DS Wallet DS Passport Cover User Manual

DS Passport Cover

Product Specifications

• Compatibility: iOS, iPadOS, macOS
• Charging: Wireless charging
• Locator Setup: Bluetooth and WiFi required
• Warranty: One-year limited warranty
• Disposal: Follow safe electronic disposal guidelines

Product Usage Instructions:

Setting Up the Locator

1. Ensure WiFi and Bluetooth are enabled.
2. Press the power button for 3 seconds until the ringtone rings and the Controlling light blinks in white.
3. In the Apple Find My App, click Add Item, then click Other Supported Item.
4. Bring the DS Lable close to iPhone to identify the locator and click Connect.
5. Customize the name and emoji of the DS Lable to complete the setup.

Removing the Locator

1. In the Apple Find My App, click Items, then swipe left on the item you wish to remove.
2. After removal, the DS Passport Cover will sound a tone and flash a white light.

Charging the Locator

1. Align the battery coil position with a wireless charger.
2. When charging starts, a bell will sound, and a red light will appear.
3. Once fully charged, the light will turn green, indicating removal from the charger.

Safe Electronic Disposal
When disposing of the device, take it to a local e-waste center for recycling to protect the environment.

Restoring Factory Settings
To restore factory settings, press the power button four times, then press and hold for a few seconds until the device emits a white light and ringtone.

Leather Care Tips

1. Avoid damp environments to prevent leather mold.
2. Avoid direct sunlight to prevent aging, discoloration, and cracking.
3. Avoid contact with alcohol, vinegar, lemon juice, and detergents to prevent leather corrosion.
4. Clean surface stains with a damp towel or soft cloth, then air dry in a ventilated area.

Frequently Asked Questions (FAQ)

• Q: Is this device waterproof?
  A: No, this device is not waterproof. Avoid exposing it to water or moisture.

• Q: How do I know when the battery is low?
  A: The device will indicate a low battery with a specific light pattern or notification sound. Refer to the user manual for details.

DS Wallet Operating Instructions

*To use the Apple Find My app to locate this item, the latest version iOS, iPadOS, or macOS is recommended.

How to set up the locator
First make sure WiFi and Bluetooth are turned on

Make the DS Lable discovered following the steps:

1. Press the power button 3 seconds,after the ringtone rings and the Controlling light blinks in white,the DS Passport Cover is ready
2. Turn on the Apple “Find My” App，Click “Add Item” , then click “Other Supported ltem” .
3. Bring the DS Lable close to iPhone， identify the locator， then click “Connect”
4. Customize the “name” and “emoji” of the DS Lable,then the setting is complete.

How to remove the locator

1. Turn on the Apple “Find My” App， Click “items” , then Swipe left on the item you want to remove.
2. After removal , DS Passport Cover will sound a tone and a white light will flash。

How to charge the locator
*DS Wallet supports wireless charging function, you can use wireless charger to charge it.

1. Align the battery coil position with the wireless charger.
2. When the DS Wallet starts charging, it will sound a bell and light a red light.
3. When the DS Wallet is fully charged, it lights green, then please remove it from the charger.

Safe electronical disposal

The earth is our common home and DISIDUW attaches great importance to protecting the cleanliness of the environment and avoiding its pollution.
When your device reaches the end of their useful life, please dispose of at your locale-waste center to be recycled and properly discarded.
How to restoring the factory setting
Click the power button four times, and then press the power button for some seconds long; When the ringtone sounds, the light flashes in white quickly. That is completed.

Warning

1. This product is not a toy or edible.
2. Obstacles or large metal objects can interfere with the Bluetooth signal.
3. This product has a built-in lithium battery. Please do not put this product directly on fire or any place near heat or fire. Otherwise,the product may be damaged or malfunctioned,or even be dangerous.

Disclaimer

This is neither an anti-theft nor an anti-lost device. This device provides the last detected location.

Limited warranty

DISIDUW offers a one-year limited warranty against product defects, effective from the time of delivery.
Product defects do not include those resulting from accidents, product modification,or failure to follow instructions for use.

Leather Care Tip s

1. Keep dry and avoid damp environments to prevent leather mold.
2. Avoid direct sunlight to prevent aging, discoloration, and cracking.
3. Avoid contact with alcohol, vinegar, lemon juice, and detergents to prevent leather corrosion.
4. Use a damp towel or soft cloth to clean surface stains, then air dry in a ventilated area.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterferenc e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>