nVent HOFFMAN LMK15 Inline DIN Rail or Panel Mounting Brackets Owner’s Manual
- June 16, 2024
- nVent HOFFMAN
Table of Contents
nVent HOFFMAN LMK15 Inline DIN Rail or Panel Mounting Brackets
Product Information
Specifications
- Material: Mild Steel
- Color: Unpainted
- Finish: Zinc Plated
- Thickness: 2.66 mm
Product Information
The Inline DIN Rail or Panel-Mounting Brackets are designed to be used as a mounting framework for installing DIN rails or a panel. These brackets are offset, providing additional space in front of or behind the mounted equipment.
Features & Benefits
- Mounting hardware included
Catalog Numbers and Hole Quantity
| Catalog Number | Hole Quantity |
|---|---|
| LMK15 | 5 |
| LMK20 | 9 |
| LMK23 | 11 |
| LMK25 | 13 |
| LMK30 | 17 |
| LMK35 | 21 |
Fits InLine Enclosure
The brackets are designed to fit InLine enclosures when the measurement A or B is equal to the respective values:
| A or B | Enclosure Size |
|---|---|
| 150 mm | LMK15 |
| 200 mm | LMK20 |
| 230 mm | LMK23 |
| 250 mm | LMK25 |
| 300 mm | LMK30 |
| 350 mm | LMK35 |
Note: DIN3 type rails require brackets for installation.
Enclosures with a length of 600 mm or longer require two sets of brackets for
mounting panels.
Product Usage Instructions
Installation Steps
- Choose the appropriate catalog number based on the desired hole quantity and the size of the InLine enclosure.
- Ensure that the DIN3 type rails are available if required for installation.
- If mounting panels on enclosures with a length of 600 mm or longer, make sure to have two sets of brackets.
- Position the brackets on the desired location for mounting.
- Secure the brackets using the included mounting hardware.
- If installing DIN rails, attach them to the brackets using appropriate screws or fasteners.
- If mounting a panel, position it between the brackets and secure it with screws or fasteners.
Additional Notes
- Make sure to follow local electrical codes and regulations during installation.
- Ensure that the brackets are securely attached to provide stable support for the mounted equipment.
- Regularly inspect the brackets and mounting hardware for any signs of damage or wear and replace if necessary.
Cleaning and Maintenance
- To clean the brackets, use a mild detergent and a soft cloth.
- Avoid using abrasive cleaners or materials that may scratch the surface.
- Regularly check for any signs of corrosion or rust and address them accordingly.
Troubleshooting
- If you encounter any issues during installation or usage, please refer to the troubleshooting section in the user manual or contact our customer support for assistance.
Frequently Asked Questions
- Q: Can these brackets be used for both DIN rails and panels?
- A: Yes, the brackets are designed to support the installation of both DIN rails and panels.
- Q: Are the mounting hardware included with the brackets?
- A: Yes, the brackets come with the necessary mounting hardware.
- Q: Can I use these brackets with enclosures longer than 600 mm?
- A: Yes, for enclosures with a length of 600 mm or longer, two sets of brackets are required for mounting panels.
- Q: Are the brackets compatible with DIN3 type rails?
- A: Yes, brackets are required for installing DIN3 type rails.
- Q: Can I paint the brackets to match my enclosure?
- A: The brackets come unpainted, but you can paint them using appropriate methods and materials if desired.
Use as a mounting framework to install DIN rails or a panel. Bracket is offset for additional space in front of or behind mounted equipment.
FEATURES, BENEFITS & SPECIFICATIONS
FEATURES & BENEFITS
- Mounting hardware included
SPECIFICATIONS
- Color: Unpainted
- Finish: Zinc Plated
- Thickness: 2.66 mm
Table 1/1
Table 1/1
Catalog Number| Hole Quantity| Fits InLine Enclosure
LMK15| 5| When A or B =
150 mm
LMK20| 9| When A or B =
200 mm
LMK23| 11| When A or B =
230 mm
LMK25| 13| When A or B =
250 mm
LMK30| 17| When A or B =
300 mm
LMK35| 21| When A or B =
350 mm
Brackets are required for DIN3 type rails.
600-mm and longer enclosures require two sets of brackets for mounting panels.
Contact
- 2100 Hoffman Way
- Anoka, MN 55303-1745 | USA
- 763.421.2240
- nVent.com
Our powerful portfolio of brands:
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.