It is recommended to use settings from 10–70% of the maximum rated power to enjoy optimal performance and longevity.
  • Note that this is a high-voltage device and, as a safety precaution, it is recommended to only touch its components with one hand at a time during use.
  • Note that the active laser is invisible to the human eye. This device should never be used while any cover is open to avoid potentially permanent injury.
  • Note also that the water cooling system and exhaust system are both absolutely essential to the safe use of this device. Never operate the engraver without both of these systems operating properly. Water should always be kept clean and around room  temperature, and the exhaust system should always comply with all applicable laws and regulations for workplace and environmental air quality.

Symbol Guide
The following symbols are used on this machine’s labeling or in this manual:

  • These items present a risk of serious property damage or personal injury.
  • These items address similarly serious concerns with regard to the laser beam.
  • These items address similarly serious concerns with regard to electrical components. Protective eyewear should be worn by anyone around this machine during operation.
  • This product is sold in conformity with applicable EU regulations.
  • This product contains electrical components that should not be disposed of with regular garbage.

Designated Use

  • This machine is intended for use engraving signs and other consumer products on applicable substrates. This laser can process a wide variety of materials including wood and cork, paper and cardboard, most plastics, glass, cloth and leather, and stone. It can also be used with some specially coated metals. Use of this system for nondesignated purposes or materials is not permitted.
  • The system must be operated, maintained, and repaired by personnel familiar with the field of use and the dangers of the machine and the material being engraved including its reflectivity, conductivity, potential for creating harmful or combustible fumes, etc.
  • Laser beams are dangerous. The manufacturer and/or seller bear(s) no responsibility and assume(s) no liability for any improper use of this device or for any damage or injury arising from such use. The operator is obliged to use this cabinet laser engraver only in accordance with its designated use, the other instructions in its manuals, and all applicable local and national laws and regulations.

Technical Specifications

Components

Main Parts

  • A. Cover—The cover provides access to the main bay for placing and retrieving materials, as well as fixing the laser path alignment and other maintenance. Power to the laser is automatically cut when the cover is opened.
  • B. Viewing Window—The polycarbonate window is shielded to protect you and others from the laser and its reflec-tion, allowing monitoring of the engraving process. However, you should never stare continuously at the laser during operation, even through the window.
  • C. Left Access Door—This door provides access to the main bay for work on the mirrors and Y-axis rail.
  • D. Exhaust Fan—This fan pulls out gases and airborne debris from the worktable, sending it through your vent to a window or air purifier.
  • E. Caster Wheels—The front wheels include locks to hold the engraver in place.
  • F. Feet—These feet can be rotated down to help anchor the machine in place.
  • G. Workbed—The workbed can be adjusted in height to fit thinner and thicker materials, as well as adjusted between the aluminum and honeycomb platforms.
  • H. Laser Head—The laser head holds the 3rd mirror, the focus lens, the red dot guidance, and the air assist outlet.
  • I. X-Axis Rail—The X-axis rail holds the 2nd mirror and LED lighting. It also supports the movement of the laser head left and right across the workbed.
  • J. Y-Axis Rail—The Y-axis rail supports the movement of the X-axis rail up and down the workbed.
  • K. Side to Side Pass-Through—These allow larger pieces of material to be fed through the workbed. Additional care must be taken to avoid seeing or suffering exposure to the laser beam and its reflection.
  • L. Front & Back Pass-Through Doors—These doors open to allow larger pieces of material to be fed through the workbed. Addi-tional care must be taken to avoid seeing or suffering exposure to the laser beam and its reflection.
  • M. Front Access Door—This door provides access to the area below the workbed for easy cleanup.
  • N. Emergency Stop—This button immediately cuts all power to the laser tube in the event of an emergency.
  • O. Control Panel— The control panel offers hands-on control of the engraving process, including manual movement of the laser head and firing of the laser.
  • P. Laser Key—This key controls the power supply to your laser tube. Turn it on after the control system power and turn it off before.
  • Q. Control System Power—This button turns on your engraver’s control system, exhaust fan, LED lighting, and cabinet sockets. Turn it on before the laser key and turn it off after.
  • R. Top Right Access Door—This door provides access to the underside of the control panel for troubleshooting and wiring repairs.
  • S. Connection Inputs—This panel includes the machine’s ports for its USB, computer, and Ethernet connections.
  • T. Bottom Right Access Door—This door provides access to the mainboard, motor drivers, and power supplies. Its vents and cooling fan keep components from overheating during prolonged use and should not be obstructed.
  • U. Top Rear Access Door—This door opens to the laser bay, holding the laser tube and its connections.
  • V. Laser Tube—This long glass tube is filled with helium, nitrogen, and CO₂ gas and water cooled to safely produce your engraving laser. Its connection to the laser power supply is extremely high voltage and extremely dangerous.
  • W. Water Pump Power Socket—These sockets connect to your main power supply, ground the machine, and provide an additional socket for your water pump if needed. It is recommended, however, to use a separate plug on a different fuse for your water cooling system.
  • X. Power Supply Socket
  • Y. Bottom Rear Access Door—This door provides access to the air pump for easier maintenance.
  • Z. Water Ports—These ports connect to your water pump or chiller to keep your laser tube cool and stable.

Laser Path

  • A. Laser Tube This COz-filled glass tube is mounted on brackets and immobile. Its connection to the laser power supply is extremely high voltage and extremely dangerous.
  • B. 1st Mirror-This adjustable-angle mirror is fixed in place to transfer the engraving laser from the tube to the 2nd mirror.
  • C. 2nd Mirror-This adjustable-angle mirror moves with the X-axis rail to allow the laser beam to travel along the Y axis.
  • D. 3rd Mirror-This adjustable-angle mirror moves with the laser head to allow the laser beam to travel along the X axis.
  • E. Focus Lens-This lens directs and focuses the laser to the material.
  • F. Workbed-The bare workbed can be adjusted in height or fitted with aluminum or honeycomb tables for different projects.

Laser Head

  • A. X-Axis Rail-This rail moves along the Y axis, with its movement controlled by limit switches.
  • B. Air Assist-This device blows pressurized air to kill sparks and blow away gas and debris as you engrave.
  • C. 3rd Mirror-This adjustable-angle mirror transfers the laser from the 2nd mirror to the focus lens.
  • D. Red Dot Pointer-This device helps you see the exact position ofthe invisible engraving laser.
  • E. Focus Lens-This 18mm lens directs and focuses the laser beam to its point of contact with the engraving material.
  • F. Laser-The engraving laser itself is invisible but highly dangerous. Avoid any direct exposure to your skin or eyes.
  • G. Workbed-Use the provided acrylic tool to get the perfect focus for any thickness of material.

Connection Inputs

  • A. USB Port-This port allows you to load and save designs and parameters directly onto the engraver.
  • B. USB Line Port-This port connects to your control computer and its engraving software using any of its USB ports.
  • C. Ethernet Port-This port connects to your control computer and its software either directly or via the internet.

Bottom Right Access Door

  • A. Mainboard-This circuit board controls the engraving process, responding to commands from your engraving software or the machine’s control panel.
  • B. X-Axis Driver-This device moves the laser head along the X rail.
  • C. Y-Axis Driver-This device moves the X rail along the Y rail.
  • D. Control Power Supply-This device powers the machine’s control panel.
  • E. Alternating Current Contactor-This device controls the flow of electricity to a load by making and breaking electrical connections between the load and the power source.
  • F. Laser Power Supply-This device transforms standard electricity into the extremely high voltage charge necessary for the laser tube.

Laser Power Supply

  • A. High-Voltage Wire line is connected to the laser tube’s anode or positive end, providing high-voltage current to power the laser.
  • B. Mounting Holes standard slots allow simple installation and removal.
  • C. Digital Display-This display provides the real-time current to the laser tube in milliamps and notification of any problems with the laser or water systems.
  • D. Laser Indicator Light-This light shows when current is being sent to the laser tube.
  • E. Main Power Terminal-This terminal block holds the power supply’s connection to the engraver’s grounding (FG) and to the main power supply (AC).
  • F. Test Button-This button is used to attempt to test fire the laser when trouble- shooting problems. If the laser fires successfully, the problem will usually be with the control panel or its connections.
  • G. Connection Terminal-This terminal block holds the connections to the high (H) and low-level output (L), the water protection switch (P), another ground (G), and two laser signal controls (IN & 5V).
  • H. Water Indicator When connected, this light shows the water cooling system is operating.
  • I. Laser Signal Indicator Light-This light shows the laser tube is operating.
  • J. Ethernet Port-This port allows you to connect the laser power supply to an external ammeter.

Safety Information

Disclaimer
Your engraver may differ somewhat from those shown in this manual due to options, updates, etc. Please contact us if your engraving machine came with an outdated manual or if you have any other questions.

General Safety Instructions
Your device should come with instruction labels in the following locations:

If any of these labels is missing, illegible, or damaged, it must be replaced.

  • Use this laser engraving device only by all applicable local and national laws and regulations.
  • Use this device only by this instruction manual and the manual for the engraving software included with it. Only allow this device to be installed, operated, maintained, repaired, etc. by others who have also read and understood both manuals.
  • Ensure that this manual and the software manual are both included with this device if it is ever given or sold to a third party.
  • DO NOT operate continuously for more than 5½ hours. Stop for at least 30 minutes between uses.
  • DO NOT leave this device unattended during operation. Observe the device throughout operation and, if anything seems to be operating strangely, immediately cut off ALL power to the machine and contact either our customer service or your dedicated repair service. Similarly, ensure the device is FULLY turned off (including using the emergency stop switch) after each use.
  • DO NOT allow minors, untrained personnel, or personnel suffering from physical or mental impairment that would affect their ability to follow this manual and the software manual to install, operate, maintain, or repair this device.
  • Any untrained personnel who might be near the device while it is in operation MUST be informed that it is dangerous and fully instructed on how to avoid injury during its use.
  • Always keep a fire extinguisher, water hose, or other flame retardant system nearby in case of accidents. Ensure that the local fire department’s phone number is clearly displayed nearby. In the case of a fire, cut electrical power before dousing the flame.
  • Familiarize yourself with the correct range for your extinguisher before use. Take care not to use the extinguisher too close to the flame, as its high pressure can produce blowback.

Laser Safety Instructions
When used as instructed, this machine comprises a Class 1 laser system safe for users and bystanders. However the invisible engraving laser, the laser tube, and its electrical connections remain EXTREMELY dangerous. Used or modified without care, they can cause serious property damage and personal injury including but not limited to the following:

  • The laser will easily burn nearby combustible materials

  • Some working materials may produce radiation or harmful gases during processing

  • Direct exposure to the laser will cause bodily harm including serious burns and irreparable eye damage
    As such,

  • DO NOT modify or disable this device’s provided safety features. Do not modify or disassemble the laser and do not use the laser if it has been modified or disassembled by anyone except trained and skilled professionals. Dangerous radiation exposure and other injury may result from the use of adjusted, modified, or otherwise incompatible equipment.

  • NEVER leave any part of the cabinet open during operation except (when needed) the pass-through doors. Never interfere with the laser beam, do not place any part of your body in any part of the laser path during operation, and never attempt to view the laser directly. When using the pass-through doors or otherwise risking exposure to the laser beam, take measures to protect yourself from potentially reflected laser beams including the use of personal protective equipment such as protective eyewear specially designed to filter the specific wavelength of your engraver’s laser with an optical density (OD) of 5+.

  • DO NOT stare or allow others to stare continuously at the laser beam during operation even when the cover is closed and/or wearing protective eyewear. Exercise caution with the red dot positioning light as well, as its direct beam is a Class 2 laser in its own right.

  • ONLY use this engraver if its automatic shutoffs are working properly. When you first get this engraver and if you subsequently notice any problems, test them (see below) before undertaking any other work. Do not continue use if the shutoffs do not occur. Turn off the device and contact customer service or your repair service. Never disable these shutoffs.

  • DO NOT ever under ANY circumstances use this laser engraver if the water cooling system is not working properly. Always activate the water cooling system and visually confirm that water is flowing through the entire system before turning on the laser tube. If using the provided water pump, ensure that it is placed in a tank full of cool or tepid distilled water. Do not use ice water or water that has become hotter than 100°F (38°C). For best results, keep it between 60–70°F (15–21°C). Replace heated water or add sealed bottles of frozen water to cool it, while never allowing the system to run without water or allowing the water to become colder than 50°F (10°C). Immediately stop use if the water cooling system malfunctions.

  • DO NOT use generic coolant or antifreeze in your cooling water, as they may leave corrosive residues and solidify inside your hoses and piping, causing malfunctions and even explosions. Use custom laser-safe formulations or use and store your engraver in a climate-controlled area.

  • DO NOT leave potentially combustible, flammable, explosive, or corrosive materials nearby where they could be exposed to the direct or reflected laser beam.

  • DO NOT use or leave sensitive EMI equipment nearby. Ensure the area around the laser is free of strong electromagnetic interference during any use.

  • ONLY use this machine for working the materials described in the Material Safety section of this manual. The laser settings and engraving process must be properly adjusted for specific materials.

  • Ensure the area is kept free of other airborne pollutants, as these might pose a similar risk of reflection, combustion, etc.

Electrical Safety Instructions

  • ONLY use this device with a compatible and stable power supply with less than 5% fluctuation in its voltage.
  • DO NOT connect other devices to the same fuse, as the laser system will require its full amperage. Do not use standard extension cords or power strips. Use only surge protectors rated over 2000J.
  • ONLY turn on the power to this device when it is well grounded, either via a firm connection to a 3-prong outlet or via a dedicated grounding cable firmly connected to the proper slot on the cabinet. Do not use with an ungrounded 3 to 2 prong adapter. The device’s grounding should be checked regularly for any damage to the line or loose connections.
  • The area around this laser engraving device should be kept dry, well-ventilated, and environmentally controlled to keep the ambient temperature between 40–95°F (5–35°C). For best results, keep the temperature at 75°F (25°C) or below. The ambient humidity should not exceed 70%.
  • Do not handle the water pump or the water in which it is submerged while the pump is attached to its power supply. Place it in water before connecting it to power and disconnect it from power before removing it.
  • Adjustment, maintenance, and repair of the electrical components of this device must be done ONLY by trained and skilled professionals to avoid fires and other malfunctions, including potential radiation exposure from damage to the laser components. Because specialized techniques are required for testing the electrical components of this marking system, it is recommended such testing only be done by the manufacturer, seller, or repair service.
  • Unless otherwise specified, ONLY undertake adjustment, maintenance, and repair of the device when it is turned off, disconnected from its power supply, and fully cooled.

Material Safety Instructions

  • Users of this laser engraving machine are responsible for confirming that the materials to be processed can withstand the heat of the laser and will not produce any emissions or byproducts either harmful to people nearby or in violation of local or national laws or regulations. In particular, do not use this device to process polyvinyl chloride (PVC), Teflon, or other halogen-containing materials under any circumstances.
  • Users of this laser engraver are responsible for ensuring that every person present during operation has sufficient PPE to avoid injury from the emissions and byproducts of the materials being processed. In addition to the protective laser eyewear described above, this may require goggles, masks or respirators, gloves, and other protective outer clothing.
  • DO NOT ever under any circumstances use this laser engraver if the exhaust system is not working properly. Always ensure that the exhaust fan can remove the dust and gas produced by the engraving process by all applicable local and national laws and regulations. Immediately stop use if the exhaust fan or vent pipe malfunctions. Periodically check the air assist intake filter to ensure it stays free of any dust or debris.
  • Users must exercise special caution when working with conductive materials as the buildup of their dust and ambient particles may damage electrical components, cause short circuits, or produce other effects including reflected laser radiation.
  • This machine can be safely used with the following materials:

Plastics

  • Acrylonitrile Butadiene Styrene (ABS)
  • Nylon (Polyamide, PA, etc.)
  • Polyethylene (PE)
  • High-Density Polyethylene (HDPE, PEHD, etc.)
  • Biaxially-Oriented Polyethylene Terephthalate (BoPET, Mylar, Polyester, etc.)
  • Polyethylene Terephthalate Glycol (PETG, PET-G, etc.)
  • Polyimide (PI, Kapton, etc.)
  • Polymethyl Methacrylate (PMMA, Acrylic, Plexiglass, Lucite, etc.)
  • Polyoxymethylene (POM, Acetal, Delrin, etc.)
  • Polypropylene (PP, etc.)
  • Styrene

Other

  • Cardboard
  • Ceramics, including Dishes, Tile, etc.
  • Glass
  • Leather
  • Paper & Paperboard
  • Rubber
  • Stone, including Marble, Granite, etc.
  • Textiles, including Cotton, Suede, Felt, Hemp, etc.
  • Wood, including Cork, MDF, Plywood, Balsa, Birch, Cherry, Oak, Poplar, etc.

See §4.3 for the recommended parameters for the most commonly engraved materials.

This machine CANNOT be used with the following materials or with any materials which include them:

  • Artificial Leather containing Hexavalent Chromium (Cr[VI]), due to its toxic fumes
  • Astatine, due to its toxic fumes
  • Beryllium Oxide, due to its toxic fumes
  • Bromine, due to its toxic fumes
  • Chlorine, including Polyvinyl Butyral (PVB) and Polyvinyl Chloride (PVC, Vinyl, Cintra, etc.), due to its toxic fumes
  • Fluorine, including Polytetrafluoroethylenes (Teflon, PTFE, etc.), due to its toxic fumes
  • Iodine, due to its toxic fumes
  • Metals, due to their conductivity and reflectivity
  • Phenolic Resins, including various forms of Epoxy, due to their toxic fumes
  • Polycarbonate (PC, Lexan, etc.), due to its toxic fumes

For all other materials, if you are unsure about its safety or laserability with this device, seek out its material safety data sheet (MSDS). Pay especial attention to information about safety, toxicity, corrosiveness, reflectivity, and reaction(s) to high heat. Alternatively, contact our support department for further guidance.

Installation

Installation Overview

  • A complete working system consists of the laser engraving cabinet, its vent, a water tank with a pump, all applicable connection cables, and the laser and access keys. The cabinet can use designs provided by the enclosed engraving software by direct or internet connection with your computer; it can also engrave designs loaded directly from a flash drive. Users can configure other additional accessories (such as an industrial water chiller, fume extractor, or rotary axis) to suit their needs.
  • Use only the hardware, wiring, and power sources that came with or are compatible with this device. Installing equipment that your device is not designed to work with can lead to poor performance, shortened service time, increased maintenance costs, property damage, and personal injury.
  • Please note the specific requirements of your system’s installation. Every customer must understand these notes before installation to execute a proper setup and achieve safe laser performance. If you have any installation questions or problems, contact our technicians and customer support team.
  • Any auxiliary equipment must be adjusted to the base machine. Queries may be directed to the dealer or manufacturer of such equipment.

Location Selection

  • Before you install your engraver, select an appropriate location for its use.
  • Be sure that it meets all of the requirements discussed in the Safety Information above. The location should be stable, level, dry, and climate controlled to ensure an ambient temperature of 40–95°F (5–35°C) and an ambient humidity under 70%. In particular, the temperature and humidity together should not be close to the dew point. It is also advisable to use a windowless room or to use blinds and/or curtains to avoid exposure to the potential additional heat of direct sunlight. The location should be free of dust and other airborne pollutants and well ventilated enough to process any fumes produced by the engraving process in accordance with all applicable laws and regulations. Depending on the materials to be processed, this may require construction of a dedicated ventilation system. It should be away from children; combustible, flammable, explosive, or corrosive materials; and sensitive EMI devices. The power cord should be plugged into a compatible and stable power source via a grounded 3-prong outlet.
  • No other item should be drawing current from the same fuse. There should be firefighting equipment nearby and the local fire depart-ment’s phone number should be clearly displayed.
  • It is highly recommended to have an extra work table nearby in order to avoid placing objects on or directly adjacent to the machine, which could become a fire or laser hazard.

Unpacking Your Engraver

Your engraving machine arrives in a wooden crate with its accessories (including this manual) packaged beside it. You should have placed the crate in a spacious flat area for unpacking, ideally where you plan to operate the machine permanently.

  • Step 1. Take out the accessories pack from the wooden crate. Check that you have received all of the following: a power cord, a ground wire, USB and Ethernet cables, a USB flash drive with engraving software included, a water pump with its tank and piping, an exhaust pipe with a hose clamp, a set of hex wrenches, a tube of silicone sealant, an acrylic focusing tool, keys, and this manual.
  • Step 2. If you have not already done so, finish removing the crate from around your engraver. Each foot is attached to the base of the crate with a hex screw. Use a 7.8 mm hex wrench to remove them. Rotate the feet up, unlock the wheels, and roll the machine into place.
  • Step 3. Fix it in place by pressing down on the brake pads on the 2 front wheels and rotate the feet down to anchor them. If needed, suitable fasteners can also be used with the 0.2 inch (5 mm) holes to further secure your engraver.
  • Step 4. CAREFULLY remove the rest of the foam packaging material from around the laser tube, the viewing window, and the rest of the machine. The laser tube is a highly fragile object and should be handled delicately and as little as possible.
  • Step 5. Inside the main bay, remove the nylon cable ties from the X axis and the honeycomb table.
  • Step 6. You may keep the packaging in case of future return but, if you dispose of it or any accessories, be sure to do so in compliance with applicable waste disposal regulations.

Electrical Grounding

  • This device employs a powerful laser. As discussed in the Safety Information above, it is extremely high voltage and potentially dangerous, so users must securely ground it to avoid the buildup of static electricity. Using a standard 3-prong outlet will provide sufficient grounding. If you do not have access to a 3-prong outlet, you MUST use the grounding cable and ensure its proper connection. The far end of the cable should be securely connected to a single metal rod driven at least 8 feet (2.5 m) deep or to two separate metal rods driven at least 4 feet (1.2 m) deep into soil located at least 5 feet (1.5 m) from the machine. The resistance along the line should be no greater than 5Ω.
  • Poor grounding WILL cause equipment failure and create a serious electrical shock hazard. The manufacturer and/or seller bear(s) no responsibility and assume(s) no liability for any damage, accidents, or injuries caused by bad grounding connections.

Water Cooling Installation

  • The provided water pump is essential to your engraver’s performance and longevity. When this laser works without a properly maintained cooling system, its glass tube WILL explode from excess heat.
  • NEVER touch or adjust your engraver’s water supply while the pump is connected to power.
  • To install your pump, fill a dedicated tank with at least 2 gallons (7.5 L) of distilled water. Using deionized or tap water will gradually degrade the quality of your engraver and may even cause dangerous mineral buildup in the cooling system. NEVER use generic antifreeze for the same reason. Use custom laser-safe formulations or store your engraver in a climate-controlled area.
  • Connect the two hoses that came with your engraver to the water inlet and water outlet on the back of your engraver. Attach the other end of the inlet tube directly to your pump and completely submerge the pump in your water tank. Place the outlet tube into the tank in such a way that the returning water flows into the tank without splashing or other prob-lems.
  • Connect the water pump to its power supply. For best results, use a power outlet on a separate fuse from the engraver itself. If no such outlet is available, the pump can also be plugged into a dedicated socket located on the side of the engraving cabinet. Once the pump is plugged in, water should begin to run through your machine and back into your tank. ALWAYS obtain visual confirmation that the water is flowing through the laser tube before starting your laser.
  • NEVER allow the water in the tank to become too hot to cool the laser. Install a thermal alarm or periodically check the water’s temperature during prolonged use. If the water begins to reach 100°F (38°C), replace it with cooler water. Either replace it in stages or turn off the laser during this process: never allow the laser to operate without a constant flow of cooling water. It is also possible to add sealed bottles of frozen water to your tank to keep the water cool but never allow the water to become ice cold itself, as this could shatter the heated glass CO₂ tube as well.
  • As an alternative to manually adjusting the water in your tank, you may also use an industrial water chiller to supply temperature-controlled water to your machine. Follow its separate manual and again, for best results, plug it into a separate fuse from the engraver itself. Remember to connect the chiller’s outlet port with the engraver’s inlet port and to connect the chiller’s inlet with the engraver’s outlet.

Exhaust System

  • Install the provided exhaust pipe directly onto the fan. The pipe can be expanded to a full length of about 5 feet (1.5 m).
  • The other end should be connected to a dedicated purifier or (if the fumes are not hazardous and meet local and national air safety standards) placed out a window. NEVER operate the laser if the vent is not purifying or removing the fumes produced by the target material. Research materials before use and never operate the laser on any (such as PVC, teflon, and other halogen-containing substances) that can produce corrosive, hazardous, or even deadly fumes.

Main Power Connection

  • Confirm that the labeling beside the connection socket on the machine matches your power supply. Connect one end of the main cable to the connection socket and the other end to a grounded outlet. Under NO circumstances should you switch on the device if the voltages do not correspond.
  • Fluctuation along the line should be less than 5%. If this is exceeded, the fuses will blow. They are located in the connection socket and are accessible from the exterior. Similarly, do not connect this device to standard extension cords or power strips. Connect it directly to a grounded outlet or use a surge protector rated over 2000J.

Control Computer

See the software manual for details on the requirements for the control computer. The control computer can be connected using the provided USB cable (via the port marked “USB Cable to PC”), using the provided Ethernet cable (“Ethernet Cable”), or using the internet if the engraver has been connected to it using the Ethernet cable. If the control computer is directly connected to the engraver, it should not be placed more than 15 feet (4.5 m) away in order to avoid possible interference to the signal on its line. Familiarize yourself with the software’s image design features and laser control settings before using it to operate the laser.

Initial Testing Emergency Shutoff

Because of the risk of fire and other hazards during engraving, this engraver includes a large and easy-to-reach emergency stop button near the control panel. Press it down to stop the laser tube instantly.
When your engraver arrives, its e-stop is already pressed and must be pulled up to allow the laser to function. You should test that it works properly before conducting ANY other work with your machine. Start the water cooling system, place a piece of laserable scrap material on the workbed, close the cover, and press PULSE to fire the laser. Hit the emergency stop button and observe whether the laser stops instantly. If the laser continues to fire, the emergency stop is not working and must be replaced before the engraver can be used. Turn off the machine and contact customer service.

Cover Shutoff (Interlock)

  • Because of the risk of blindness, burns, and other injury from direct exposure to the invisible engraving beam, this device also shuts off the laser automatically when the protective cover is raised during operation.
  • After ensuring that the emergency stop button works, you should also test that the cover shutoff works properly before conducting any other work on your machine. Start the water cooling system, place a piece of laserable scrap material on the workbed, close the cover, and press PULSE to fire the laser. Release the button. Taking care not to expose yourself to seeing or being hit by any possible reflected laser light, open the cover as little as possible and attempt to fire the laser again. If the laser fires, the automatic shutoff is not working and must be repaired before the engraver can be used. Turn off the machine and contact customer service.

Water Shutoff

Because of the danger posed by an uncooled laser tube, this engraver also shuts off the laser automatically when the water cooling system malfunctions.
After ensuring that the emergency stop button and cover protection both work, you should also test that the water shutoff works properly before conducting any other work on your machine. Start the water cooling system, place a piece of laserable scrap material on the workbed, close the cover, and press PULSE to fire the laser. Release the button. Cut off the flow of water by crimping or tying the two hoses. (Take care not to damage the hoses themselves in this procedure.) Attempt to fire the laser again. If the laser fires, the automatic shutoff is not working and must be repaired before the engraver can be used. Turn off the machine and contact customer service. If the laser does not fire, the automatic shutoff is working fine; simply release the two hoses to begin circulating water again and continue setting up your engraver.

Laser Path Calibration

Although our factory calibrates your entire system during assembly, it is possible for the laser tube, the focus lens, and/or one or more of the mirrors to be jostled out of alignment during shipment. As such, it is recommended that you perform an optical alignment test as part of setting up your machine. See the Maintenance section below for step-by-step guidance.

Air Assist

Your air assist should arrive preinstalled and correctly wired. Simply check that it is correctly configured and connected as shown. If any tubing or wiring needs to be reconnected, shut off all power to the machine (including by pressing the emergency stop) before adjusting anything. Check that its air intake filter is in place, clean, and not obstructed by any nearby objects.

Security
For your own safety and that of passersby, this engraver can be locked shut using the provided key. It is recommended that you use it to lock the machine between sessions, preventing any unauthorized operation of the machine.

Operation

Operation Overview

Operate this laser marking machine only in accordance with all the instructions provided in this manual. Failure to follow the proper guidelines detailed here can result in property damage and personal injury.
This section will address only some of the options and features provided by the operation software. Before beginning to use the machine, make sure that you have read this entire manual (particularly the Safety Information above), the separate software manual, and any and all warnings provided on the machine itself.

General Operation Instructions

  • Step 1. Create your design that you’d like to engrave. You can do this directly in your engraving software or use any other graphics program, saving or converting the file to a format compatible with the engraver. See the full list of acceptable file types in the Technical Specifications section above.

  • Step 2. Check that your water tank is full of clean and cool but not cold distilled water. Replace the water if it is not clean or cool. Add more water if it is not completely covering the water pump. Turn on the water pump by plugging it in or (if it’s plugged into the cabinet directly) by pulling up the emergency stop button and pressing the control system button on the front of the machine. Visually confirm that the water is flowing through the whole system either by opening the top rear door to look at the laser tube itself or by observing that water is entering the machine and returning to the tank through the outlet tube. If the laser tube is examined directly, remember to close its access door before continuing. Add more distilled water if the pump is no longer well covered after filling the engraver’s water tubing.

  • Step 3. Turn on your fume extractor or ventilation system, if any. (The engraver’s own exhaust fan will turn on with the machine.)

  • Step 4. Pull up the emergency stop button and turn on the engraver’s control panel using its button on the front of the machine. Load your chosen design directly from a USB flash disk or through your computer’s connection with the engraver.

  • Step 5. Open the engraver’s cover, check that the air assist is working properly, and adjust the workbed if necessary.
    The honeycomb bed is recommended for most applications. The bed can be raised or lowered using the manual adjustment knob to accommodate different thicknesses of various materials. Alternatively, the honeycomb bed can be removed to expose the aluminum knife bed and provide a little more space for thicker projects. For heavier substrates, be careful to distribute the weight as evenly as possible across the reinforced aluminum supports.

  • Step 6. Place a sample piece of your material on the workbed. The standard location is in the top left corner of the workbed. This can be changed by moving either your design or the location of the engraver’s origin using either the control panel or your engraving software.
    To work on larger pieces of material, you may open the front or rear pass- through door or both together.
    DO NOT insert anything onto the workbed through the pass-through doors other than the material while the laser is active. Pay special attention to the fumes and dust that may be released through these doors. Be sure that your ventilation system is strong enough to pull in all of byproducts or wear the necessary PPE to ensure the health of users and passersby.

  • Step 7. Focus the laser by placing the acrylic focus tool on top of the material and carefully raising the workbed. The laser head should barely touch the top of the acrylic tool without applying any pressure, ensuring the engrav-ing distance is correct. (Again, never attempt to focus the laser either way without some material on the work-bed.) Close the cover.

  • Step 8. Customize your design’s contrast and engraving depth by adjusting the parameters in your engraving software or directly through the control panel. If your engraving instructions detail the power setting in milliamperes, use the following conversion chart to find the appropriate power setting:

    • The threshold for the lowest setting is 10%. The laser will not fire at any setting lower than this. It is NOT recommended to use the laser tube at full capacity, especially for extended periods. The recommended maximum power setting is 70%, as prolonged use above that amount will shorten your laser’s service life. To increase engraving depth, increase the amount of energy per unit area by increasing the laser’s power or the number of loops or by slowing down the speed parameter. Engraving too deep, however, reduces image quality, especially for coated materials.
    • When working with new materials, remember that you should always start on the low end of likely settings. If the effect is not yet strong enough, you can always rerun the design loop several times or rerun it with more powerful settings until you create the effect that you want.
    • Resolution should usually be set to 500 dots per inch. Reducing your image resolution can be helpful in some cases, reducing flaming and increasing the energy of the pulse in a way that improves the quality of the resultant image in some materials such as some plastics.
  • Step 9. Turn on the laser tube by inserting and turning your laser key. To reduce the risk of electric shock, once the laser tube is on, try to touch the engraver with only one hand at a time.

  • Step 10. Press START PAUSE to engrave your design. Again, do not stare continuously at the laser even through the protective polycarbonate window. Watch for possible issues like sparks or fires, however, and be prepared to quickly extinguish a fire if necessary.

  • Step 11. Once the laser has stopped, examine the quality of your first run and adjust the laser parameters on the control panel or in your software as necessary to create the desired effect.
    During repetitive engraving and cutting, periodically check your pump’s tank to maintain a water temperature below 100°F (38°C). If this temperature is reached, stop work and allow your engraver to cool before further use.

  • Step 12. When you have finished engraving, close your engraving software and then turn off your machine in the following order: laser power supply, control panel, any ventilation device, the water cooling system, and the emergency power button. Remove your laser key from the control panel.

  • Step 13. Fully clean the workbed, emptying any debris from the lower bay.

  • Step 14. For best results, lock and disconnect your laser engraver from its power supply between uses. Unplug it or turn off its intermediary surge protector.

Instructions for Specific Materials

The following instructions are suggestions to help speed safe work with a range of materials. The user should research the specific safety and engraving requirements of their specific material to avoid the risk of fire, hazardous dust, corrosive and poisonous fumes, and other potential problems. Once the product is known to be safe or appropriate protective equipment has been set up, it can be helpful to engrave a test matrix of small boxes produced at various speed and power settings to discover the ideal settings for your design. Alternatively, start with low power and fast speed settings and rerun your design as many times as needed, using progressively greater laser intensity.

Average Engraving Settings

Ceramics

When engraving on ceramics, generally use moderate to high power. Using more loops rather than higher power and lower speed can help avoid cracking the material during work. Be mindful of the health risk posed by dust generated from ceramic engraving, especially for repetitive industrial applications. Depending on the material and the amount of work, a fan or even full ventilation system may be required to address the problem. Similarly, operators and others in the work area may need to use breathing PPE such as masks and respirators.

Glass
When engraving glass, generally use high power and low speed. As with ceramics, it can be helpful to run more loops at lower settings to avoid cracks. Care must be taken when engraving fiberglass and carbon fiber to avoid combinations of settings that produce a laser intensity great enough to damage the structural integrity of its component fibers, producing blurry marking. PPE should be worn to avoid exposure of the eyes, nose, mouth, and skin to the dust produced by working with either material, especially for repetitive industrial applications. Clothing worn while working with fiberglass should be washed separately afterwards.

Leather
When engraving leather products, generally use low to moderate power at high speed. Natural leather should be engraved slightly slower and at slightly higher power than artificial leather. Be especially attentive to the possibility of fire, as well as the dust produced in repetitive applications.

Metal

CO₂ laser engravers should not be used for marking, engraving, or cutting metal. They are best suited for working coatings applied to a metal base, and care must be taken not to attempt work on the underlying metal itself. A variety of coatings specialized for CO₂ engraving are available, and the user should follow the instructions provided as the parameters vary from product to product and metal to metal. Generally, work on aluminum coatings should be done more quickly at lower power and work on steel coatings can be done more slowly at higher power.

Paper and Cardboard

When engraving various paper products, generally use low to moderate power and fast speed. Test samples from each batch, as only small parameter differences can separate effects that are too light from those that burn through the substrate. As with leather, be especially attentive of the possibility of fire, as well as the dust produced in repetitive applications.

Plastics

Plastics for engraving are available in many different colors and thicknesses and with many different coatings and surfaces. The majority of available plastics can be well engraved and cut with a laser. Plastics with a microporous surface seem to give the best result because less surface material needs to be removed. When engraving plastics, generally use low power and high-speed settings. Marking and engraving with too much power or at too low a speed can concentrate too much energy at the point of contact, causing the plastic to melt. Among other problems, this may produce poor engraving quality, noxious fumes, and even fires. High-resolution engraving can cause the same problem, so medium to low-resolution designs should be preferred for most plastics.

Rubber

The various compositions and densities of rubber cause slightly varying engraving depth. Testing various settings on sample pieces of your specific rubber is highly recommended for best results. When engraving rubber, generally use a consistent high-power setting and create your effects by varying the laser’s speed. Microporous rubber materials require a significantly higher speed than standard rubber. Engraving any kind of rubber produces a considerable amount of dust and gas. Depending on the amount of work, breathing PPE and/or a full ventilation system may be required to address the problem.

Stone
When engraving various kinds of stone, generally use moderate power and moderate to fast speed. As with ceramics and glass, be mindful of the dust created (especially for repetitive industrial applications) and take similar measures to ensure the safety of users and others in the work area.

Textiles
When engraving textiles like cloth and fleece, generally use low power and fast speed. As with leather, be especially attentive to the possibility of fire and dust.

Wood

  • As with rubber, there is a huge variety of woods, and testing your specific material is essential to get the best results. In general, wood with consistent grain and coloring engraves more evenly. Knotted wood produces uneven effects, while resinous wood produces greater edge contrast. Some softwoods like balsa, cork, and pine engrave well (albeit with low contrast) at low or moderate power settings and high speed. Others like fir suffer from uneven fibers that usually produce a poor effect no matter what you do.
  • Hardwoods like cherry and oak engrave well at high power settings and low speed. Manufactured wood products can vary from brand to brand, mostly based on its glue composition and abundance. MDF works well but creates dark edges when cut.
  • In addition to the risk of fire with any wood product, extra care must be taken with the fumes from the glue used in plywood and other manufactured woods. Some are too dangerous to work with at all, while others require careful ventilation and the use of breathing PPE for repetitive industrial applications. Wood toxicity should also be examined, as the dust from some natural woods including oleander and yew can also cause nausea and cardiac problems in high enough amounts.

Maintenance

Maintenance Overview

The use of procedures other than those specified herein may result in hazardous laser radiation exposure. Before any cleaning or maintenance work, always switch off the device and disconnect it from its power supply. Always keep the system clean, as flammable debris in the working and exhaust areas constitutes a fire hazard. ONLY allow trained and skilled professionals to modify or disassemble this device.

  • Clean and cool water must be provided to the system at all times.
  • The working table must be cleaned daily.
  • The 3rd mirror and the focus lens must be checked every day and cleaned if required.
  • The other mirrors, exhaust system, and air intake filter must be checked every week and cleaned if required.
  • The beam alignment should be checked weekly.
  • The wiring should be checked every week for loose connections, especially the wiring for the laser tube power supply.
  • The guide rails should be cleaned and lubricated at least twice a month.
  • The air assist must be checked every month and cleaned if required.
  • The whole laser machine including the other components such as the water cooling system must be checked every month and cleaned where required.

Water Cooling System

NEVER touch or adjust your engraver’s water supply while the pump is still connected to power.
The laser tube requires cool and clean distilled water to avoid overheating. Tepid water at room temperature or a little below is ideal. The laser tube requires at least 2 gallons (7.5 L) of cool and clean distilled water or other laser-safe coolant to avoid overheating. If the temperature of the water ever approaches 100°F (38°C), discontinue work until it has cooled or find a way to reduce its temperature without interrupting the supply of water to the laser tube. The water should never be allowed to become too cold either, which could also cause the glass laser tube to shatter during use. During winter or if ice is used to cool hot water, ensure the temperature never falls below 50°F (10°C).
More water should be added every few days to ensure evaporation does not cause the pump to become exposed during use.

Cleaning

  • Cleaning the Water System
  • NEVER touch or adjust your engraver’s water supply while the pump is still connected to power.
  • The water tank should be shielded from ambient dust created during work. If the water ever becomes visibly dirty, discontinue work. The debris in the water will reduce its cooling efficiency, can heat up itself, and can damage the cooling pipes. Change the water, place the water outlet tube into a separate bucket, and run the cooling system until all contaminated water has been flushed from the engraver. Clean the water tank itself before refilling it with clean and cool distilled water, replacing the outlet tube, and continuing operation.
  • If the water remains visibly clean at all times, it is still recommended that you clean the water tank about once a month as a precaution, changing the water as you do so.
  • If you use an industrial water chiller instead of the provided pump, follow its separate instructions for maintenance but similarly ensure that the water used remains cool, clean, and pure.

Cleaning the Main Bay and Engraver

Check at least once a day whether dust has accumulated in the main engraving bay. If so, it must be removed. The exact cleaning interval and requirements strongly depend on the material being processed and the operating time of the device. A clean machine guarantees optimal performance and reduces service costs, as well as reducing the risk of fire or injury.
Clean the viewing window with mild cleansers and a lens or cotton cloth. DO NOT use paper towels as they can scratch the window and reduce the cover’s ability to protect you from laser radiation. Clean the interior of the main bay thoroughly, removing any debris particles or deposits. Paper towels and window cleaners are recommended. When necessary, clean the cover of the laser tube after it has been allowed to cool completely. Allow any fluid used in any cleaning to dry completely before further use of the engraver.

Cleaning the Focus Lens

The lens has a durable coating and won’t be damaged by correct and careful cleaning. You should check the lens and the 3rd mirror daily and clean them if there is any debris or haze on their surface. Your laser will be less efficient and heat buildup on the oil or dust itself can damage the lens.

  1. Move the engraving table to a distance of approximately 4″ (10 cm) under the lens holder.

  2. Move the laser head into the center of the work and put a cloth under the lens holder so that the lens will not be damaged if it accidentally falls from its holder.

  3. Unscrew the lens holder, rotating to the left.

  4. Remove the pressurized air hose and laser guide connections.

  5. Once positioned over your clean lens-cleaning tissue, remove the lens from the lens holder by carefully turning the lens holder and letting the lens and its O-ring drop onto the cleaning cloth.

  6. Examine the O-ring and, if necessary, clean it with a cotton bud and a lens-cleaning tissue or cloth.

  7. Remove coarse dust as well as possible by blowing air onto the lens surface.

  8. Check the surface and, if necessary, clean the lens with the lens cleaning liquid and lens tissue or cloth.

  9. Hold the lens assembly by its edge with a lens-cleaning tissue and use a drop of lens-cleaning liquid. While holding the lens at an angle, flush both surfaces to wash away grime.

  10. Put the lens on a clean lens-cleaning tissue and put some lens-cleaning liquid on one side of the lens. Leave the liquid to take effect for approximately one minute and then gently wipe it away with lens-cleaning tissues soaked with lens-cleaning liquid. Dry this side of the lens with dry lens-cleaning tissues/cloth.

  11. Repeat the same cleaning process on the other side of the lens.
    NEVER use a cleaning tissue twice. Dust accumulated in the cleaning tissue could scratch the lens surface.

  12. Examine the lens. If it is still dirty, repeat the cleaning process above until the lens is clean. Do not touch the surface of the lens after cleaning.

  13. Carefully insert the lens into the lens holder, ensuring that its rounded convex side is facing upwards. Put the O-ring on top of the lens.

  14. Carefully reassemble the lens and laser head attachments in reverse order.

Cleaning the Mirrors

  • The mirrors should be similarly cleaned if there is any debris or haze on their surface to improve performance and avoid permanent damage. The 1st mirror is located in the back left of the machine beyond the far end of the Y axis. The end of the laser tube closest to this mirror is itself a semitransparent mirror that should be checked at the same time. The 2nd mirror is located on the Y axis at the left end of the X axis. The 3rd mirror is located on top of the laser head on the X axis. The most detritus accumulates on the 3rd mirror and it should be checked daily along with the focus lens. The laser tube and the 1st and 2nd mirrors can be checked daily if desired but are usually fine if they are only checked once a week.
  • The semitransparent mirror at the end of the laser tube should only be cleaned when the engraver is fully disconnected from power and the tube is fully cooled. Clean all four mirrors with lens-cleaning tissue or with cotton wetted with lens-cleaning liquid or isopropyl alcohol. The 3 positioning mirrors can be cleaned in place or removed for cleaning by turning them counterclockwise. Take care not to touch the surface of any mirror directly. Clean with gentle circular motions and avoid pressing hard enough to grind any debris or cause scratching. If any mirrors are removed for cleaning, reinstall them by turning them into place clockwise while again being careful to avoid any scratching.

Laser Path Alignment

  • Having a proper beam alignment is important for the overall efficiency of the machine and quality of its work. This machine went through a complete beam alignment before shipping. When the engraver first arrives and about once a week during normal operation, however, it is recommended that users confirm that alignment is still at acceptable levels and that the mirrors and focus lens have not shifted due to the movement of the machine.
  • You will need to place a piece of tape at each stage of the laser path, marking it to confirm that that stage remains correctly aligned. When it is not, you will use the laser tube’s brackets or the screws on the back of the misaligned mirror to correct the problem.
  • Once the provided tape runs out, we recommend masking tape as it is easy to manage and use.
    • Performing a beam alignment can expose the operator to small amounts of radiation if performed carelessly. Follow these procedures correctly and always take caution when performing a beam alignment.
    • Perform a beam alignment at low power levels: 15% or less. Any higher percentage will cause the laser to ignite the testing tape instead of marking it. Be sure that you set the Max. Power (not Min.) to 15%.

Laser Tube Alignment

To test the alignment of the laser tube with the 1st mirror, cut out a piece of tape and place it on the mirror’s frame.

  • DO NOT place the tape directly onto the mirror. Turn on the machine and set the power level to 15% or lower.
  • Press PULSE to manually fire the laser. You should be able to see a small mark on the tape. If it is not noticeable, press PULSE again.

Pressing PULSE activates the laser. Always make sure the path is clear between the laser and its target. Never allow foreign objects between the laser and its target. Take care not to leave any part of your body in the laser path while pressing the PULSE button.
The laser mark should be near the center of the hole. If the laser is not centered on the 1st mirror, cut the power to your laser and carefully adjust the laser tube in its brackets. This may require loosening the bolts on its stand. Be careful not to overloosen the bolts and not to overtighten them. Only adjust one stand at a time.

1st Mirror Alignment

  • After ensuring the laser is well aligned between the laser tube and 1st mirror, check the alignment between the 1st and 2nd mirrors. First, use the direction arrows on the control panel to send the 2nd mirror to the back of the bed along the Y axis.
  • Once set, place a piece of tape on the 2nd mirror’s frame. DO NOT place the tape directly onto the mirror. Repeat the steps from §5.4.1. If the laser is not centered on the 2nd mirror, you will need to adjust the 1st mirror’s set screws accordingly.
  • To adjust the mirror, loosen the nut on the screw and then slightly turn the screw either clockwise or counterclockwise. Each screw adjusts a different position or angle. Keep track of which screw you are adjusting and the direction of adjustment. Do not turn the screw more than ¼ turn at a time and, especially at first, test the position of the laser after each adjustment so that you learn the effect of each change. Test until the beam is well aligned and then retighten the nuts on the screws once all adjustments are completed.
  • Next, use the direction arrows on the control panel to send the 2nd mirror to the front of the bed along the Y axis.
  • Once set, place another piece of tape on the 2nd mirror’s frame. DO NOT place the tape directly onto the mirror. Repeat the steps from §5.4.1 and, if necessary, adjust the set screws on the 1st mirror. Test again until the beam is well aligned and retighten the nuts on the set screws.

2nd Mirror Alignment

After ensuring the laser is well aligned between the 1st and 2nd mirrors, check the alignment between the 2nd and 3rd mirrors. Repeat the steps and adjustments above, taking care to use the tape on the mirror’s frame and not its surface.

3rd Mirror Alignment

After ensuring the laser is well aligned between the 2nd and 3rd mirrors, check the alignment between the 3rd mirror and the workbed. First, unplug the air assist hose from the laser head. Then, place a piece of tape across the bottom of the laser head and press it onto the nozzle with some force. This will leave a ring mark that can help you check the accuracy. Repeat the steps from §5.4.1. If the laser is not centered through the laser head, adjust the 3rd mirror’s set screws accordingly as in §5.4.2. Test again until the beam is well aligned and retighten the nuts on the set screws.
When the laser is well centered along the entire path from the tube to the workbed, your laser mirrors are all correctly calibrated and (assuming they are clean) performing at optimum efficiency.

Lubrication

For best results, clean and lubricate the engraver’s guide rails every two weeks. Turn off the laser engraver. Gently move the laser head out of the way. Wipe away all dust and debris along the X and Y axis rails with a dry cotton cloth until they are shiny and clean. Do the same to the Z-axis screws. Lubricate both the rails and screws with white lithium grease. Gently move the laser head and X-axis to distribute the lubricant evenly along both rails and raise and lower the bed to distribute the lubricant evenly along the screws.

Parts Replacement

The engraver should not be modified or disassembled by anyone except trained and skilled professionals, but some consumable parts may require replacement after prolonged use. Be sure only to use identical or compatible replacement parts with this engraver. Contact your vendor or our technicians if you have any questions about fitment. Using incompatible components is highly dangerous and waives all the manufacturer’s liability for any damage or injury caused.
ALWAYS completely disconnect the engraver from its power supply before replacing any parts.
Take special care when replacing the laser tube or its power supply, as both have extremely high voltage connections. If you replace the power supply with an identical model, you will be able to use the same screw terminal blocks as a unit. If you change to a different laser power supply, refer to the following diagram:

  • FG: Ground Wire for the Mains and Case
  • AC₁: Neutral Wire to the Main Power
  • AC₂: Live Input from the Main Power
  • H: Connection for Active-High Devices
  • L: Connection for Active-Low Devices (like this machine)
  • P: Line to the Trigger, Water, & Other Systems (like the door switch) G: Ground Wire for the Control System, PWM Level Shifters, Potentiometers, &c.
  • IN: Input Power for PWM Level Shifters or Potentiometers
  • 5V: 5V Connection for Digital Signals

Disposal Instructions

Electrical products should not be disposed of with household products. In the EU and UK, according to the European Directive 2012/19/EU for the disposal of electrical and electronic equipment and its implementation in national laws, used electrical products must be collected separately and disposed of at the collection points provided for this purpose. Locations in Australia, Canada, and the United States may have similar regulations. Contact your local authorities or dealer for disposal and recycling advice.

Contact Us

  • Thank you again for choosing our laser equipment for your needs!
  • If you’re satisfied with the machine’s performance, please consider leaving a positive review on the website listing where you made your purchase. If you encounter any problem regarding this engraver, do not hesitate to contact us with your order ID(at MP Customer support Email: support@monportlaser.com and Amazon/ eBay Customer support Email:support@monportlaser.com ) and our customer service team will respond within 24 hours.
  • Thank you and we hope you will choose us again for your next purchase!

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals