DISida Y30W Car Recorder User Manual
- June 16, 2024
- DISida
Table of Contents
DISida Y30W Car Recorder
Product Information
Specifications
- Model: HDUIULHQGVWKDQNRXYHUPXFKIRUEXLQJRXUSURGXFWVWKLVVLPSOH
- Multi-language quick use guide
- Car power interface
Product Usage Instructions
Step 1: Unboxing and Setup
- Remove the product from the packaging.
- Connect the car power interface to the product. Please use the recommended cables.
- Tear off the protective film from the lens.
Step 2: Basic Operation
To operate the product, follow these steps:
- Turn on the power switch located on the device.
- Use the control buttons to navigate through the menu options.
- Select the desired settings or functions by pressing the corresponding buttons.
- Refer to the multi-language quick use guide for specific instructions on different features.
Step 3: Troubleshooting and Maintenance
If you encounter any issues with the product, please refer to the troubleshooting section in the user manual. For maintenance, follow these guidelines:
- Regularly clean the lens with a soft cloth to remove dust or smudges.
- Avoid exposing the product to extreme temperatures or humidity.
- Keep the product away from direct sunlight or heat sources.
Frequently Asked Questions (FAQ)
- How do I change the language settings?
- To change the language settings, navigate to the “Settings” menu in the device and look for the language option. Select your preferred language from the available options.
- Can I use any car power interface?
- No, it is recommended to use the provided car power interface to ensure compatibility and safe operation. Using incompatible power interfaces may damage the product or pose a risk.
- How often should I clean the lens?
- It is recommended to clean the lens regularly, especially if you notice any decrease in image quality. Clean the lens using a soft cloth to remove dust or smudges.
- What should I do if the product malfunctions?
- If you experience any malfunctions with the product, please refer to the troubleshooting section in the user manual for possible solutions. If the issue persists, contact customer support for further assistance.
Product Overview
Simple instructions in many languages
Dear friends, thank you very much for buying our products, this simple multi- language quick-use guide can quickly solve some of your daily use of simple statements and installation methods, thank you for your patience, I hope you can use smoothly and get your approval. Thank you
FCC Statement
This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body Warm reminder: Press (Confirm) in the machine video to pause the current video (the blue light stops blinking at this time) to enter the above operation Settings!
-
the first use of the recorder, please format the memory card in the machine Settings.
-
please use a high-speed C10 or above speed memory card, the capacity is recommended not to exceed 32GB.
-
be sure to use the original parts of this product.
-
Time setting : (Press OK to pause the recording) Long press M (to enter the left picture), short press to find “Time setting”, short press OK to enter the right picture, short press To adjust the time, press OK the next option to adjust. Skip to OK or Cancel and press Select OKor Cancel to OK save the device.
-
Video playback: (Press OK to pause the) Press M (enter the left picture), tap OK to take a picture, press to switch the inside and outside of the car to take a picture Press M twice to enter the video playback mode (enter the picture on the right) Press the page Turn key Select a time period to play the video. Press OK Play/Pause the video
-
Memory formatting: (Press OK to pause recording first) Press M and hold for three seconds to enter the menu bar, press the page Turn button to find “Format” (as shown on the left). Press OK to format. (as shown on the right)
-
Loop recording firing setup time: (press OK to pause Press M and hold for three seconds to go to the menu bar, press Othe page key to find “Loop Video” (as shown on the left). Press OK to set the duration. (as shown on the right)
-
Check whether the memory card is correctly inserted into the slot. (Please use the Adjust memory card)
-
connect the car power interface (please use the original parts)
-
Tear the lens protective film.
-
Tear the protective film of the suction cup.
-
Connect the power supply and check that the device works normally before installing it.
-
Press the suction cup switch to install the suction cup in the desired position.
-
Hide the wire in AlB safety column (Note that there are two ways of wiring as shown in Figure 3&4).
-
The reverse video camera is fixed above the license plate(Skip this step if you have not purchased the reverse image)
-
or reverse image camera fixed inside the rear glass. (Skip this step if you have not purchased a reverse image)
-
Connect the power supply to complete the installation.