CORSAIR 20LAG9901 Light Strip Pro User Manual

20LAG9901 Light Strip Pro
User Manual

• Light Strip Pro and its controller are magnetic, which enables glueless installation on ferromagnetic metal surfaces. People with an implanted cardioverter defibrillator or pacemaker should avoid close or long-term contact with magnets and their magnetic field.

lnstallation

• Download and install Control Center for Mac. Windows, iOS or Android: elgato.com/download
• Connect the LEO tape to the controller. Connect the controller to the power supply and plug it into an electrical outlet. When you turn on the power, the Light Strip Pro will display a quick startup sequence. and then enter pairing mode.
• Launch the Control Center application and pair the Light Strip Pro. click the + icon. The Control Center application will guide you through the configuration process. To perform Wi-Fi pairing using a Mac. whjcz Light Strip Pro tape. click icon Wi-Fi and in the top right corner of the status menu and select a new accessory. After completing the configuration process in the Airport Tool, the Light Strip Pro will be available in the Elgato Control Center application.
• Use Control Center to load and unload the Light Strip Pro tape. brightness adjustment. precise color tuning and color temperature setting. If your computer does not have a Wi-Fi interface. use the Elgato Control Center app on your iOS or Android device. to add Light Strip Pro. Wi-Fi connection is only required for initial pairing. Once paired, you can control your Q Light Strip Pro using any wired or wireless device

Resetting

• The RESET button resets the Light Strip Pro to factory settings and forgets all Wi-Fi credentials. Press and hold the RESET button with a small tool for at least 1 O second until the light flashes 3 times. The Light Str p Pro will automatically restart and enter pairing mode.

Warning

• Light Strip Pro may become hot during prolonged use. Always be careful when handling.
•  Light Strip Pro is intended for indoor use only.
• Do not cover the product, especially the controller.
• Be especially careful when placing the tape near children.
• Do not leave Light Strip Pro exposed to direct sunlight.
• The glowing surface should be free from dirt and dust. If the Light Strip Pro tape becomes dirty, wipe it with a slightly soft cloth moistened with water and a mild, neutral detergent. Benzene, thinner and other volatile agents may cause permanent damage and should never be used for cleaning.
• Do not use the product for applications other than those specified in this manual or on the packaging.
• Do not use accessories other than those supplied with the product or marked as compatible by the manufacturer.

Light Strip Pro-QSG-230703_Print.indd

Documents / Resources

| CORSAIR 20LAG9901 Light Strip Pro [pdf] User Manual
20LAG9901 Light Strip Pro, 20LAG9901, Light Strip Pro, Strip Pro
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>