Zhenpin D1 Wireless Charging Station User Manual

Zhenpin D1 Wireless Charging Station

Product Information

• Specifications
  • Model: D1
  • Weight: 76g
  • Size: 1307070mm
  • Input: 9V 2A 12V 1.5A
  • Conversion Efficiency: 80%-85%
  • Working Frequency: 110-205kHz
  • Output: 15W(Max)
• Product Features
  • The Wireless Charging Station is a two-in-one wireless charger station with a preferred smart chip.
  • It supports wireless chargingfor cell phones and other electronic devices that support Qi standards.
  • The charger station offers high efficiency, and stable performance, and allows you to enjoy wireless charging technology.
• The product features include:
  • Wireless charging position
  • Charging indicator
  • Power indicator
  • Type-C input
  • Wireless charging stand
• Compatibility
  • The Wireless Charging Station is compatible with all Qi standard phones, including:
  • iPh12 – iPh15 series and more
  • iPh8 series/iPhX series/iPh11 series + Magnetic Cases
  • Android smartphones + Metal Ring
• Cautions
  • Please read the following cautions before using the Wireless Charging Station:
  • Please do not pull the power cord strongly to avoid power cord breakage or detachment.

Product Usage Instructions

• Installation
  • Take off the case from your phone.
  • Install the bracket into the Wireless Pad.
• Charging Setup
  • Plug in the Wireless charger using a QC3.0/PD power adapter and cable.
  • Attach your phone to the charging pad.
• FAQ
  • 1. The phone is not charging when you put it on.
  • The phone may not be aligned with the charging induction area or the receiving coil may not be properly installed.
  • 2. Why does the charging get hot?
  • It is normal for the receiving coil or transmitting board to get hot during wireless charging.
  • 3. Is the phone charging intermittently?
  • a. The adapter charging current is not enough or the voltage is unstable, please use a QC3.0/PD fast charging adapter.
  • b. The charging position is too partial, and the electromagnetic induction is not good. You can adjust the charging position.

Products

• This product is a two-in-one wireless charger station, the preferred smart chip, supporting cell phones’ wireless charging, achieving high efficiency, and stable performance, easy to enjoy wireless charging technology life.
• lt can also wirelessly charge other electronic devices that support the Qi standard.
  1. Wireless charging position
  2. Power Indicator
  3. Wireless charging stand
  4. Charging indicator
  5. Type-C input

Charging Indicator Status

• Standby——- Lamp out 4
• Charging——- Green light is always on 4

Product parameters

• Model: D1
• Weight: 76g
• Size: 1307070mm
• Input: 9V-2A 12V-1.5A
• Conversion Efficiency: 80%-85%
• Working Frequency: 110-205kHz
• Output: 15W(Max)

Support devices

Compatibility With (All Qi Standard Phones):

1. iPh12 – iPh15 series and more.
2. iPh8 series/iPhX series/iPh11 series + Magnetic Cases
3. Android smartphone + Metal Ring

Instructions

1. Take off the case and install the bracket into the Wireless Pad.
2. Plug in the Wireless charger using a QC3.0/PD power adapter and cable.
3. Attach your phone to charge.

Cautions

1.  Please do not pull the power cord strongly to avoid the power cord breaking or falling off.
2. Do not disassemble or put into fire or water to avoid short circuits and leakage.
3. Do not use the product in severe heat, humidity or corrosive environments to avoid damage to the circuit leakage.
4. Please do not give children to play to avoid unnecessary accidents.
5. When using fast charging, please use a qualified QC3.0/ PD charging power adapter and fast charging cable, otherwise it may cause charging instability.
6. Please do not put metal debris or magnetic cards on the charging board, which may cause damage or abnormalities to the charger.
7. lf you encounter the receiving coil or transmitting board overheating during use, resulting in stopping charging, please remove the charging product, wait for it to cool down and then try charging again.

FAQ

1. The phone is not charging when you put it on?
   • The phone is not aligned with the charging induction area or the receiving coil is not properly installed.
2. Charging is hot?
   • It is normal for the receiving coil or transmitting board to get hot during wireless charging.
3. Is the phone charging intermittently?
   • A. The adapter charging current is not enough or the voltage is unstable, please use QC3.0/PD fast charging adapter.
   • B. The charging position is too partial, and the electromagnetic induction is not good, you can adjust the charging position.
4. The host indicator is normal, but the phone does not work.
   • Cell phone receiving coil failure, suggest updating the receiving coil or repairing the phone(built-in receiving circle)
5. Charging is slow?
   • If the phone itself or the external receiver coil allows wireless charging current size is different, or the phone charging standby power consumption is large, it is recommended to reduce the phone standby program.
   • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC

NOTE: This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with the FCC Radiation exposure limit set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Please kindly read the user manual before using it and keep it for future reference.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>