Bear 4084100001398 1.5L Electric Kettle Instruction Manual

Bear 4084100001398 1.5L Electric Kettle

TechBear is a professional seller. We are committed to providing the best solution to your everyday needs. We work tirelessly to build a range of high- grade, innovative & stylish kitchenware to make your family life easier and more colourful.

Electric Kettle

Applicable Models: YSH-E15G1

• Warning : Please read this instruction manual carefully before using the product! This product is only for use in homes or similar places.
• Note: If the product pictures are slightly different from the actual product, please refer to the actual product.

User’s Guidance

Precautions

• Please read the “Safety Precautions” carefully before use and use it in the correct way to avoid damage or danger caused by improper use.
• Please read the main text of the instruction manual after understanding the contents of this section, and keep it properly after reading so that all users of this product can refer to it at any time.
• This product complies with the technical certification code for electrical products and relevant safety laws;
• Before use, please ensure that the power supply voltage is consistent with the rated voltage indicated on the nameplate of this product;
• Carefully conduct a comprehensive inspection of the plug and power cord. If any damage is found, it can only be repaired or replaced at a repair point designated by the manufacturer;
• This product is connected to AC power, and the socket it uses must have a grounding device;
• Do not pull, press or let the thread hang along sharp objects or sharp edges, and keep away from sources of heat and moisture;
• Single-phase fixed three-pole sockets with reliable grounding wires must be used. It is strictly prohibited to use soft cord mobile sockets and it is strictly forbidden to share the same socket with other electrical appliances;
• Never place this product on or near heat sources, such as cookers, ovens, etc.;
• If there is no water in the pot, please do not boil it dry, otherwise the service life of the product will be reduced;
• The product must be supervised while the product is boiling water. • Please do not let children get close and do not let children pull the power cord;
• Please do not immerse the power cord, plug, complete machine, etc. in water or other liquids to avoid damaging the product and causing electric shock;
• Before cleaning or when not in use, please turn off the power and unplug the power plug, and wait until the product has completely cooled before cleaning:
• If the body, base and other parts of the pot are damaged, please do not use it and send it to a designated maintenance service point for inspection and repair;
• During use, if any problem occurs, please unplug the power plug from the socket first;
• When water boils, high-temperature water vapor will spray out from the spout, which may cause burns. Be careful not to get close to the spout;
• When filling water, do not exceed the maximum water level mark. If the water is filled too full, water may spurt out when it boils;
• During the use of the product, it is a normal phenomenon that the pot body becomes hot. When pouring water, you can only lift the pot body by picking up the handle. Do not touch the high-temperature surface of the pot body with your hands to avoid burns;
• The power base that comes with the product is only for use with this product and must not be used for other purposes. When using this product for the first time, water should be filled to the highest level. After boiling, pour it away and rinse with cold water. Repeat the operation three times;
• If the power cord is damaged, it must be replaced by professionals from the manufacturer, its maintenance department or similar departments in order to avoid danger;
• Children and people with disabilities must use it under the supervision of a guardian;
• The kettle body should only be used on the original base.

Instructions

(Take soup as an example)

Put various ingredients that need to be stewed into the glass pot body and add an appropriate amount of water (the water added should not exceed the maximum water level), cover the pot lid assembly, and then place it on the base.

• Put in the food that needs to be stewed and add the appropriate amount of water (not exceeding the maximum water level)
• Cover the lid assembly
• Place the glass kettle body on the base, set the required function, and start stewing

Function Selection

When the power is turned on, a power-on beep will sound, the LED indicator light and the digital tube will all light up for 1S, then go out, and enter the standby state, and the digital tube will display

• Medicated Diet
• White Porridge
• Scented Tea
• Appointment
• Tremella
• Make Soup
• Boll Water
• Time
• Keep Warm
• Function
• Cancel
• Appointment

In standby mode, press the “Function/Cancel” button and select the “Make Soup” function. At this time, the “Soup Making” indicator light flashes, and the digital tube lights up to display the default working time of “1:30”. At this time, press the “Time” button to adjust the Working time (working time cannot be adjusted for some functions), after waiting for 5 seconds without operation, it enters the working state, and the corresponding function indicator light is always on, and the digital tube displays the current temperature;

Under working status, you can press the “Keep Warm” button to adjust the heat preservation temperature (some functions cannot ho adiustodi. Press the “Koon. Warm-button. and the digital scroon will flash. to.disolav.the current.sot insulation cannot be adjusted). Press the “Keep Warm” button and the digital screen will flash to display the currently set insulation temperature. Continue to pross the “Keep Warm” button to modity the insulation temperature. It there is no operation for 3 seconds, the setting will be completed and the digital screen will return to its original state;

When the water temperature reaches a certain temperature (except for the heat preservation function, it is usually 98 degrees or 99 degrees), the digital screen display changes from the original water temperature to a countdown timer (some functions do not have a countdown timer};

WORK COMPLETION STATUS

When the “make soup” task is completed, the product will make a beep-dip-beep sound, and then it will automatically enter the heat preservation state; after entering the heat preservation state, if the water continues to boil dry, it will make a long beep sound, and the digital tube will it always displays “E00” and flashes. After adding water to cool down, it can return to the standby state, and the digital tube displays “4-

Appointment Function

Take the soup-making reservation as an example: Make a reservation at B:00 in the morning for the 1-hour soup-making function at 11:00. After the food is placed in the pot: Turn on the power, and press the “Reservation” button in standby mode, the initial display time will be 0:30,and the reservation light will flash;

Press the “Appointment ” button again, and the reservation time will increase by 30 minutes, such as 0:30 1:00 •1:30-9:30 •0:00 (the reservation light goes out at this time) – 0:30…; Adjust the appointment time to 3:00;

Press the functionicancel button, and the reservation indicator light stays on. At this time, the “make soup” function is selected, the “make soup” indicator light flashes, and the digital screen displays the default time as 1:30.

After selecting the function, press the “Time” key to adjust the function time. The function time is adjusted to 1:00

After setting it for 5 seconds, the reservation time will be displayed as 3:00, and the reservation countdown will begin.

Basic Parameter Table

Feature Schedule

Cleaning and Maintenance

• After use, you must unplug the power plug and wait for the unit to cool before cleaning.
• Add a small amount of water and detergent into the kettle, scrub the inside of the kettle with a soft cloth or sponge, and then pour out the washing water. Then wash the inside of the kettle with clean water until it is clean. Pour out the water in the kettle and use a clean cloth. Wipe it clean. Do not clean the outer surface of the product directly with water.
• Do not use banana water, gasoline, detergent powder, hard brush or stainless steel wire ball to wipe, so as not to damage the surface.
• Do not put the whole machine into water for cleaning. The outer surface of the health pot can be wiped with a wet towel. Do not rinse it with water to avoid leakage and malfunction.
• If the product cannot be used normally, please check whether the power cord plug is plugged in properly and whether there is a power outage. Otherwise, please send it to our company’s repair station for repair, or entrust professionals to repair it. Do not disassemble and repair it yourself.
• When the product is not used for a long time, please clean it, put it in the packaging box and store it in a ventilated and dry place to avoid moisture, which will affect its use.

Frequently Asked Questions Analysis Form

• The electric kettle does not work does not heat.
• If the electric kettle has no visible damage:
• Check whether the socket and power cord plug are intact;
• Check whether the power cord is intact. If the soft cord of the power cord is damaged, it must be replaced by the manufacturer or its maintenance department or similar full-time personnel to avoid danger;
• If the electric kettle is dry-heated, the dry-heat protection device will automatically start. Add an appropriate amount of cold water to cool the heating plate, and then follow the instructions in the instruction manual again;
• The kettle automatically trips before the water boils. This is usually caused by the accumulation of scale in the kettle, which can be solved by removing the scale. It may also be caused by the kettle being used without water or with insufficient water, causing the dry boil protection device to activate;
• Restoring the working state: Wait until the kettle is completely cooled, and then the kettle can be reset to the working state. If it cannot work normally, it means that the kettle has not completely cooled down, and you need to wait a while longer. Usually, the electric kettle will start working again in about 15 minutes.

Light Does Not Shine:

• Is there a power outage?
• Is the power cord plug inserted into the outlet?
• Is the power outlet turned off?

Note: After analyzing the above phenomenon. If the fault still cannot be eliminated, please contact our company’s maintenance point or dealer. Non- professionals are strictly prohibited from disassembling and assembling the machine by themselves.

Scrap Disposal

Do not dispose of this as household waste; This product can be recycled and disposed of through our company’s maintenance points or recycling stations.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>