Zhenpin WC02 Wireless Charger Instructions
- June 16, 2024
- Zhenpin
Table of Contents
Zhenpin WC02 Wireless Charger
Product Information
Specifications
- Model: D2
- Input: 5V/3A 9V/2.5A 12V/2A
- Output: 2.5W/5W/15W(Max)
- Conversion Efficiency: 80%-85%
- Working Frequency: 115-205kHz;321.9KHz~336.9KHz
Product Description
This product is a 3-in-1 fast wireless charger station. It is equipped with
a smart chip and can simultaneously charge mobile phones, watches, and
wireless headsets that support the QI standard. The charger achieves high
efficiency, stable performance, and allows you to enjoy the convenience of
wireless charging technology. Additionally, it can wirelessly charge other
electronic devices that support the Qi standard.
Charging Indicator Status
The charging indicator on the charger station provides status updates during
the charging process. Please refer to the user manual for specific indicator
meanings.
Product Usage Instructions
Step 1: Plug in the Wireless Charger
Connect the wireless charger to a QC3.0/PD power adapter using the provided
cable. It is important to use a PD/QC3.0 power adapter and cable to ensure
optimal charging efficiency.
Step 2: Place Devices on the Charging Area
Position your mobile phone, watch, or wireless headsets on the designated
charging area of the charger station. Ensure proper alignment for effective
charging.
Charging Multiple Devices
If you wish to charge multiple devices simultaneously, ensure each device is
placed correctly on the charging area.
Important Warnings
Modifications or changes to the wireless charger that are not expressly
approved by the responsible party may void the user’s authority to operate the
equipment. This device complies with part 15 of the FCC Rules and must adhere
to the following conditions:
- The device must not cause harmful interference.
- The device must accept any interference received, including interference that may cause undesired operation.
To minimize interference:
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a different circuit from the receiver.
- Consult the dealer or an experienced radio/TV technician for assistance if needed.
The equipment complies with FCC Radiation exposure limits for uncontrolled environments. It is recommended to install and operate the equipment with a minimum distance of 20cm between the radiator and your body.
Frequently Asked Questions (FAQ)
-
Q: Can I charge devices other than mobile phones, watches, and wireless headsets?
A: Yes, you can wirelessly charge other electronic devices that support the Qi standard using this charger station. -
Q: What kind of power adapter and cable should I use?
A: It is important to use a QC3.0/PD power adapter and cable to ensure optimal charging efficiency. Using other adapters or cables may reduce charging efficiency. -
Q: Can I charge multiple devices at the same time?
A: Yes, you can charge multiple devices simultaneously. Ensure each device is placed correctly on the charging area for effective charging.
INTRODUCTION
Products brief introduction
This product is a 3-in-1 fast wireless charger station, the preferred smart
chip, which can simultaneously charge mobile phones/watch/wireless headsets
that support the QI standard, achieve high efficiency, stable performance,
easy to enjoy wireless charging technology life. lt can also wirelessly charge
other electronic devices that support Qi standard.
Product Parameter
- Model: D2
- Input: 5V/3A 9V/2.5A 12V/2A
- Output: 2.5W/5W/15W(Max)
- Conversion Efficiency: 80%-85%
- Working Frequency: 115-205kHz;321.9KHz~336.9KHz
Operation Steps
-
Plug in the Wireless charger using a QC3.0/PD power adapter and cable.
Attention: Choose the PD/QC3.0 power adapter and cable is very important, if not may reduce charging efficiency. -
Place the mobile phone/watch/wireless headsets in the right charging area to stat charging.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.