Banggood CS201 Health and Fitness Watch
- June 6, 2024
- banggood
Table of Contents
Banggood CS201 Health and Fitness Watch
Package Contents
How to Operate
Charge Your Watch
Properly attach the magnetic charging base to the back of the watch, then plug
the charging cable into a USB port on the computer, charging dock or power
bank for charging.
Input current: <0.3A
Input voltage: 5V DC
Charging time: about 2 hours
Note: It is recommended to use the universal charger with a certification
mark on the market.
Operate Your Watch
| Short Press| Long Press| ****
---|---|---|---
Power Key
| ****
1. Wake up the watch screen.
2. Return to the previous menu.
3. Continue the exercise
| ****
1. Power On
2. Power Off
3. End / Pause the exercise
Gestures Instructions
Tap the screen | Confirm to use this feature/Enter the sub-interface. |
---|---|
Swipe left /right | Switch screen display. |
Swipe up/down | Switch screen display. |
Long press the screen from the home screen | Change watch face. |
Turn on Your Watch
Long press the power key to turn on your watch. If that fails, then please
fully charge the watch first.
Download APP
Download the “Zeroner Health Pro” from the APP Store or Google Play.The
Zeroner Health Pro App is available for iOS in the App Store and for Android
in the Google Play. Please search for “Zeroner Health Pro” to download and
install the App
Connect Your Watch
After downloading, open the app and register an account, fill in your personal
information (height, weight, date of birth) truthfully, and then complete the
connection according to the operation instructions on app.
Note:
- In order to connect the watch to your phone successfully, you need to turn on the Bluetooth of your phone and connect to your device through the app.
- The Zeroner Health Pro App on the Android phone needs to be given permission to access your location, otherwise the device may not be searched.
- The first time you connect to the Zeroner Health Pro App, the date & time on your phone will be synchronized to the watch, and previous data for steps, calories & distance on the watch will be cleared.
Wear Your Watch
- For optimized tracking of the measured values, we recommend wearing the device with one finger’s width below your wrist bone.
- Please make sure the device is fairly snug against your skin and does not slide up or down your wrist during exercise.
Replace the Strap
Please choose the strap with a width of 20mm if you want to replace it.
- Remove the strap from the watch by sliding the snap lock on the strap.
- Align the new strap with the watch and buckle the strap in.
- Pull the strap lightly to make sure it is buckled in the watch.
Main Features
Heart Rate Monitor
Built-in PPG heart rate sensor coupled with HR algorithm, the watch can accurately monitor your heart rate during wearing.
- The watch can monitor your 24-hour real-time heart rate, you can choose to turn on or off this function.
- You can set the upper and lower limit of heart rate on the Zeroner Health Pro App. If your heart rate is lower than the lower limit or higher than the upper limit during exercise, the watch will remind you.
- Heart rate data can be synchronized to the Apple Health.
- Five heart rate zones display during exercise: all detailed data can be viewed after connecting and syncing to the app.
Note: The light signal transmission might be blocked if your skin is too dark or with excessive hair; or improper wearing also may lead to measurement failure.
Swimming Recorder
There are two swimming modes on CS201 watch: free mode (Open Water) and pool mode.
- The watch can record swimming distance, SWOLF, stroke data, average pace and other data.
- Stop exercise: long press the right button once to enter pause interface, then long press the right button to stop swimming.
- Switch display data: press the right key to switch the display data under swimming mode.
Note:
- CS201 is only used for swimming. If wearing for diving, it may cause damage to the device. Such damage is not within the scope of warranty.
- CS201 cannot monitor your heart rate during swimming.
- Under the swimming mode, the touch function is automatically closed.
- In the pool mode, please set the distance of the swimming pool correctly so as to calculate the distance and other data accurately. If the swimming distance is less than one lap, then the distance cannot be calculated.
- The average number of SWOLF = strokes per length + the time for the length.
Sleep Monitor
When you wear the watch to sleep in the evening, you can check your sleep data monitored on the App after you get up in the morning. The watch goes into sleep monitoring from 8:00pm to 9:00am the next day.
Note:
- The sleep monitoring will be stopped after you get up and move for 5-10 minutes.
- The watch does not record daytime sleep data.
More Information
Water Resistance Instructions
Water resistant rating: 5ATM
The water resistant performance of the device is not permanently valid, it may
diminish as time passes. The device can be used during washing hands, swimming
in the shallow water or in rainy days, but not support hot water shower,
diving, surfing, etc. It does not have waterproof effect on corrosive liquids
such as seawater, acidic and alkaline solutions, and chemical reagents. If you
inadvertently encounter corrosive liquid, please clean with clear water and
wipe it dry. The damage caused by abuse or improper use is not covered by the
warranty.
The following conditions may affect the water resistant performance, and should be avoided when using:
- The watch falls, bumps, or suffers from other impacts.
- The watch is exposed to soap water, shower gel, detergent, perfume, lotion, oil, etc.
- Hot and humid scenes such as hot baths and saunas.
Specifications
Physical size | 40×35×8.5MM | Adjustable strap | 150mm-250mm |
---|---|---|---|
Screen type | 1.3 inch TFT color square display | Working temperature | 0-45 ℃ |
Weight | About 45g | Resolution ratio | 240×240 pixels |
Battery capacity | 170mAh Li-Polymer battery |
Battery life
| 5-7 days (receive an average of 50 messages & 5 calls per day; raise your wrist to activate screen up 50 times; exercise for half an hour per day; turn on 24-hour automatic heart rate monitoring.)
Firmware Upgrade
When there is an new firmware version, there will be a notification in the
app. Go to the “Device” interface of the app and select firmware upgrade.
Note:
- Make sure that the battery level is more than 50% before upgrading.
- During the upgrade process, you can not quit halfway if the progress bar moves, keep the screen of your phone bright, and only when the upgrade is completed can you exit the interface. Otherwise, the upgrade will fail.
Upgrade Failed
Wait for the watch to restart automatically if upgrade fails. Then reconnect
your watch to the app for upgrading again.
Device Maintenance
Device Care
- Do not use a sharp object to clean the device.
- Avoid using solvents, chemical cleaners or insect repellents that might damage plastic components of the device.
- Thoroughly rinse the device with fresh water after exposure to chlorine, salt water, sunscreen, cosmetics, alcohol or other harsh chemicals to avoid damage to the device.
- Avoid pressing the key on the device while it is under water.
- Avoid extreme shock and harsh treatment since it can reduce the product life.
- Do not exposure to extremely high or low temperatures for a long time, which can cause permanent damage.
- After each training, please rinse the watch with clean water.
Clean Your Watch
- Gently wipe the device by using a flannelette with a neutral mild detergent;
- Wait for dry
Note:
Even the fainter sweat or moisture may cause the corrosion of the charging
terminal when charging the device, which will also hinder the transmission of
data and affect the charging.
Keep your watch and wrist dry
Be sure that your wrist is dry before you put on your watch. After washing or sweating, dry it thoroughly before putting it back on your wrist. Don’t wear your watch too tight.
Important Safety Tips
- Always consult your physician before beginning or modifying any exercise program.
- The device, accessories, heart rate monitor and related data are intended to be used only for exercise monitoring not for medical purposes.
- The heart rate data are for reference only, and no liability is accepted for the consequences of any wrong interpretation.
- Do not expose the watch to a heat source or in a high-temperature location, for example, in an unattended car in the sun. To prevent the possibility of damage, take out the device from the car or store it out of direct sunlight.
- If you want to store the watch for a long time, please place it within the temperature ranges specified in this manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>