2023 Grand Cherokee Grand Cherokee L

Product Information: 2023 GRAND CHEROKEE/GRAND CHEROKEE L

Specifications:

• Roadside Assistance: 24 hours, 7 days a week

• Customer Assistance: Call 1-800-521-2779 or visit
  chrysler.rsahelp.com (USA), Call 1-800-363-4869 or visit
  fca.roadsideaid.com (Canada)

• Services: Flat Tire Service, Out Of Gas/Fuel Delivery, Battery
  Jump Assistance, Lockout Service, and Towing Service

• FCA US LLC reserves the right to modify the terms or
  discontinue the Roadside Assistance Program at any time

Product Usage Instructions:

Getting to Know Your Vehicle

Keys

The vehicle comes with a Key Fob that allows you to lock and
unlock the doors and start the engine.

Sentry Key

The Sentry Key is a feature that provides theft protection. It
contains an electronic chip that is recognized by the vehicle when
the key is inserted into the ignition switch.

Ignition Switch

The ignition switch is used to start the engine. There are
different types of ignition switches available, including Keyless
Enter ‘n GoTM Ignition for easy and convenient starting.

Remote Start — If Equipped

If your vehicle is equipped with remote start functionality, you
can start the engine from a distance using the remote. There are
additional features such as remote start front defrost activation,
comfort systems activation, and windshield wiper de-icer
activation, if equipped.

Vehicle Security System — If Equipped

If your vehicle is equipped with a security system, you can arm
and disarm the system using the provided instructions. The system
also includes features like tamper alert and manual override.

Deluxe Vehicle Security System — If Equipped

If your vehicle is equipped with a deluxe vehicle security
system, you can arm and disarm the system using the provided
instructions. The system also includes a manual override
feature.

Doors

The vehicle has manual and power door locks. If equipped with
Keyless Enter ‘n GoTM, you can enter the vehicle without using the
key. There are also options for automatic unlocking on exit,
automatic door locks, and child-protection door lock system for the
rear doors.

Steering Wheel

The steering wheel can be manually tilted and telescoped or
powered tilted and telescoped, depending on the vehicle’s
equipment. If equipped, there is also a heated steering wheel
feature.

Uconnect Voice Recognition Quick Tips — If Equipped

If your vehicle is equipped with Uconnect Voice Recognition, you
can use voice commands to control various functions. The manual
provides quick tips on introducing voice recognition, basic voice
commands, getting started, and additional information.

FAQ:

Q: How do I access roadside assistance?

A: You can access roadside assistance by calling 1-800-521-2779
or visiting chrysler.rsahelp.com (USA), or calling 1-800-363-4869
or visiting fca.roadsideaid.com (Canada).

Q: Can I modify or alter my vehicle?

A: Vehicle modifications or alterations should be done in
accordance with the guidelines provided by FCA US LLC. Please refer
to the Vehicle Modifications/Alterations section in the Owner’s
Manual for more information.

Q: What services are included in roadside assistance?

A: Roadside assistance services include flat tire service, out
of gas/fuel delivery, battery jump assistance, lockout service, and
towing service. For more information, please refer to the Customer
Assistance chapter in the Owner’s Manual.

2023 GRAND CHEROKEE/GRAND CHEROKEE L OWNER’S MANUAL

This Owner’s Manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle. This manual may also include a description of features and equipment that are no longer available or were not ordered on this vehicle. Please disregard any features and equipment described in this manual that are not on this vehicle. FCA US LLC reserves the right to make changes in design and specifications, and/or make additions to or improvements to its products without imposing any obligation upon itself to install them on products previously manufactured. With respect to any vehicles sold in Canada, the name FCA US LLC shall be deemed to be deleted and the name FCA Canada Inc. used in substitution therefore. This Owner’s Manual is intended to familiarize you with the important features of your vehicle. Your most up-to-date Owner’s Manual, Radio Instruction Manual and Warranty Booklet can be found by visiting the website on the back cover.
ROADSIDE ASSISTANCE
24 HOURS, 7 DAYS A WEEK AT YOUR SERVICE. CALL 1-800-521-2779 OR VISIT CHRYSLER.RSAHELP.COM (USA) CALL 1-800-363-4869 OR VISIT FCA.ROADSIDEAID.COM (CANADA) SERVICES: Flat Tire Service, Out Of Gas/Fuel Delivery, Battery Jump Assistance, Lockout Service and Towing Service Please see the Customer Assistance chapter in this Owner’s Manual for further information.
FCA US LLC reserves the right to modify the terms or discontinue the Roadside Assistance Program at any time. The Roadside Assistance Program is subject to restrictions and conditions of use, that are determined solely by FCA US LLC.
WARNING: Operating, servicing and maintaining a passenger vehicle or off- highway motor vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to w w w.P6 5 Wa r nings.c a .gov/pa sse nge r-ve hicle .

TABLE OF CONTENTS
1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 1 2 GETTING TO KNOW YOUR VEHICLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2 3 GETTING TO KNOW YOUR INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 3 4 STARTING AND OPERATING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 4 5 MULTIMEDIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 5 6 SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 6 7 IN CASE OF EMERGENCY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252 7 8 SERVICING AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 8 9 TECHNICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 320 9 10 CUSTOMER ASSISTANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326 10 11 INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330 11

2
INTRODUCTION
SYMBOLS KEY . . . . . . . . . . . . . . . . . . . . . . . 9 ROLLOVER WARNING . . . . . . . . . . . . . . . . . . 9 VEHICLE MODIFICATIONS/ALTERATIONS . . . . . . 10 SYMBOL GLOSSARY . . . . . . . . . . . . . . . . . . 10
GETTING TO KNOW YOUR VEHICLE
KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Key Fob . . . . . . . . . . . . . . . . . . . . . . . 17
SENTRY KEY . . . . . . . . . . . . . . . . . . . . . . . 20 IGNITION SWITCH . . . . . . . . . . . . . . . . . . . . 20
Keyless Enter `n GoTM Ignition . . . . . . . . . . 20
REMOTE START — IF EQUIPPED . . . . . . . . . . . . 22 How To Use Remote Start . . . . . . . . . . . . . 22 To Exit Remote Start Mode . . . . . . . . . . . . 22 Remote Start Front Defrost Activation — If Equipped . . . . . . . . . . . . . . . . . . . . . 23 Remote Start Comfort Systems — If Equipped . 23 Remote Start Windshield Wiper De-Icer Activation — If Equipped . . . . . . . . . . . . . . . . . . . . . 23 Remote Start Abort Message . . . . . . . . . . . 23
VEHICLE SECURITY SYSTEM — IF EQUIPPED . . . . 23 To Arm The System . . . . . . . . . . . . . . . . 23 To Disarm The System . . . . . . . . . . . . . . . 24 Rearming Of The System . . . . . . . . . . . . . 24 Security System Manual Override . . . . . . . . . 24 Tamper Alert . . . . . . . . . . . . . . . . . . . . . 24
DELUXE VEHICLE SECURITY SYSTEM — IF EQUIPPED . 24 To Arm The System . . . . . . . . . . . . . . . . . 24 To Disarm The System . . . . . . . . . . . . . . . 25 Security System Manual Override . . . . . . . . 25

DOORS . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Manual Door Locks . . . . . . . . . . . . . . . . 25 Power Door Locks . . . . . . . . . . . . . . . . . 26 Keyless Enter `n GoTM — Passive Entry . . . . . . 26 Automatic Unlock Doors On Exit . . . . . . . . . 29 Automatic Door Locks — If Equipped . . . . . . . 29 Child-Protection Door Lock System — Rear Doors . 29
STEERING WHEEL . . . . . . . . . . . . . . . . . . . 29 Manual Tilt/Telescoping Steering Column — If Equipped . . . . . . . . . . . . . . . . . . . . . 29 Power Tilt/Telescoping Steering Column — If Equipped . . . . . . . . . . . . . . . . . . . . . 30 Heated Steering Wheel — If Equipped . . . . . . 30
UCONNECT VOICE RECOGNITION QUICK TIPS — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . 30
Introducing Voice Recognition . . . . . . . . . . . 30 Basic Voice Commands . . . . . . . . . . . . . . 31 Get Started . . . . . . . . . . . . . . . . . . . . . 31 Additional Information . . . . . . . . . . . . . . . 31
DRIVER AND PASSENGER MEMORY SETTINGS — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . 31
Programming The Memory Feature . . . . . . . . 32 Linking And Unlinking The Key Fob To Memory . 32 Memory Position Recall . . . . . . . . . . . . . . 32
SEATS . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Manual Adjustment Front Seats — If Equipped . 33 Manual Adjustment Rear Seats . . . . . . . . . . 34 Power Adjustment Front Seats — If Equipped . . 37 Power Adjustment Rear Seats — If Equipped . . 39 Power Seatback Massage — If Equipped . . . . 40 Heated Seats — If Equipped . . . . . . . . . . . 40 Ventilated Seats — If Equipped . . . . . . . . . . 41 Head Restraints . . . . . . . . . . . . . . . . . . . 41

MIRRORS . . . . . . . . . . . . . . . . . . . . . . . . 43 Inside Rearview Mirror . . . . . . . . . . . . . . 43 Illuminated Vanity Mirrors . . . . . . . . . . . . . 44 Outside Mirrors . . . . . . . . . . . . . . . . . . . 45 Outside Automatic Dimming Mirror — If Equipped . . . . . . . . . . . . . . . . . . . . . 45 Power Mirrors . . . . . . . . . . . . . . . . . . . 45 Automatic Power Folding Mirrors — If Equipped . . . . . . . . . . . . . . . . . . . . . 46 Heated Mirrors — If Equipped . . . . . . . . . . 46 Tilt Side Mirrors In Reverse — If Equipped . . . . 46
UNIVERSAL GARAGE DOOR OPENER (HomeLink®) — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . 46
Before You Begin Programming HomeLink® . . 47 Erasing All The HomeLink® Channels . . . . . . 47 Identifying Whether You Have A Rolling Code Or Non- Rolling Code Device . . . . . . . . . . . . . . 47 Programming HomeLink® To A Garage Door Opener . . . . . . . . . . . . . . . . . . . . . . . . 47 Programming HomeLink® To A Miscellaneous Device . . . . . . . . . . . . . . . . . . . . . . . . 48 Reprogramming A Single HomeLink® Button . . 48 Canadian/Gate Operator Programming . . . . . 48 Security . . . . . . . . . . . . . . . . . . . . . . . 49 Troubleshooting Tips . . . . . . . . . . . . . . . . 49
EXTERIOR LIGHTS . . . . . . . . . . . . . . . . . . . 49 Headlight Switch . . . . . . . . . . . . . . . . . . 49 Multifunction Lever . . . . . . . . . . . . . . . . 50 Daytime Running Lights (DRLs) — If Equipped . 50 High/Low Beam Switch . . . . . . . . . . . . . . 51 Automatic High Beams — If Equipped . . . . . . 51 Flash-To-Pass . . . . . . . . . . . . . . . . . . . . 51 Automatic Headlights . . . . . . . . . . . . . . . 51

Parking Lights And Panel Lights . . . . . . . . . 51 Headlights On Automatically With Wipers . . . . 51 Headlight Illumination On Approach . . . . . . . 52 Headlight Delay . . . . . . . . . . . . . . . . . . 52 Lights-On Reminder . . . . . . . . . . . . . . . . 52 Front Fog Lights — If Equipped . . . . . . . . . . 52 Turn Signals . . . . . . . . . . . . . . . . . . . . 53 Lane Change Assist — If Equipped . . . . . . . . 53 Automatic Headlight Leveling — If Equipped . . 53 Battery Saver . . . . . . . . . . . . . . . . . . . . 53 INTERIOR LIGHTS . . . . . . . . . . . . . . . . . . . . 53 Courtesy Lights . . . . . . . . . . . . . . . . . . . 53 WINDSHIELD WIPERS AND WASHERS . . . . . . . . 55 Windshield Wiper Operation . . . . . . . . . . . . 55 Rain Sensing Wipers — If Equipped . . . . . . . 56 Rear Wiper And Washer . . . . . . . . . . . . . . 56 Windshield Wiper De-Icer — If Equipped . . . . . 56 CLIMATE CONTROLS . . . . . . . . . . . . . . . . . . 56 Automatic Climate Control Descriptions And Functions . . . . . . . . . . . . . . . . . . . . . . 57 Automatic Temperature Control (ATC) . . . . . . 62 Climate Voice Recognition . . . . . . . . . . . . . 62 Operating Tips . . . . . . . . . . . . . . . . . . . 62
INTERIOR STORAGE AND EQUIPMENT . . . . . . . . 63 Storage . . . . . . . . . . . . . . . . . . . . . . . 63 Lighted Cupholders — If Equipped . . . . . . . . 65 Sun Screens — If Equipped . . . . . . . . . . . . 65 USB/AUX Control . . . . . . . . . . . . . . . . . . 65 Electrical Power Outlets . . . . . . . . . . . . . . 67 Power Inverter — If Equipped . . . . . . . . . . . 68 Wireless Charging Pad — If Equipped . . . . . . 68
WINDOWS . . . . . . . . . . . . . . . . . . . . . . . . 69 Power Window Controls . . . . . . . . . . . . . . 69 Wind Buffeting . . . . . . . . . . . . . . . . . . . 70

POWER SUNROOF — IF EQUIPPED . . . . . . . . . . 71 Single Pane Power Sunroof — If Equipped . . . . 71 Dual Pane Power Sunroof — If Equipped . . . . . 72
HOOD . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Opening The Hood . . . . . . . . . . . . . . . . . 74 Closing The Hood . . . . . . . . . . . . . . . . . . 74
LIFTGATE . . . . . . . . . . . . . . . . . . . . . . . . . 74 To Unlock/Open The Liftgate . . . . . . . . . . . 74 To Lock/Close The Liftgate . . . . . . . . . . . . 75 Adjustable Power Liftgate Height . . . . . . . . . 75 Hands-Free Liftgate — If Equipped . . . . . . . . 76 Cargo Area Features . . . . . . . . . . . . . . . . 77
ROOF LUGGAGE RACK — IF EQUIPPED . . . . . . . . 79
GETTING TO KNOW YOUR INSTRUMENT PANEL
DIGITAL INSTRUMENT CLUSTER . . . . . . . . . . . . 80 Digital Instrument Cluster Descriptions . . . . . 81
ANALOG INSTRUMENT CLUSTER . . . . . . . . . . . 82 Analog Instrument Cluster Descriptions . . . . . 83
INSTRUMENT CLUSTER DISPLAY . . . . . . . . . . . 83 Location And Controls . . . . . . . . . . . . . . . 83 Engine Oil Life Reset . . . . . . . . . . . . . . . . 85 Display And Messages . . . . . . . . . . . . . . . 86 Instrument Cluster Display Menu Items . . . . . 87 Head Up Display (HUD) — If Equipped . . . . . . 89 Battery Saver On/Battery Saver Mode Message — Electrical Load Reduction Actions — If Equipped . 90
WARNING LIGHTS AND MESSAGES . . . . . . . . . 90 Red Warning Lights . . . . . . . . . . . . . . . . . 91 Yellow Warning Lights . . . . . . . . . . . . . . . 93 Yellow Indicator Lights . . . . . . . . . . . . . . . 96 Green Indicator Lights . . . . . . . . . . . . . . . 96

3
White Indicator Lights . . . . . . . . . . . . . . . 97 Blue Indicator Lights . . . . . . . . . . . . . . . . 98 Gray Indicator Lights . . . . . . . . . . . . . . . . 98
ONBOARD DIAGNOSTIC SYSTEM — OBD II . . . . . . 98 Onboard Diagnostic System (OBD II) Cybersecurity . . . . . . . . . . . . . . . . . . . . 99
EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS . . . . . . . . . . . . . . . . . . . . . . . 99
STARTING AND OPERATING
STARTING THE ENGINE — GRAND CHEROKEE . . . 100 Automatic Transmission . . . . . . . . . . . . . 100 Keyless Enter n GoTM — Ignition . . . . . . . . 100 Normal Starting . . . . . . . . . . . . . . . . . 100 AutoPark . . . . . . . . . . . . . . . . . . . . . . 101 Extended Park Starting . . . . . . . . . . . . . . 102 If Engine Fails To Start . . . . . . . . . . . . . . 102 Cold Weather Operation (Below ­22°F Or -30°C) . . . . . . . . . . . . 102 After Starting . . . . . . . . . . . . . . . . . . . 103 ENGINE BREAK-IN RECOMMENDATIONS . . . . . . 103 PARKING BRAKE . . . . . . . . . . . . . . . . . . . 103 Electric Park Brake (EPB) . . . . . . . . . . . . 103 Auto Park Brake . . . . . . . . . . . . . . . . . . 104 SafeHold . . . . . . . . . . . . . . . . . . . . . . 104 HoldN Go — If Equipped . . . . . . . . . . . . 105 Brake Maintenance Mode . . . . . . . . . . . . 105
AUTOMATIC TRANSMISSION . . . . . . . . . . . . . 105 Ignition Park Interlock . . . . . . . . . . . . . . 106 Brake/Transmission Shift Interlock (BTSI) System . . . . . . . . . . . . . . . . . . . . . . . 106 8-Speed Automatic Transmission . . . . . . . . 106

4
SPORT MODE — IF EQUIPPED . . . . . . . . . . . . 109
FOUR-WHEEL DRIVE OPERATION . . . . . . . . . . 109 Quadra-Trac I Operating Instructions/ Precautions — If Equipped . . . . . . . . . . . . 110 Quadra- Trac II Operating Instructions/ Precautions — If Equipped . . . . . . . . . . . . 110 Shift Positions . . . . . . . . . . . . . . . . . . . 110 Shifting Procedures . . . . . . . . . . . . . . . . 110 Quadra-Trac II System — If Equipped . . . . . . 111 Electronic Sway Bar Disconnect — If Equipped . 111
SELEC-TERRAIN — IF EQUIPPED . . . . . . . . . . . 112 Selec-Terrain Mode Selection . . . . . . . . . . 112 Instrument Cluster Display Messages . . . . . 113
QUADRA-LIFT — IF EQUIPPED . . . . . . . . . . . . 113 Description . . . . . . . . . . . . . . . . . . . . 113 Air Suspension Modes . . . . . . . . . . . . . . 114 Instrument Cluster Display Messages . . . . . 115 Operation . . . . . . . . . . . . . . . . . . . . . 115
FUEL SAVER TECHNOLOGY 5.7L ONLY . . . . . . . 115 POWER STEERING . . . . . . . . . . . . . . . . . . 115 STOP/START SYSTEM — IF EQUIPPED . . . . . . . 116
Autostop Mode . . . . . . . . . . . . . . . . . . 116 Possible Reasons The Engine Does Not Autostop . . . . . . . . . . . . . . . . . . . . . . 116 To Start The Engine While In Autostop Mode . 116 To Manually Turn Off The Stop/Start System . 117 To Manually Turn On The Stop/Start System . . 117 System Malfunction . . . . . . . . . . . . . . . . 117 CRUISE CONTROL SYSTEMS . . . . . . . . . . . . . 117 Adaptive Cruise Control (ACC) . . . . . . . . . . 117 TRAFFIC SIGN ASSIST SYSTEM — IF EQUIPPED . . 124 Activation/Deactivation . . . . . . . . . . . . . 124 Traffic Sign Assist Modes . . . . . . . . . . . . 124 Indications On The Display . . . . . . . . . . . . 124

ACTIVE DRIVING ASSIST SYSTEM — IF EQUIPPED . 125 Operation . . . . . . . . . . . . . . . . . . . . . 125 Turning Active Driving Assist On Or Off . . . . . 127 Indications On The Display . . . . . . . . . . . . 128 System Status . . . . . . . . . . . . . . . . . . . 129 System Operation/Limitations . . . . . . . . . . 129
PARKSENSE FRONT/REAR PARK ASSIST SYSTEM — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . 130
ParkSense Sensors . . . . . . . . . . . . . . . . 131 ParkSense Display . . . . . . . . . . . . . . . . 131 ParkSense Warning Display . . . . . . . . . . . 134 Enabling And Disabling ParkSense . . . . . . . 134 Service The ParkSense Park Assist System . . 134 Cleaning The ParkSense System . . . . . . . . 134 ParkSense System Usage Precautions . . . . . 135 Side Distance Warning System . . . . . . . . . 135
PARKSENSE ACTIVE PARK ASSIST SYSTEM — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . 137
Enabling And Disabling The ParkSense Active Park Assist System . . . . . . . . . . . . . . . . 137 Parallel/Perpendicular Parking Space Assistance Operation . . . . . . . . . . . . . . . 138 Exiting The Parking Space . . . . . . . . . . . . 140
ACTIVE LANE MANAGEMENT SYSTEM — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . 140
Active Lane Management Operation . . . . . . 140 Turning Active Lane Management On Or Off . . 141 Active Lane Management Warning Message . 141 Changing Active Lane Management Status . . 143
PARKVIEW REAR BACK UP CAMERA . . . . . . . . 143 Zoom View . . . . . . . . . . . . . . . . . . . . . 144 Viewing At Speed . . . . . . . . . . . . . . . . . 144
TRAILCAM SYSTEM — IF EQUIPPED . . . . . . . . . 144

FAMCAM SYSTEM — IF EQUIPPED . . . . . . . . . . 145
NIGHT VISION CAMERA SYSTEM — IF EQUIPPED . 145 Detection Range . . . . . . . . . . . . . . . . . 147 Service The Night Vision System . . . . . . . . 147 Night Vision System Limitations . . . . . . . . . 148
SURROUND VIEW CAMERA SYSTEM — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . 148
Zoom View . . . . . . . . . . . . . . . . . . . . . 150
REFUELING THE VEHICLE . . . . . . . . . . . . . . . 150
VEHICLE LOADING . . . . . . . . . . . . . . . . . . . 151 Gross Vehicle Weight Rating (GVWR) . . . . . . 151 Payload . . . . . . . . . . . . . . . . . . . . . . . 151 Gross Axle Weight Rating (GAWR) . . . . . . . . 151 Tire Size . . . . . . . . . . . . . . . . . . . . . . 151 Rim Size . . . . . . . . . . . . . . . . . . . . . . 151 Inflation Pressure . . . . . . . . . . . . . . . . . 151 Curb Weight . . . . . . . . . . . . . . . . . . . . 151 Loading . . . . . . . . . . . . . . . . . . . . . . . 151
TRAILER TOWING . . . . . . . . . . . . . . . . . . . 152 Common Towing Definitions . . . . . . . . . . . 152 Trailer Hitch Classification . . . . . . . . . . . . 154 Trailer Towing Weights (Maximum Trailer Weight Ratings) . . . . . . . 154 Trailer Hitch Receiver Cover Removal — If Equipped . . . . . . . . . . . . . . . . . . . . 156 Trailer And Tongue Weight . . . . . . . . . . . . 156 Towing Requirements . . . . . . . . . . . . . . 156 Towing Tips . . . . . . . . . . . . . . . . . . . . 158
RECREATIONAL TOWING (BEHIND MOTORHOME) . . . . . . . . . . . . . . . 159
Towing This Vehicle Behind Another Vehicle . 159 Recreational Towing — Two- Wheel Drive Models . . . . . . . . . . . . . . . . . . . . . . . 159

Recreational Towing — Quadra-Trac I (Single-Speed Transfer Case without 4WD LOW Range) Four-Wheel Drive Models . . . . . . . . 160 Recreational Towing — Quadra­Trac II with 4WD LOW Range . . . . . . . . . . . . . . . . . . . . 160
DRIVING TIPS . . . . . . . . . . . . . . . . . . . . . 162 On-Road Driving Tips . . . . . . . . . . . . . . . 162 Off-Road Driving Tips . . . . . . . . . . . . . . . 162
MULTIMEDIA
UCONNECT SYSTEMS . . . . . . . . . . . . . . . . . 165 CYBERSECURITY . . . . . . . . . . . . . . . . . . . 165 UCONNECT SETTINGS . . . . . . . . . . . . . . . . . 165
Customer Programmable Features . . . . . . . 165
STEERING WHEEL AUDIO CONTROLS . . . . . . . . 184 Radio Operation . . . . . . . . . . . . . . . . . . 185 Media Mode . . . . . . . . . . . . . . . . . . . . 185
PASSENGER SCREEN — IF EQUIPPED . . . . . . . 185 Passenger Screen Permissions . . . . . . . . . 185 Home Screen . . . . . . . . . . . . . . . . . . . 185 Audio And Video . . . . . . . . . . . . . . . . . . 187 Rear Seat Entertainment With Amazon Fire TV Built-In — If Equipped . . . . . . . . . . . . . . . 188 HDMI Projecting . . . . . . . . . . . . . . . . . . 188 Device Manager . . . . . . . . . . . . . . . . . . 188 Navigation . . . . . . . . . . . . . . . . . . . . . 188 Camera . . . . . . . . . . . . . . . . . . . . . . . 189
3RD PARTY APPS . . . . . . . . . . . . . . . . . . . 189 REAR SEAT ENTERTAINMENT (RSE) WITH AMAZON FIRE TV BUILT-IN — IF EQUIPPED . . . . . . . . . . 190
Overview . . . . . . . . . . . . . . . . . . . . . . 190 Getting Started . . . . . . . . . . . . . . . . . . 191

Accessing Rear Seat Entertainment with Fire TV built-in from the Front Radio Screen . . . . . . 191 Accessing Rear Seat Entertainment with Fire TV built-in from the Rear Screens . . . . . . . . . . 191 Accessing Rear Seat Entertainment with Fire TV built-in from the Passenger Screen — If Equipped . . . . . . . . . . . . . . . . . . . . . 191 First Time Starting Up (Using the Rear Screens) . . . . . . . . . . . . . . . . . . . . . . 191 Alexa Voice Control . . . . . . . . . . . . . . . . 192 Listen Via Vehicle Speakers . . . . . . . . . . . 192 Quick Menu . . . . . . . . . . . . . . . . . . . . 192 Parental Controls (Using the Rear Screens) . . 192 Voice Remote with Alexa Pairing (Using the Rear Screens) . . . . . . . . . . . . . 193 Media Sources Input (Using the Front Radio and Rear Screens) . . . 193 Voice Remote with Alexa . . . . . . . . . . . . . 193 Replacing the Voice Remote with Alexa Batteries . . . . . . . . . . . . . . . . . . . . . . 194 Rear Seat Entertainment with Fire TV built-in streaming (Using the Front Radio and Rear Screens) . . . 194 Fire TV Apps/Games (Using the Rear Screens) . . . . . . . . . . . . . 195 Are We There Yet? . . . . . . . . . . . . . . . . 195 Using The Video USB Port . . . . . . . . . . . . 195 Play Video Games . . . . . . . . . . . . . . . . . 196 Headphones Operation . . . . . . . . . . . . . . 196 Rear Climate Controls . . . . . . . . . . . . . . 196 Legal & Compliance . . . . . . . . . . . . . . . 198

5
OFF-ROAD PAGES — IF EQUIPPED . . . . . . . . . . 198 Off-Road Pages Status Bar . . . . . . . . . . . 198 Vehicle Dynamics . . . . . . . . . . . . . . . . 199 Accessory Gauges . . . . . . . . . . . . . . . . 199 Pitch & Roll . . . . . . . . . . . . . . . . . . . . 200 Selec-Terrain — If Equipped . . . . . . . . . . . 200 Suspension — If Equipped . . . . . . . . . . . . 200 Trail Recording — If Equipped . . . . . . . . . . 200
ADVENTURE GUIDES — IF EQUIPPED . . . . . . . . 202 RADIO OPERATION AND MOBILE PHONES . . . . . 204
Regulatory And Safety Information . . . . . . . 204
SAFETY
SAFETY FEATURES. . . . . . . . . . . . . . . . . . . 205 Anti-Lock Brake System (ABS) . . . . . . . . . 205 Drowsy Driver Detection (DDD) — If Equipped . 205 Rear Seat Reminder Alert (RSRA) . . . . . . . 206 Electronic Brake Control (EBC) System . . . . 206
AUXILIARY DRIVING SYSTEMS . . . . . . . . . . . . 212 Blind Spot Monitoring (BSM) . . . . . . . . . . . 212 Forward Collision Warning (FCW) With Mitigation . . . . . . . . . . . . . . . . . . . . . 215 Tire Pressure Monitoring System (TPMS) . . . 218
OCCUPANT RESTRAINT SYSTEMS . . . . . . . . . . 222 Occupant Restraint Systems Features . . . . . 222 Important Safety Precautions . . . . . . . . . . 222 Seat Belt Systems . . . . . . . . . . . . . . . . 222 Supplemental Restraint Systems (SRS) . . . . 228 Child Restraints . . . . . . . . . . . . . . . . . . 237
SAFETY TIPS . . . . . . . . . . . . . . . . . . . . . . 248 Transporting Passengers . . . . . . . . . . . . . 248 Transporting Pets . . . . . . . . . . . . . . . . . 248 Connected Vehicles . . . . . . . . . . . . . . . . 249

6
Safety Checks You Should Make Inside The Vehicle . . . . . . . . . . . . . . . . . . . . . . . 249 Periodic Safety Checks You Should Make Outside The Vehicle . . . . . . . . . . . . . . . 250 Exhaust Gas . . . . . . . . . . . . . . . . . . . 250 Carbon Monoxide Warnings . . . . . . . . . . . 251
IN CASE OF EMERGENCY
HAZARD WARNING FLASHERS . . . . . . . . . . . 252 ASSIST AND SOS SYSTEM — IF EQUIPPED . . . . . 252 JACKING AND TIRE CHANGING . . . . . . . . . . . 254
Preparations For Jacking . . . . . . . . . . . . 255 Jack Location . . . . . . . . . . . . . . . . . . . 255 Spare Tire Stowage . . . . . . . . . . . . . . . 257 Spare Tire Removal . . . . . . . . . . . . . . . . 257 Jacking Instructions . . . . . . . . . . . . . . . 259
JUMP STARTING . . . . . . . . . . . . . . . . . . . . 262 Preparations For Jump Start . . . . . . . . . . . 263 Jump Starting Procedure . . . . . . . . . . . . . 263
REFUELING IN EMERGENCY . . . . . . . . . . . . . 264 IF YOUR ENGINE OVERHEATS . . . . . . . . . . . . 265 MANUAL PARK RELEASE . . . . . . . . . . . . . . . 265 FREEING A STUCK VEHICLE . . . . . . . . . . . . . 266 TOWING A DISABLED VEHICLE . . . . . . . . . . . 267
Rear-Wheel Drive Models . . . . . . . . . . . . 268 Four-Wheel Drive Models . . . . . . . . . . . . 268 Emergency Tow Hooks — If Equipped . . . . . 269
ENHANCED ACCIDENT RESPONSE SYSTEM (EARS) . 269 EVENT DATA RECORDER (EDR) . . . . . . . . . . . 269

SERVICING AND MAINTENANCE
SCHEDULED SERVICING . . . . . . . . . . . . . . . 270 Maintenance Plan — Grand Cherokee . . . . . 270
ENGINE COMPARTMENT . . . . . . . . . . . . . . . 273 2.0L Engine . . . . . . . . . . . . . . . . . . . . 273 3.6L Engine . . . . . . . . . . . . . . . . . . . . 274 5.7L Engine . . . . . . . . . . . . . . . . . . . . 275 Checking Oil Level . . . . . . . . . . . . . . . . 276 Adding Washer Fluid . . . . . . . . . . . . . . . 276 Maintenance-Free Battery . . . . . . . . . . . . 276 Pressure Washing . . . . . . . . . . . . . . . . 277
VEHICLE MAINTENANCE . . . . . . . . . . . . . . . 277 Engine Oil . . . . . . . . . . . . . . . . . . . . . 277 Engine Oil Filter . . . . . . . . . . . . . . . . . . 278 Engine Air Cleaner Filter . . . . . . . . . . . . . 278 Air Conditioner Maintenance . . . . . . . . . . 278 Accessory Drive Belt Inspection . . . . . . . . 280 Body Lubrication . . . . . . . . . . . . . . . . . 281 Windshield Wiper Blades . . . . . . . . . . . . 281 Exhaust System . . . . . . . . . . . . . . . . . 283 Cooling System . . . . . . . . . . . . . . . . . . 283 Brake System . . . . . . . . . . . . . . . . . . . 286 Automatic Transmission . . . . . . . . . . . . . 287 Front/Rear Axle Fluid . . . . . . . . . . . . . . 287 Transfer Case . . . . . . . . . . . . . . . . . . . 288 Fuses . . . . . . . . . . . . . . . . . . . . . . . 288 Bulb Replacement . . . . . . . . . . . . . . . . 303
TIRES . . . . . . . . . . . . . . . . . . . . . . . . . . 303 Tire Safety Information . . . . . . . . . . . . . 303 Tires — General Information . . . . . . . . . . . 309 Tire Types . . . . . . . . . . . . . . . . . . . . . 312 Spare Tires — If Equipped . . . . . . . . . . . . 312 Wheel And Wheel Trim Care . . . . . . . . . . . 313

Snow Traction Devices . . . . . . . . . . . . . . 314 Tire Rotation Recommendations . . . . . . . . 315
DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES . . . . . . . . . . . . . . . . . . . 316
Treadwear . . . . . . . . . . . . . . . . . . . . . 316 Traction Grades . . . . . . . . . . . . . . . . . . 316 Temperature Grades . . . . . . . . . . . . . . . 316
STORING THE VEHICLE — GRAND CHEROKEE . . . 317 BODYWORK . . . . . . . . . . . . . . . . . . . . . . 317
Protection From Atmospheric Agents . . . . . . 317 Body And Underbody Maintenance . . . . . . . 317 Preserving The Bodywork . . . . . . . . . . . . 317
INTERIORS . . . . . . . . . . . . . . . . . . . . . . . 318 Seats And Fabric Parts . . . . . . . . . . . . . . 318 Plastic And Coated Parts . . . . . . . . . . . . . 318 Leather Surfaces . . . . . . . . . . . . . . . . . 318 Glass Surfaces . . . . . . . . . . . . . . . . . . 319
TECHNICAL SPECIFICATIONS
VEHICLE IDENTIFICATION NUMBER (VIN) . . . . . . 320 BRAKE SYSTEM . . . . . . . . . . . . . . . . . . . . 320 WHEEL AND TIRE TORQUE SPECIFICATIONS . . . 320
Torque Specifications . . . . . . . . . . . . . . . 320
FUEL REQUIREMENTS . . . . . . . . . . . . . . . . 321 2.0L Engine — Grand Cherokee . . . . . . . . . 321 3.6L Engine . . . . . . . . . . . . . . . . . . . . 321 5.7L Engine . . . . . . . . . . . . . . . . . . . . 321 Reformulated Gasoline . . . . . . . . . . . . . 321 Materials Added To Fuel . . . . . . . . . . . . . 321 Gasoline/Oxygenate Blends . . . . . . . . . . 322 Do Not Use E-85 In Non-Flex Fuel Vehicles . . 322 CNG And LP Fuel System Modifications . . . . 322

7

Methylcyclopentadienyl Manganese Tricarbonyl (MMT) In Gasoline . . . . . . . . . . . . . . . . 322 Fuel System Cautions . . . . . . . . . . . . . . 322
FLUID CAPACITIES — GRAND CHEROKEE . . . . . 323 ENGINE FLUIDS AND LUBRICANTS — GRAND CHEROKEE . . . . . . . . . . . . . . . . . . . . . . . 324 ENGINE FLUIDS AND LUBRICANTS — GRAND CHEROKEE 4XE . . . . . . . . . . . . . . . . . . . . 325 CHASSIS FLUIDS AND LUBRICANTS . . . . . . . . 325
CUSTOMER ASSISTANCE
SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE . . . . . . . . . . . . . . . . . . . . . . . . 326
Prepare For The Appointment . . . . . . . . . . 326 Prepare A List . . . . . . . . . . . . . . . . . . . 326 Be Reasonable With Requests . . . . . . . . . 326
IF YOU NEED ASSISTANCE . . . . . . . . . . . . . . 326 Roadside Assistance . . . . . . . . . . . . . . . 326 FCA US LLC Customer Center . . . . . . . . . . 327 FCA Canada Customer Care . . . . . . . . . . . 327 Mexico . . . . . . . . . . . . . . . . . . . . . . . 327 Puerto Rico And US Virgin Islands . . . . . . . . 327 Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) . . . . . . . . . . . 327 Service Contract . . . . . . . . . . . . . . . . . 327
WARRANTY INFORMATION . . . . . . . . . . . . . . 328 MOPAR® PARTS . . . . . . . . . . . . . . . . . . . 328 REPORTING SAFETY DEFECTS . . . . . . . . . . . . 328
In The 50 United States And Washington, D.C. . . . . . . . . . . . . . . . . . 328 In Canada . . . . . . . . . . . . . . . . . . . . . 328

PUBLICATION ORDER FORMS . . . . . . . . . . . . 329 Change Of Ownership Or Address . . . . . . . . . . 329 GENERAL INFORMATION . . . . . . . . . . . . . . . 329

8
INTRODUCTION
Dear Customer, Congratulations on the purchase of your new Jeep® vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality. The all-new Jeep® Grand Cherokee/Grand Cherokee L continues to build on its proud legacy as the most celebrated SUV ever, while raising the bar in luxury and performance. With legendary 4×4 capability, this vehicle breaks new ground in exceptional performance, comfort, and functionality. We have improved on-road refinement and premium styling and craftsmanship inside and out. With an unsurpassed blend of refined sophistication, dynamic performance, cutting edge technologies, and levels of elegance, the new Jeep® Grand Cherokee/Grand Cherokee L carries an attractive presence and capability that is uncommon in its class, unquestionably Jeep® brand, and unmistakably world class. The all-new Jeep® Grand Cherokee/Grand Cherokee L is a specialized utility vehicle and can go places and perform tasks that are not intended for conventional passenger vehicles. It handles and maneuvers differently from many passenger vehicles both on-road and off-road, so take time to become familiar with your vehicle. If equipped, the twowheel drive version of this vehicle was designed for on-road use only. It is not intended for off-road driving or use in other severe conditions suited for a four-wheel drive vehicle. Be sure you are familiar with all vehicle controls, particularly those used for braking, steering, transmission, and transfer case shifting. Always observe federal, state, provincial and local laws wherever you drive. As with other vehicles of this type, failure to operate this vehicle correctly may result in loss of control or a collision page 162. Please take the time to read all of these publications carefully before driving your vehicle for the first time. Following the instructions, recommendations, tips, and important warnings in this manual will help ensure safe and enjoyable operation of your vehicle. This Owner’s Manual describes all versions of this vehicle. Options and equipment dedicated to specific markets or versions are not expressly indicated in the text. Therefore, you should only consider the information that is related to the trim level, engine, and version that you have purchased. Any content introduced throughout the Owner’s Information, which may or may not be applicable to your vehicle, will be identified with the wording “If Equipped”. All data contained in this publication are intended to help you use your vehicle in the best possible way. FCA US LLC aims at a constant improvement of the vehicles produced. For this reason, it reserves the right to make changes to the model described for technical and/or commercial reasons. For further information, contact an authorized dealer. When it comes to service, remember that authorized dealers know your Jeep® best, have factory-trained technicians, genuine Mopar® parts, and care about your satisfaction.

SYMBOLS KEY
WARNING! CAUTION! NOTE: TIP: PAGE REFERENCE ARROW

These statements apply to operating procedures that could result in a collision, bodily injury and/or death.
These statements apply to procedures that could result in damage to your vehicle.
A suggestion which will improve installation, operation, and reliability. If not followed, may result in damage.
General ideas/solutions/suggestions on easier use of the product or functionality.
Follow this reference for additional information on a particular feature.

INTRODUCTION 9
ROLLOVER WARNING
Utility vehicles have a significantly higher rollover rate than other types of vehicles. This 1
vehicle has a higher ground clearance and a higher center of gravity than many passenger vehicles. It is capable of performing better in a wide variety of off-road applications. Driven in an unsafe manner, all vehicles can go out of control. Because of the higher center of gravity, if this vehicle is out of control, it may roll over while some other vehicles may not.
Do not attempt sharp turns, abrupt maneuvers, or other unsafe driving actions that can cause loss of vehicle control. Failure to operate this vehicle safely may result in a collision, rollover of the vehicle, and severe or fatal injury. Drive carefully.

FOOTNOTE

Supplementary and relevant information pertaining to the topic.

Rollover Warning Label

If you do not read the entire Owner’s Manual, you may miss important information. Observe all Cautions and Warnings.

Failure to use the driver and passenger seat belts provided is a major cause of severe or fatal injury. In fact, the US government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year and could reduce disabling injuries by two million annually. In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Always buckle up.

10 INTRODUCTION
VEHICLE MODIFICATIONS/ALTERATIONS
WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death.
SYMBOL GLOSSARY
Some car components have colored labels with symbols indicating precautions to be observed when using this component. It is important to follow all warnings when operating your vehicle. See below for the definition of each symbol page 90. NOTE: Warning and Indicator lights are different based upon equipment options and current vehicle status. Some telltales are optional and may not appear.
Red Warning Lights
Active Driving Assist – Driver Inattentiveness Warning Light page 91
Air Bag Warning Light page 91
Brake Warning Light page 91

Red Warning Lights Battery Charge Warning Light page 91
Door Open Warning Light page 91
Electric Power Steering (EPS) Fault Warning Light page 91
Electronic Throttle Control (ETC) Warning Light page 92
Engine Coolant Temperature Warning Light page 92
Hood Open Warning Light page 92

Red Warning Lights Liftgate Open Warning Light page 92
Night Vision Animal Warning Light page 92
Night Vision Pedestrian Warning Light page 92
Oil Pressure Warning Light page 92
Oil Temperature Warning Light page 92
Rear Seat Belt Reminder Warning Light page 93

INTRODUCTION 11 Red Warning Lights
1
Seat Belt Reminder Warning Light page 93
Transmission Temperature Warning Light page 93
Vehicle Security Warning Light page 93
Yellow Warning Lights
Active Driving Assist – Driver Inattentiveness Warning Light page 93
Active Driving Assist Fault Warning Light page 93
Active Lane Management Warning Light page 94

12 INTRODUCTION

Yellow Warning Lights
Air Suspension Fault Warning Light page 93

Anti-Lock Brake System (ABS) Warning Light page 93

Electric Park Brake Fault Warning Light page 93

Electronic Stability Control (ESC) Active Warning Light page 93

Electronic Stability Control (ESC) OFF Warning Light page 94

Engine Check/Malfunction Indicator Warning Light (MIL) page 94

Yellow Warning Lights Fuel Level Sensor Failure Warning Light
page 94
Low Fuel Warning Light page 94
Low Washer Fluid Warning Light page 94
Night Vision Animal Warning Light page 92
Night Vision Pedestrian Warning Light page 92
Service 4WD Warning Light page 95

Yellow Warning Lights
Service Active Lane Management Warning Light page 94
Service Adaptive Cruise Control (ACC) Warning Light page 95
Service Forward Collision Warning (FCW) Or Pedestrian Emergency Braking (PEB) Warning Light page 95
Service Stop/Start System Warning Light page 95
Sway Bar Fault Warning Light page 95
Tire Pressure Monitoring System (TPMS) Warning Light page 95

INTRODUCTION 13 Yellow Indicator Lights
1
4WD Low Indicator Light page 96
Air Suspension Active Indicator Light page 96
Air Suspension Aerodynamic Height Indicator Light page 96
Air Suspension Entry/Exit Indicator Light page 96
Air Suspension Off-Road 1 Indicator Light page 96
Air Suspension Off-Road 2 Indicator Light page 96

14 INTRODUCTION

Yellow Indicator Lights
Auto HOLD! Fault Indicator Light page 96

Forward Collision Warning (FCW) Or Pedestrian Emergency Braking (PEB) OFF Indicator Light page 96

Max Payload Exceeded Indicator Light page 96

NEUTRAL Indicator Light page 96

Sway Bar Indicator Light page 96
Green Indicator Lights
Active Driving Assist – Driver Attentive Indicator Light page 96

Green Indicator Lights
Active Lane Management Indicator Light page 97
Adaptive Cruise Control (ACC) Set With Target Indicator Light page 97
Adaptive Cruise Control (ACC) Set With No Target Detected Indicator Light page 97
Auto HOLD Indicator Light page 97
Cruise Control SET Indicator Light page 97
Front Fog Indicator Light page 97

Green Indicator Lights Night Vision Active Indicator Light page 97
Parking/Headlights On Indicator Light page 97
Rear Seat Belt Fastened Indicator Light page 97
Selec-Speed Control Indicator Light page 98
Sport Mode Indicator Light page 97
Stop/Start Active Indicator Light page 97

INTRODUCTION 15 Green Indicator Lights
1
Turn Signal/Hazard Indicator Lights page 97
White Indicator Lights
Active Driving Assist On Indicator Light page 97
Adaptive Cruise Control (ACC) Ready Indicator Light page 98
Cruise Control Ready Indicator Light page 98
Hill Descent Control (HDC) Indicator Light page 98
Rear Seat Unoccupied Indicator Light page 98

16 INTRODUCTION

Blue Indicator Lights
High Beam Indicator Light page 98

Gray Indicator Lights
Night Vision Suppressed Indicator Light page 98

17
GETTING TO KNOW YOUR VEHICLE

KEYS
KEY FOB
Your vehicle is equipped with a key fob which supports Passive Entry, Remote Keyless Entry (RKE), Keyless Enter `n GoTM (if equipped), Remote Start (if equipped), and remote power liftgate (if equipped) operation. The key fob allows you to lock or unlock all doors and liftgate, as well as activate the Panic Alarm from distances up to approximately 66 ft (20 m). The key fob does not need to be pointed at the vehicle to activate the system. The key fob also contains an emergency key, which is stored in the rear of the key fob.
NOTE: In vehicles equipped with Remote Start, the key fob will operate at distances up to 328 ft (100 m).
NOTE:
· The key fob’s wireless signal may be blocked if the key fob is located next to a mobile phone, laptop, or other electronic device. This may result in poor performance.
· If your vehicle is equipped with a Wireless Charging Pad, the key fob may not be detected if it is placed within 6 inches (15 cm) of the pad page 68.
· With the ignition in the ON position and the vehicle moving at 2 mph (4 km/h), all RKE commands are disabled.

Key Fob
1 — LED Indicator 2 — Unlock 3 — Lock 4 — Remote Start 5 — Power Liftgate 6 — Panic 7 — Emergency Key
In case the ignition switch does not change positions with the push of a button, the key fob may have a low or fully depleted battery. A low key fob battery can be verified by referring to the instrument cluster, which will display directions to follow. For more information on ignition positions, see
page 20.

NOTE:

A low key fob battery condition may be indicated by a message in the instrument cluster display, or by the

2

LED light on the key fob. If the LED key fob light no lon-

ger illuminates after a key fob button is pushed, then

the key fob battery requires replacement page 329.

To Lock/Unlock The Doors And Liftgate
Push and release the unlock button on the key fob once to unlock the driver’s door, or twice within five seconds to unlock all the doors and the liftgate. To lock all the doors and the liftgate, push the lock button once.
If enabled within the Uconnect system, the turn signals will flash and other illuminated entry features will be activated when the doors are unlocked. When the doors are locked, the turn signals will flash and the horn will chirp.

NOTE:
· If the vehicle is equipped with the Auto Relock feature, and is unlocked with the key fob, and no door is opened within 60 seconds, the vehicle will relock and the Vehicle Security system will arm (if equipped). This feature can be enabled/disabled within Uconnect Settings.
· If one or more doors are open, or the liftgate is open, the doors will lock. The doors will unlock again automatically if the key fob is left inside the passenger compartment, otherwise the doors will stay locked.
All doors can be programmed to unlock on the first push of the unlock button through Uconnect Settings
page 165.

18 GETTING TO KNOW YOUR VEHICLE
Using The Panic Feature
To turn the Panic feature on or off, push the Panic button on the key fob. When the Panic feature is activated, the turn signals will flash, the horn may pulse on and off (if equipped with horn alarm), and the interior lights will turn on. The Panic feature will stay on for three minutes unless you turn it off by either pushing the Panic button a second time or drive the vehicle at a speed of 15 mph (24 km/h) or greater.
NOTE:
· The interior lights will turn off if you place the ignition in the ON/RUN position while the Panic feature is activated. However, the exterior lights and horn (if equipped with horn alarm) will remain on.
· You may need to be closer than 66 ft (20 m) from the vehicle when using the key fob to turn off the Panic feature due to the radio frequency noises emitted by the system.
Key Left Vehicle Feature
If a valid key fob is no longer detected inside the vehicle while the vehicle’s ignition system is in the ON/RUN or START position, the message “Key Fob Has Left The Vehicle” will be shown in the instrument cluster display along with an interior chime. An exterior audible and visual alert will also be activated to warn the driver. The vehicle’s horn will rapidly chirp three times along with a single flash of the vehicle’s exterior lights.

NOTE:
· The doors have to be open and then closed in order for the vehicle to check for the presence of a key fob; the Key Left Vehicle feature will not activate until all of the doors are closed.
· These alerts will not be activated in situations where the vehicle’s engine is left running with the key fob inside.
Using The Key Fob To Open Vehicle Windows — If Equipped
From outside of the vehicle, push and release the unlock button on the key fob, and within five seconds push and hold the unlock button for up to seven seconds. All vehicle door windows will open.
NOTE:
· This feature is enabled through Uconnect Settings page 165.
· Vehicle must be equipped with front and rear auto up/down windows.
Replacing The Battery In The Key Fob
The replacement battery model is one CR2450 battery.
NOTE:
· Customers are recommended to use a battery obtained from Mopar®. Aftermarket coin battery specifications may not meet the original OEM coin battery specifications.

· Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further information.
· Do not touch the battery terminals that are on the back housing or the printed circuit board.
· Do not replace the coin battery if the LED on the key fob above the top row buttons blinks when a button is pressed. The coin battery should last a minimum of three years with normal vehicle usage. 1. Remove the emergency key (2) by pushing the emer-
gency key release button (1) on the side of the key fob, and pulling the emergency key out with the other hand.
Emergency Key Removal 1 — Emergency Key Release Button 2 — Emergency Key

3. Next, locate the gap on the right side of the key fob, which is positioned farther to the edge than the left side gap. Pry open the right side, and remove the back cover.
4. Remove the battery by using your thumb to slide the battery downward and back toward the key ring.

GETTING TO KNOW YOUR VEHICLE 19

NOTE:

When replacing the battery, ensure the (+) sign on

the battery is facing upward. Avoid touching the new

battery with your fingers. Skin oils may cause bat-

tery deterioration. If you touch a battery, clean it

with rubbing alcohol.

2

5. Replace the battery by using your thumb to push

down and slide the battery under the small lip on

the top edge of the opening.

Emergency Key Removed 2. Hold the key fob with the button side facing down,
and locate the small rectangular gap on the left side between the housing and the back cover of the key fob. Use a small flat-bladed tool to pry apart the two halves of the key fob. Make sure not to damage the seal during removal.
Pry Apart Key Fob Halves

Key Fob Battery Location NOTE: You can also insert a screwdriver or similar tool into the battery removal pocket to pry the battery out.
Battery Removal Pocket

Key Fob Battery Replacement
6. To assemble the key fob case, line up the top edge of the back cover with the top of the fob, and press the edges into the interlocking hinges until all edges snap together with no large visual gaps.
7. Reinsert the emergency key until it locks into place.
NOTE: The key fob battery should only be replaced by qualified technicians. If the battery requires replacement, see an authorized dealer.

20 GETTING TO KNOW YOUR VEHICLE
WARNING!
· The integrated key fob contains a coin cell battery. Do not ingest the battery; there is a chemical burn hazard. If the coin cell battery is swallowed, it can cause severe internal burns in just two hours and can lead to death.
· If you think a battery may have been swallowed or placed inside any part of the body, seek immediate medical attention.
· Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
Programming And Requesting Additional Key Fobs
Programming the key fob may be performed by an authorized dealer.
NOTE:
· Once a key fob is programmed to a vehicle, it cannot be repurposed and reprogrammed to another vehicle.
· Only key fobs that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a key fob is programmed to a vehicle, it cannot be programmed to any other vehicle.
WARNING!
· Always remove the key fobs from the vehicle and lock all doors when leaving the vehicle unattended. (Continued)

WARNING!
· Always remember to place the Keyless Enter `n GoTM Ignition in the OFF position when exiting the vehicle.
Duplication of key fobs may be performed at an authorized dealer. This procedure consists of programming a blank key fob to the vehicle electronics. A blank key fob is one that has never been programmed.
NOTE:
· When having the Sentry Key Immobilizer system serviced, bring all vehicle keys with you to an authorized dealer.
· Keys must be ordered to the correct key cut to match the vehicle locks.
SENTRY KEY
The Sentry Key Immobilizer system prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked. The system uses a key fob, keyless push button ignition and a Radio Frequency (RF) receiver to prevent unauthorized vehicle operation. Therefore, only key fobs that are programmed to the vehicle can be used to start and operate the vehicle. The system cannot reprogram a key fob obtained from another vehicle. After placing the ignition in the ON/RUN position, the Vehicle Security Light will turn on for three seconds for a bulb check. If the light remains on after the bulb check, it indicates that there is a problem with the electronics. In addition, if the light begins to flash after the

bulb check, it indicates that someone attempted to start the engine with an invalid key fob. In the event that a valid key fob is used to start the engine but there is an issue with the vehicle electronics, the engine will start and shut off after two seconds. If the Vehicle Security Light turns on during normal vehicle operation (vehicle running for longer than 10 seconds), it indicates that there is a fault in the electronics. Should this occur, have the vehicle serviced as soon as possible by an authorized dealer.
CAUTION!
The Sentry Key Immobilizer system is not compatible with some aftermarket Remote Start systems. Use of these systems may result in vehicle starting problems and loss of security protection.
All of the key fobs provided with your new vehicle have been programmed to the vehicle electronics
page 329.
NOTE: A key fob that has not been programmed is also considered an invalid key.
IGNITION SWITCH
KEYLESS ENTER `N GOTM IGNITION
This feature allows the driver to operate the ignition switch with the push of a button as long as the key fob is in the passenger compartment. The START/STOP ignition button has several operating modes that are labeled and will illuminate when in position. These modes are OFF, ON/RUN, and START.

Detected”, the key fob may have a low or depleted battery. In this situation, a backup method can be used to operate the ignition switch. Put the nose side of the key fob (side opposite of the emergency key) against the START/STOP ignition button and push to operate the ignition switch.
· Replacement of the key fob battery is recommended.

GETTING TO KNOW YOUR VEHICLE 21

WARNING!

· Do not leave the key fob in or near the vehicle, or

in a location accessible to children, and do not

leave Keyless Enter `n GoTM Ignition in the ON/RUN

position. A child could operate power windows,

2

other controls, or move the vehicle.

· Do not leave children or animals inside parked

vehicles in hot weather. Interior heat buildup may

cause serious injury or death.

START/STOP Ignition Button
1 — OFF 2 — ON/RUN
The push button ignition can be placed in the following modes: OFF
· The engine is stopped · Some electrical devices (e.g. power locks, alarm,
etc.) are still available ON/RUN
· Driving position · All electrical devices are available (e.g. climate con-
trols, heated seats, etc.) START
· The engine will start (when foot is on the brake pedal)
NOTE:
· If the ignition position does not change with a push of the ignition button, and the instrument cluster displays a message such as “Key Fob Not

Depleted Key Fob Battery Procedure
WARNING!
· When exiting the vehicle, always place the ignition in the OFF position, remove the key fob from the vehicle, and lock your vehicle.
· Never leave children alone in a vehicle, or with access to an unlocked vehicle.
· Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the gear selector. (Continued)

CAUTION!
An unlocked vehicle is an invitation for thieves. Always remove key fob from the vehicle and lock all doors when leaving the vehicle unattended.
NOTE:
· The key fob may not be detected by the vehicle Keyless Enter n GoTM system if it is located next to a mobile phone, laptop or other electronic device, or in the cupholders near aluminum cans; these devices may block the key fob’s wireless signal and prevent the Keyless Entern GoTM system from starting the vehicle.
· For more information on the engine starting procedure, see page 100.
· When opening the driver’s door and the ignition is in the ON/RUN position (engine not running), a chime will sound to remind you to place the ignition in the OFF position. In addition to the chime, the message “Ignition ON” will display in the cluster.

22 GETTING TO KNOW YOUR VEHICLE
REMOTE START — IF EQUIPPED
This system uses the key fob to start the engine conveniently from outside the vehicle while still maintaining security. The system has a range of approximately 328 ft (100 m). Remote Start is used to defrost windows in cold weather, and to reach a comfortable climate in all ambient conditions before the driver enters the vehicle.
NOTE: Obstructions between the vehicle and key fob may reduce this range page 329.
WARNING!
· Do not start or run an engine in a closed garage or confined area. Exhaust gas contains carbon monoxide which is odorless and colorless. Carbon monoxide is poisonous and can cause serious injury or death when inhaled.
· Keep key fobs away from children. Operation of the Remote Start system, windows, door locks or other controls could cause serious injury or death.
HOW TO USE REMOTE START
Push and release the Remote Start button on the key fob twice within five seconds. The vehicle doors will lock, the parking lights will flash, and the horn will chirp twice (if programmed). Then, the engine will start, and the vehicle will remain in the Remote Start mode for a 15 minute cycle. Pushing the Remote Start button a third time shuts the engine off.

NOTE:
· If the Remote Start button on the key fob is pushed too rapidly during activation, the vehicle may not start.
· With Remote Start, the engine will only run for 15 minutes.
· Remote Start can only be used twice. · If an engine fault is present or fuel level is low, the
vehicle will start and then shut down in 10 seconds.
· The parking lights will turn on and remain on during Remote Start mode.
· Headlight animation (if equipped) will occur when Remote Start is activated, if “Headlight Illumination On Approach” is enabled within Uconnect Settings.
· For security, power window and power sunroof operation (if equipped) are disabled when the vehicle is in the Remote Start mode.
· The ignition must be placed in the ON/RUN position before the Remote Start sequence can be repeated for a third cycle. All of the following conditions must be met before the engine will remote start:
· Gear selector in PARK · Doors closed · Hood closed · Liftgate closed · Hazard switch off · Brake switch inactive (brake pedal not pressed) · Battery at an acceptable charge level · System not disabled from previous Remote Start
event

· Vehicle Security Light is flashing · Ignition in OFF position · Fuel level meets minimum requirement · Vehicle Security system is not signaling an intrusion · Malfunction Indicator Light is not illuminated
WARNING!
· Do not start or run an engine in a closed garage or confined area. Exhaust gas contains carbon monoxide (CO) which is odorless and colorless. Carbon monoxide is poisonous and can cause serious injury or death when inhaled.
· Keep key fobs away from children. Operation of the Remote Start system, windows, door locks or other controls could cause serious injury or death.
TO EXIT REMOTE START MODE
To drive the vehicle after starting the Remote Start system, either push and release the unlock button on the key fob to unlock the doors, or unlock the vehicle using Keyless Enter `n GoTM — Passive Entry via the door handles, and disarm the Vehicle Security system (if equipped). Then, prior to the end of the 15 minute cycle, push and release the START/STOP ignition button. The Remote Start system will turn the engine off if the Remote Start button on the key fob is pushed again, or if the engine is allowed to run for the entire 15 minute cycle. Once the ignition is placed in the ON/RUN position, the climate controls will resume the previously set operations (temperature, blower control, etc.).

NOTE:
· To avoid unintentional shutdowns, the system will disable for two seconds after receiving a valid Remote Start request.
· For vehicles equipped with the Keyless Enter `n GoTM — Passive Entry feature, the message “Remote Start Active — Push Start Button” will display in the instrument cluster display until you push the START/STOP ignition button.
REMOTE START FRONT DEFROST ACTIVATION — IF EQUIPPED
When Remote Start is active, and the outside ambient temperature is 40°F (4.5°C) or below, the system will automatically activate front defrost for 15 minutes or less. The timing is dependent on the ambient temperature. Once the timer expires, the system will automatically adjust the settings depending on ambient conditions. See “Remote Start Comfort Systems — If Equipped” in the next section for detailed operation.
REMOTE START COMFORT SYSTEMS — IF EQUIPPED
When Remote Start is activated, the front and rear defrost will automatically turn on in cold weather. The heated steering wheel and driver heated seat feature will turn on if selected in the Comfort menu screen within Uconnect Settings page 165. In warm weather, the driver vented seat feature will automatically turn on when Remote Start is activated, if programmed in the Comfort menu screen. The vehicle will adjust the climate control settings depending on the outside ambient temperature.

Automatic Temperature Control (ATC)
The climate controls will automatically adjust to the optimal temperature and mode settings depending on the outside ambient temperature. This will occur until the ignition is placed in the ON/RUN position where the climate controls will resume their previous settings.
For more information on ATC and climate control settings, see page 56.
NOTE: These features will stay on through the duration of Remote Start until the ignition is placed in the ON/RUN position. The climate control setting will change, and exit automatic operation, if manually adjusted by the driver while the vehicle is in Remote Start mode. This includes the OFF button on the climate controls, which will turn the system off.
REMOTE START WINDSHIELD WIPER DE-ICER ACTIVATION — IF EQUIPPED
When Remote Start is active and the outside ambient temperature is less than 33°F (0.6°C), the Windshield Wiper De-Icer will activate. Exiting Remote Start will resume its previous operation. If the Windshield Wiper De-Icer was active, the timer and operation will continue page 165.
REMOTE START ABORT MESSAGE
One of the following messages will display in the instrument cluster display if the vehicle fails to remote start or exits Remote Start prematurely:
· Remote Start Canceled — Door Open · Remote Start Canceled — Hood Open

GETTING TO KNOW YOUR VEHICLE 23

· Remote Start Canceled — Liftgate Open

· Remote Start Canceled — Fuel Low

· Remote Start Canceled — Time Expired

· Remote Start Canceled — System Fault

· Remote Start Disabled — Start Vehicle to Reset

2

The instrument cluster display message stays active

until the ignition is placed in the ON/RUN position.

VEHICLE SECURITY SYSTEM — IF EQUIPPED

The Vehicle Security system monitors the vehicle doors, hood, liftgate, and the Keyless Enter `n GoTM Ignition for unauthorized operation. While the Vehicle Security system is armed, interior switches for door locks and liftgate release handle are disabled. If something triggers the alarm, the Vehicle Security system will provide the following audible and visible signals:
· The horn will pulse · The turn signals will flash · The Vehicle Security Light in the instrument cluster
will flash
TO ARM THE SYSTEM
Follow these steps to arm the Vehicle Security system:
1. If any doors, windows, or the sunroof are open, close them.
2. Make sure the vehicle’s ignition is placed in the OFF position.
Make sure the vehicle’s keyless ignition system is OFF.

24 GETTING TO KNOW YOUR VEHICLE
3. Perform one of the following methods to lock the vehicle:
Push lock on the interior power door lock switch with the driver and/or passenger door open.
Push the lock button on the exterior Passive Entry door handle with a valid key fob available in the same exterior zone page 26.
Push the lock button on the key fob.
When the Vehicle Security system is armed, the Vehicle Security Light (located in the lower right portion of the instrument cluster display) will begin to flash every two seconds until it is disarmed.
NOTE: If the system is armed by pushing the lock button on the interior door panel, the Vehicle Security Light will flash rapidly for about 15 seconds once the door is closed, then slow down to every two seconds.
TO DISARM THE SYSTEM
The Vehicle Security system can be disarmed using any of the following methods:
· Push the unlock button on the key fob. · Grab the Passive Entry door handle to unlock the
door page 26.
· Cycle the ignition out of the OFF position to disarm the system.
NOTE:
· The driver’s door key cylinder cannot arm or disarm the Vehicle Security system. Use of the door key cylinder when the alarm is armed will sound the alarm when the door is opened.

· The Vehicle Security system remains armed when the power liftgate is opened using the liftgate button on the key fob. If someone enters the vehicle through the opened liftgate, then opens any door from the inside, the alarm will sound.
· If Passive Entry (if equipped) is used to unlock the liftgate, the Vehicle Security system is disarmed and the rest of the vehicle doors will remain locked unless all doors are set to unlock on first press within Uconnect Settings.
· When the Vehicle Security system is armed, the interior power door lock switches will not unlock the doors.
The Vehicle Security system is designed to protect your vehicle. However, you can create conditions where the system will give you a false alarm. If one of the previously described arming sequences has occurred, the Vehicle Security system will arm regardless of whether you are in the vehicle or not. If you remain in the vehicle and open a door, the alarm will sound. If this occurs, disarm the Vehicle Security system.
If the Vehicle Security system is armed and the battery becomes disconnected, the Vehicle Security system will remain armed when the battery is reconnected; the exterior lights will flash, and the horn will sound. If this occurs, disarm the Vehicle Security system.
REARMING OF THE SYSTEM
If something triggers the alarm and no action is taken to disarm it, the Vehicle Security system will turn the horn off after a 29 second cycle (with five seconds between cycles and up to eight cycles if the trigger remains active) and then rearm itself.

SECURITY SYSTEM MANUAL OVERRIDE
The Vehicle Security system will not arm if you lock the doors using the emergency lock lever page 25.
TAMPER ALERT
If something has triggered the Vehicle Security system in your absence, the horn will sound three times and the exterior lights will blink three times when you disarm the Vehicle Security system.
DELUXE VEHICLE SECURITY SYSTEM — IF EQUIPPED
The Deluxe Vehicle Security system monitors the doors, hood latch, and liftgate for unauthorized entry and the ignition switch for unauthorized operation. The system also includes a dual function intrusion sensor and vehicle tilt sensor. The intrusion sensor monitors the vehicle interior for motion. The vehicle tilt sensor monitors the vehicle for any tilting actions (tow away, tire removal, ferry transport, etc.). If a perimeter violation triggers the security system, the horn will sound for 29 seconds, and the exterior lights will flash followed by approximately five seconds of no activity. This will continue for eight cycles if no action is taken to disarm the system.
TO ARM THE SYSTEM
Follow these steps to arm the security system:
1. If any doors, windows, or the sunroof (if equipped) are open, close them.
2. Make sure the vehicle ignition system is OFF.

3. Perform one of the following methods to lock the vehicle:
Push lock on the interior power door lock switch with the driver and/or passenger door open.
Push the lock button on the exterior Passive Entry door handle with a key fob available in the same exterior zone page 26.
Push the lock button on the key fob.
NOTE:
· When armed, the interior motion sensor detects movement within the vehicle’s interior, including moving objects (i.e., people and pets) and air currents through open windows or the sunroof. The windows and sunroof should be closed, and moving objects should not be left in the vehicle when the intrusion detection is armed, otherwise false alarms can occur.
· Once the security system is armed, it remains in that state until you disarm it by following either of the disarming procedures described. If a power loss occurs after arming the system, you must disarm the system after restoring power to prevent alarm activation.
· The ultrasonic intrusion sensor (motion detector) actively monitors your vehicle every time you arm the Vehicle Security system. If you prefer, you can turn off the ultrasonic intrusion sensor when arming the Vehicle Security system. To do so, push the lock button on the key fob three times within 15 seconds of arming the system (while the Vehicle Security Light is flashing rapidly). The vehicle will remain locked but will disable the alarm in the case of repeated false alarms due to ambient conditions.

TO DISARM THE SYSTEM
The Vehicle Security system can be disarmed using any of the following methods:
· Push the unlock button on the key fob. · Grab the Passive Entry door handle to unlock the
door page 26.
· Cycle the vehicle ignition system out of the OFF position by pushing the START/STOP ignition button (requires at least one valid key fob in the vehicle).
NOTE:
· The driver’s door key cylinder and the liftgate button on the key fob cannot arm or disarm the Vehicle Security system.
· The Vehicle Security system remains armed during power liftgate entry. Pushing the liftgate button will not disarm the Vehicle Security system. If someone enters the vehicle through the opened liftgate, then opens any door, the alarm will sound.
· When the Vehicle Security system is armed, the interior power door lock switches will not unlock the doors.
· The ultrasonic intrusion sensor (motion detector) actively monitors your vehicle every time you arm the Vehicle Security system. If you prefer, you can turn off the ultrasonic intrusion sensor when arming the Vehicle Security system. To do so, push the lock button on the key fob three times within 15 seconds of arming the system (while the Vehicle Security Light is flashing rapidly). The vehicle will remain locked but will disable the alarm in the case of repeated false alarms due to ambient conditions.

GETTING TO KNOW YOUR VEHICLE 25

The Vehicle Security system is designed to protect your

vehicle; however, you can create conditions where the

system will give you a false alarm. If one of the previ-

ously described arming sequences has occurred, the

Vehicle Security system will arm regardless of whether

you are in the vehicle or not. If you remain in the vehicle and open a door, the alarm will sound. If this occurs,

2

disarm the Vehicle Security system.

If the Vehicle Security system is armed and the battery becomes disconnected, the Vehicle Security system will remain armed when the battery is reconnected; the exterior lights will flash and the horn will sound. If this occurs, disarm the Vehicle Security system.

SECURITY SYSTEM MANUAL OVERRIDE
The Vehicle Security system will not arm if you lock the doors using the emergency lock lever page 25.

DOORS

MANUAL DOOR LOCKS
The front doors can be manually unlocked with a single pull of the inside door handle. The driver’s door can also be manually unlocked by inserting the emergency key into the lock cylinder on the outside door handle.
NOTE: When using the emergency key to unlock the outside door handle, make sure the handle of the emergency key is pointing toward the rear of the vehicle. This will ensure the handle can be pulled all the way out while the key is in the lock cylinder.

26 GETTING TO KNOW YOUR VEHICLE The rear doors can be manually unlocked with a double pull of the inside door handle. Each door can be manually locked by inserting the emergency key into the emergency lock lever and sliding the lever upward. The emergency lock lever is located on the door latch face of each door.
Emergency Lock Lever (Driver’s Door Shown) NOTE:
· The emergency lock lever is only accessible when the door is open.
· Manually locking the vehicle will not arm the Vehicle Security system.
WARNING!
· For personal security and safety in the event of a collision, lock the vehicle doors before you drive as well as when you park and leave the vehicle.
· When exiting the vehicle, always make sure the ignition is in the OFF position, remove the key fob from the vehicle and lock your vehicle. (Continued)

WARNING!
· Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the gear selector.
· Do not leave the key fob in or near the vehicle, or in a location accessible to children, and do not leave the Keyless Enter `n GoTM Ignition in the ON/RUN position. A child could operate power windows, other controls, or move the vehicle.
POWER DOOR LOCKS
The power door lock buttons are located on each front door panel. Push the lock button to lock all doors and liftgate, or the unlock button to unlock all doors and liftgate.
When the doors are locked, an indicator light in the lock button will illuminate.

The driver’s door will unlock automatically if the key fob is detected inside the vehicle when the door lock button on the front door panel is used to lock the door, then the door is closed. The horn will also chirp to alert the driver. This will occur for two attempts. On the third attempt, the doors will lock even if the key fob is inside.
NOTE: If the key fob is located next to a mobile phone, laptop, or other electronic device, the wireless signal may get blocked, and the driver’s door may not unlock automatically.
If the door lock button is pushed while the ignition is in the ON/RUN position and the driver’s door is open, the doors will not lock.
Rear Passenger Power Door Locks
Power door lock buttons are located on each rear door trim panel. Push the lock button to lock the rear door or push the unlock button to unlock the rear door.
KEYLESS ENTER N GOTM — PASSIVE ENTRY The Passive Entry system is an enhancement to the vehicle’s Remote Keyless Entry (RKE) system and a feature of Keyless Entern GoTM. This feature allows you to lock and unlock the vehicle’s door(s) without having to push the key fob lock or unlock buttons.
If equipped, the rear doors will also have Passive Entry capabilities.

Power Door Lock Switches

NOTE:
· Passive Entry may be programmed on/off through Uconnect Settings page 165.
· The key fob may not be detected by the vehicle Passive Entry system if it is located next to a mobile phone, laptop or other electronic device; these devices may block the key fob’s wireless signal and prevent the Passive Entry handle from locking/ unlocking the vehicle.
· Passive Entry unlock initiates illuminated approach (low beams, license plate lamp, parking lights, door handle pocket lights [if equipped]) for a preset duration of 0, 30, 60 or 90 seconds. Passive Entry unlock also initiates two flashes of the turn signal lights.
· If wearing gloves, if it has been raining/snowing, or there is salt/dirt covering the Passive Entry door handle, the unlock and lock sensitivity can be affected, resulting in a slower response time.
· The doors may lock and unlock when water is sprayed on the Passive Entry door handles, if the key fob is located outside of the vehicle within 5 ft (1.5 m) of the handle.
· Passive Entry lock initiates one horn chirp and one flash of turn signal lights. These settings can be programmed on/off within Uconnect Settings page 165.
· If the vehicle is unlocked by Passive Entry and no door is opened within 60 seconds, the vehicle will relock and will rearm the Vehicle Security system (if equipped).

To Unlock From The Driver Or Passenger Side With a valid Passive Entry key fob within 5 ft (1.5 m) of the door handle, grab the handle to unlock the vehicle. Grabbing the driver’s door handle will unlock the driver door automatically. Grabbing the front passenger door handle (or a rear handle when equipped with four-door Passive Entry) will unlock all doors and the liftgate automatically.
Grab The Door Handle To Unlock NOTE:
· Either the driver door only or all doors will unlock when you grab hold of the front driver’s door handle, depending on the selected setting in the Uconnect system page 165.
· All doors will unlock when the front passenger (or a rear door when equipped with four-door Passive Entry) door handle is grabbed regardless of the driver’s door unlock preference setting.

GETTING TO KNOW YOUR VEHICLE 27

Frequency Operated Button Integrated Key (FOBIK-Safe)

To minimize the possibility of unintentionally locking a

Passive Entry key fob inside your vehicle, the Passive

Entry system is equipped with an automatic door

unlock feature which will function if the ignition switch

is in the OFF position.

2

There are five situations that trigger a FOBIK-Safe

search in any Passive Entry vehicle:

· A lock request is made by a valid Passive Entry key

fob while a door is open.

· A lock request is made by the Passive Entry door

handle while a door is open.

· A lock request is made by the door panel switch

while the door is open.

· When the Vehicle Security system is in pre-arm or

armed status and the liftgate transitions from

opened to closed.

· When the liftgate transitions from open to closed

and Remote Start is active.

When any of these situations occur, after all open doors

are shut, the FOBIK-Safe search will be executed. If it

detects a Passive Entry key fob inside the vehicle, the

vehicle will unlock and alert the customer.

NOTE: The vehicle will only unlock the doors when a valid Passive Entry key fob is detected inside the vehicle. The vehicle will not unlock the doors when any of the following conditions are true:
· The doors are manually locked using the emergency lock lever.
· Three attempts are made to lock the doors using the door panel switch and then the doors are closed.
· There is a valid Passive Entry key fob outside the vehicle within 5 ft (1.5 m) of a Passive Entry door handle.

28 GETTING TO KNOW YOUR VEHICLE To Lock The Vehicle’s Doors And Liftgate With one of the vehicle’s Passive Entry key fobs within 5 ft (1.5 m) of a Passive Entry door handle, touch the lock icon on the door handle to lock all four doors and liftgate.
Touch The Door Handle Lock Icon To Lock NOTE: Do NOT grab the door handle when touching the lock icon. This could unlock the door(s).

NOTE:
· After touching the door handle lock icon, you must wait two seconds before you can lock or unlock the doors using any Passive Entry door handle. This is done to allow you to check if the vehicle is locked by pulling the door handle, without the vehicle unlocking.
· If Passive Entry is disabled using the Uconnect Settings, the key fob protection described in “Frequency Operated Button Integrated Key (FOBIK- Safe)” remains active/functional.
· The Passive Entry system will not operate if the key fob battery is depleted.
To Unlock/Enter The Liftgate
The liftgate Passive Entry unlock feature is built into the electronic liftgate release button. With a valid Passive Entry key fob within 5 ft (1.5 m) of the liftgate, push the electronic liftgate release button for a power open on vehicles equipped with Power Liftgate. Pull the electronic liftgate handle and lift for Manual Liftgate vehicles.

Electronic Liftgate Handle
1 — Passive Entry Lock Button 2 — Electronic Liftgate Release Button
To Lock The Liftgate With a valid Passive Entry key fob within 5 ft (1.5 m) of the liftgate, push the Passive Entry lock button located on the outside liftgate door handle.
NOTE: The liftgate Passive Entry lock button will lock all doors and the liftgate page 329.

Do NOT Grab The Door Handle When Locking

AUTOMATIC UNLOCK DOORS ON EXIT
The doors will unlock automatically on vehicles with power door locks after the following sequence of actions:
1. The Automatic Unlock Doors On Exit feature is enabled within Uconnect Settings page 165.
2. All doors are closed.
3. The gear selector was not in PARK, then is placed in PARK.
4. Any door is opened.
AUTOMATIC DOOR LOCKS — IF EQUIPPED
The auto door lock feature default condition is enabled. When enabled, the door locks will lock automatically when the vehicle speed exceeds 15 mph (24 km/h). The auto door lock feature is enabled or disabled by an authorized dealer per written request of the customer. Please see an authorized dealer for service.
CHILD-PROTECTION DOOR LOCK SYSTEM — REAR DOORS
To provide a safer environment for small children riding in the rear seats, the rear doors are equipped with a Child-Protection Door Lock system.
To use the system, open each rear door, use a flatblade screwdriver (or emergency key) and rotate the dial to the lock or unlock position. When the system on a door is engaged, that door can only be opened by using the outside door handle even if the inside door lock is in the unlocked position.

Child-Protection Door Lock Function
NOTE:
· When the Child-Protection Door Lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.
· After disengaging the Child-Protection Door Lock system, always test the door from the inside to make certain it is in the unlocked position.
· After engaging the Child-Protection Door Lock system, always test the door from the inside to make certain it is in the locked position.
WARNING!
Avoid trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside with the Child-Protection locks engaged (locked).

GETTING TO KNOW YOUR VEHICLE 29

NOTE:

Always use this device when carrying children. After

engaging the child lock on both rear doors, check for

effective engagement by trying to open a door with the

internal handle. Once the Child-Protection Door Lock

system is engaged, it is impossible to open the doors

2

from inside the vehicle. Before getting out of the

vehicle, be sure to check that there is no one left

inside.

STEERING WHEEL

MANUAL TILT/TELESCOPING STEERING COLUMN — IF EQUIPPED
This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping lever is located below the steering wheel at the end of the steering column.

Manual Tilt/Telescoping Steering Column Handle

30 GETTING TO KNOW YOUR VEHICLE
To unlock the steering column, push the lever downward (toward the floor). To tilt the steering column, move the steering wheel upward or downward as desired. To lengthen or shorten the steering column, pull the steering wheel outward or push it inward as desired. To lock the steering column in position, push the lever upward until fully engaged.
WARNING! Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death.
POWER TILT/TELESCOPING STEERING COLUMN — IF EQUIPPED
This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The power tilt/telescoping steering column control is located below the multifunction lever on the steering column.
Power Tilt/Telescoping Steering Control Location

Use the four-way control to adjust the steering column.
NOTE: For vehicles equipped with Driver Memory Settings, use the key fob or the memory switch on the driver’s door trim panel to return the tilt/telescopic steering column to saved positions page 31.
WARNING!
Do not adjust the steering column while driving. Adjusting the steering column while driving or driving with the steering column unlocked, could cause the driver to lose control of the vehicle. Failure to follow this warning may result in serious injury or death.
HEATED STEERING WHEEL — IF EQUIPPED
The steering wheel contains a heating element that helps warm your hands in cold weather. The heated steering wheel has only one temperature setting. Once the heated steering wheel has been turned on, it will stay on until the operator turns it off. The heated steering wheel may not turn on when it is already warm. The heated steering wheel button is located on the center of the instrument panel below the radio screen, and within the Comfort screen of the touchscreen.
· Press the heated steering wheel button once to turn the heating element on.
· Press the heated steering wheel button a second time to turn the heating element off.

NOTE: The engine must be running for the heated steering wheel to operate. For information on use with the Remote Start system, see page 23.
WARNING!
· Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions must exercise care when using the steering wheel heater. It may cause burns even at low temperatures, especially if used for long periods.
· Do not place anything on the steering wheel that insulates against heat, such as a blanket or steering wheel covers of any type and material. This may cause the steering wheel heater to overheat.
UCONNECT VOICE RECOGNITION QUICK TIPS — IF EQUIPPED
INTRODUCING VOICE RECOGNITION
Start using Uconnect Voice Recognition with these helpful quick tips. These key Voice Commands and tips will help you control your vehicle’s Voice Recognition (VR) system.

BASIC VOICE COMMANDS
The following basic Voice Commands can be given at any point while using your Uconnect system.
Push the VR button on the steering wheel or say the vehicle’s Wake Up word, “Hey Uconnect” or “Hey Jeep®”. The factory default Wake Up word is set to “Hey Uconnect” and can be reprogrammed through the Uconnect Settings. After the beep, say:
· ” Cancel” to stop a current voice session. · ” Help” to hear a list of suggested Voice Commands. · ” Repeat” to listen to the system prompts again.
Notice the visual cues that inform you of your Voice Recognition system’s status.
GET STARTED
The VR button is used to activate/deactivate your Voice Recognition system. You can also use the system’s “Wake Up” word to activate voice recognition. The “Wake Up” word can be set through the Uconnect Settings page 165.
Helpful hints for using Voice Recognition:
· Reduce background noise. Wind noise and passenger conversations are examples of noise that may impact recognition.
· Speak clearly at a normal pace and volume while facing straight ahead.
· Each time you give a Voice Command, first push the VR button or say the “Wake Up” word, wait until after the beep, then say your Voice Command.
· You can interrupt the help message or system prompts by pushing the VR button and saying a Voice Command from the current category.

· You can also interrupt the help message or system prompts by speaking. This feature is called “bargein” and can be set through the Uconnect Settings page 165.
Uconnect Voice Command Buttons 1 — For Vehicles Equipped With Navigation: Push The Voice Recognition Button To Begin Radio, Media, Navigation, Climate, Start Or Answer A Phone Call, And Send Or Receive A Text 1 — For Vehicles Not Equipped With Navigation: Push The Phone Button To Answer An Incoming Phone Call 2 — Push The Hang Up Button To End A Call Currently In Progress

GETTING TO KNOW YOUR VEHICLE 31

ADDITIONAL INFORMATION

© 2023 FCA US LLC. All rights reserved. Mopar and

Uconnect are registered trademarks and Mopar Owner

Connect is a trademark of FCA US LLC. SiriusXM® and

all related marks and logos are trademarks of SiriusXM® Radio Inc. page 329.

2

For Uconnect system support, call 1-877-855-8400 (24 hours a day 7 days a week) or visit DriveUconnect.com (US) or DriveUconnect.ca (Canada).

DRIVER AND PASSENGER MEMORY
SETTINGS — IF EQUIPPED
This feature allows the driver, and if equipped, also the front passenger to save up to two different memory profiles for easy recall through a memory switch. Each memory profile saves desired position settings for the following features:
Driver’s Side
· Seat position · Easy Entry/Exit seat (if equipped) · Side mirrors · Power tilt and telescopic steering column
(if equipped)
· A set of desired radio station presets
Passenger’s Side (If Equipped)
· Seat Position
The memory settings switches are located on the front door panels, next to the door handle, and consists of three buttons:
· The set (S) button, which is used to activate the memory save function.

32 GETTING TO KNOW YOUR VEHICLE
· The (1) and (2) buttons which are used to recall either of two saved memory profiles.
Memory Setting Buttons NOTE:
· Your vehicle is equipped with two key fobs, each can be linked to either driver’s side memory position 1 or 2.
· Front passenger memory settings cannot be linked to a key fob.
PROGRAMMING THE MEMORY FEATURE
To create a new memory profile, perform the following: NOTE: Saving a new memory profile will erase the selected profile from memory.

1. Place the vehicle’s ignition in the ON/RUN position (do not start the engine).
2. Adjust all memory profile settings to desired preferences (i.e., seat, side mirror, power tilt/telescopic steering column [if equipped], and radio station presets).
3. Push and release the set (S) button on the memory switch.
4. Within five seconds, push and release either of the memory buttons (1) or (2). The instrument cluster display will indicate which memory position has been set.
NOTE: Memory profiles can be set without the vehicle in PARK, but the vehicle must be below 5 mph (8 km/h) to recall a memory profile.
LINKING AND UNLINKING THE KEY FOB TO MEMORY
Your key fobs can be programmed to recall one of two saved driver’s side memory profiles.
NOTE: Before programming your key fobs you must select the “Personal Settings Linked To Key Fob” feature through the Uconnect Settings page 165. To program your key fobs, perform the following:
1. Place the vehicle’s ignition in the OFF position.
2. Select a desired driver’s side memory profile, 1 or 2.

3. Once the profile has been recalled, push and release the set (S) button on the memory switch.
4. Within five seconds, push and release button (1) or (2) accordingly. “Memory Profile Set” (1 or 2) will display in the instrument cluster.
5. Push and release the lock button on the key fob within 10 seconds.
NOTE: Your key fobs can be unlinked from your driver’s side memory settings by pushing the set (S) button, and within 10 seconds, pushing the unlock button on the key fob.
MEMORY POSITION RECALL
NOTE: Memory Recall is available when not in PARK, if the vehicle speed is below 5 mph (8 km/h).
· To recall a memory settings profile using the memory switches, push memory button (1) or (2) on the memory switch.
· To recall the driver’s side memory settings using the key fob, push the unlock button on the key fob linked to memory position 1 or 2.
A recall can be canceled by pushing any of the memory buttons during a recall (S, 1, or 2), or by pushing any of the seat adjustment switches. When a recall is canceled, the seat and power tilt/telescopic steering column (if equipped) will stop moving. A delay of one second will occur before another recall can be selected.

SEATS
Seats are a part of the Occupant Restraint system of the vehicle.
WARNING!
· It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
· Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed.
· Be sure everyone in your vehicle is in a seat and using a seat belt properly.
MANUAL ADJUSTMENT FRONT SEATS — IF EQUIPPED
WARNING!
· Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust the seat only while the vehicle is parked.
· Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked.

Manual Front Passenger Seat Forward/Rearward Adjustment
Some models may be equipped with a manual front passenger seat. The passenger seat can be adjusted forward or rearward by using a bar located by the front of the seat cushion, near the floor.

GETTING TO KNOW YOUR VEHICLE 33

WARNING!

· Seats should be adjusted before fastening the seat

belts and while the vehicle is parked. Serious

injury or death could result from a poorly adjusted

seat belt.

2

Manual Front Passenger Seatback Adjustment — Recline
To recline, lean forward slightly and lift the lever located on the outboard side of the seat. Then, push the seat rearward to the desired position and release the lever. To return the seatback to its normal position, lean forward and lift the lever. To ensure the seatback is latched, use body pressure to lean forward and rearward.

Adjustment Bar
While sitting in the seat, lift up on the bar located under the seat cushion and move the seat forward or rearward. Release the bar once you have reached the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.
WARNING!
· Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. (Continued)

Recline Lever

34 GETTING TO KNOW YOUR VEHICLE
WARNING!
Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.
MANUAL ADJUSTMENT REAR SEATS
Vehicles equipped with third row seating may have a second row bench seat, or second row captain’s chairs. Vehicles equipped with only second row seating, will have a second row bench seat.
WARNING!
Do not pile luggage or cargo higher than the top of the seatback. This could impair visibility or become a dangerous projectile in a sudden stop or collision.
NOTE: You may experience deformation in the seat cushion from the seat belt buckles if the seats are left folded for an extended period of time. This is normal and by simply unfolding the seats to the open position, over time the seat cushion will return to its normal shape.

Second Row Bench Seat — If Equipped
SECOND ROW BENCH SEAT FORWARD/ REARWARD ADJUSTMENT — IF EQUIPPED
Lift up on the adjusting bar located at the front of the seat near the floor and release it when the seat is at the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.

Rear Seat Recline Lever

WARNING!
Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.

Rear Seat Adjustment Bar
SECOND ROW BENCH SEAT RECLINE ADJUSTMENT
To recline, lean forward slightly and lift the lever located on the outboard side of the seat. Then, push the seat rearward to the desired position and release the lever. To return the seatback to its normal position, lean forward and lift the lever. To ensure the seatback is latched, use body pressure to lean forward and rearward.

SECOND ROW BENCH FOLD FLAT SEAT
To provide additional storage area, each rear seat can be folded flat. This allows for extended cargo space and still maintains some rear seating room.
NOTE: Prior to folding the rear seat, it may be necessary to position the front seat to its mid-track position. Also, be sure that the front seats are fully upright and positioned forward. This will allow the rear seat to fold down easily.
To lower the seatback, pull upward on the recline lever located on the outboard side of the seat, and let the seatback fold forward automatically.

Second Row Bench Seat Folded Flat
To raise the seatback, fold the seatback up into its original position and lock it into place.

Easy Entry Lever Location

WARNING!
Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.

SECOND ROW BENCH SEAT EASY ACCESS FOR THIRD ROW — IF EQUIPPED
If the vehicle is equipped with third row seating, the second row seats can tip forward to allow passengers to easily access the third row seats.
Pull upward on the easy entry lever located on the outboard side of the seatback, then tip and slide the entire seat forward.

Access To Third Row Seats
To return the seat to a sitting position, unfold the seatback upright until it locks and push the seat rearward until the track locks.

GETTING TO KNOW YOUR VEHICLE 35

Second Row Captain’s Chairs — If Equipped

Vehicles equipped with third row seating may be equipped with second row captain’s chairs.

SECOND ROW CAPTAIN’S CHAIRS

2

FORWARD/REARWARD ADJUSTMENT

Lift up on the adjusting bar located at the front of the seat near the floor and release it when the seat is at the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.

Rear Seat Adjustment Bar

36 GETTING TO KNOW YOUR VEHICLE
SECOND ROW CAPTAIN’S CHAIRS RECLINE ADJUSTMENT
To recline, lean forward slightly and lift the lever located on the outboard side of the seat. Then, push the seat rearward to the desired position and release the lever. To return the seatback to its normal position, lean forward and lift the lever. To ensure the seatback is latched, use body pressure to lean forward and rearward.

SECOND ROW CAPTAIN’S CHAIRS FOLD FLAT SEATS
The second row seatbacks can be folded flat to carry cargo.
Pull upward on the recline lever located on the outboard side of each second row seat, and guide the seatback down into the folded position.

SECOND ROW CAPTAIN’S CHAIR EASY ACCESS FOR THIRD ROW
The second row seats can tip forward to allow passengers to easily access the third row seats. Pull upward on the easy entry lever located on the outboard side of the seatback, then tip and slide the entire seat forward.

Rear Seat Recline Lever
WARNING!
Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.

Second Row Captain’s Chairs Folded Flat
To Raise The Rear Seats Fold the seatbacks upward to their original position, and lock them into place.
WARNING!
Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.

Easy Entry Lever Location
Access To Third Row Seats To return the seat to a sitting position, unfold the seatback upright until it locks and push the seat rearward until the track locks.

Manual Folding Third Row — If Equipped
Both third row seats can be folded forward to increase the cargo area. To lower either seat, pull on the release handle located on the back of the seat and lower the seat using the pull strap located next to the release handle.
NOTE: The second row seats must be in their full upright position or folded flat when folding the third row seats.

To raise the seat, pull the seat toward you using the strap located on the back of the seat.
WARNING!
Be certain that the seatback is securely locked into position. If the seatback is not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury.
POWER ADJUSTMENT FRONT SEATS — IF EQUIPPED
Some models may be equipped with 12-way power driver and front passenger seats. The power seat switches are located on the outboard side of the seat. There are three switches that control the movement of the seat cushion and the seatback.

Release Handles

Third Row Folded

Power Seat Switches
1 — Cushion Extender Switch (If Equipped) 2 — Seat Switch 3 — Seatback And Bolster Adjustment Switch

GETTING TO KNOW YOUR VEHICLE 37

Adjusting The Seat Forward Or Rearward

The seat can be adjusted both forward and rearward.

Push the seat switch forward or rearward. The seat will

move in the direction of the switch. Release the switch when the desired position has been reached.

2

Adjusting The Seat Up Or Down
The height of the seats can be adjusted up or down. Pull upward or push downward on the rear of seat switch, the seat will move in the direction of the switch. Release the switch when the desired position has been reached.

Tilting The Seat Up Or Down
The angle of the seat cushion can be adjusted in two directions. Pull upward or push downward on the front of the seat switch, the front of the seat cushion will move in the direction of the switch. Release the switch when the desired position has been reached.

Reclining The Seatback
The angle of the seatback can be adjusted forward or rearward. Push the seatback switch forward or rearward, the seat will move in the direction of the switch. Release the switch when the desired position is reached.

WARNING!
· Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
(Continued)

38 GETTING TO KNOW YOUR VEHICLE
WARNING!
· Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.
· Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.

CAUTION!
Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path.
Seatback Bolster Adjustment — If Equipped
The front driver and passenger seatback bolsters can be extended outward, or retracted inward by pushing the bolster adjustment button located in the center of the seatback switch. Push the top of the button to extend the bolsters, or push the bottom of the button to retract the bolsters.

Seatback Bolster Adjustment Button
1 — Extend Seatback Bolsters 2 — Retract Seatback Bolsters
Cushion Extender
The cushion can be extended forward a few inches (centimeters) to increase thigh support. Push the cushion extender switch forward or rearward to extend or retract the cushion. Release the switch when the desired position has been reached.
Power Lumbar — If Equipped
Vehicles equipped with power driver or passenger seats may also be equipped with power lumbar. The power lumbar switch is located on the outboard side of the power seat. Push the switch forward to increase the lumbar support. Push the switch rearward to decrease the lumbar support. Pushing upward or downward on the switch will raise and lower the position of the support.

Power Lumbar Switch
Easy Entry/Exit Seat — If Equipped
This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle.
The distance the driver seat moves depends on where you have the driver seat positioned when you place the vehicle’s ignition in the OFF position.
· When you place the vehicle’s ignition in the OFF position, the driver seat will move about 2.4 inches (6 cm) rearward if the driver seat position is greater than or equal to 2.7 inches (6.8 cm) forward of the rear stop. The seat will return to its previously set position when you place the vehicle’s ignition in the ON/RUN position.
· The Easy Entry/Easy Exit feature is disabled when the driver seat position is less than 0.9 of an inch (2.3 cm) forward of the rear stop. At this position, there is no benefit to the driver by moving the seat for Easy Exit or Easy Entry.
When enabled in Uconnect Settings, Easy Entry and Easy Exit positions are stored in each memory setting profile page 31.

NOTE: The Easy Entry/Exit feature is enabled or disabled within the Uconnect system page 165.
POWER ADJUSTMENT REAR SEATS — IF EQUIPPED
WARNING!
· Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
· Seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could result from a poorly adjusted seat belt.
· Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death.
· Do not place the seat belt webbing behind the third row stow clip when using the seat belt to restrain an occupant. The seat belt will not be positioned properly on the occupant and they could be more seriously injured in an accident as a result.
CAUTION!
Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path.

Rear Seat Power Folding Seatbacks — If Equipped
If the vehicle is equipped with third row seating, the second and third rows may be equipped with power folding seatbacks.
A one-touch power folding seat switch is located in the right rear trim panel inside the cargo area, as part of a switch bank.
NOTE:
· You may need to move the front seats forward to allow the second row seats to fold properly, as they may bump into the Rear Seat Entertainment touchscreens (if equipped).
· The third row seat belts may interfere with the power folding of the seat. Place the seat belt webbing behind the stow clip before stowing or opening the seat. When the seat is in the desired position, remove the webbing from the stow clip so that it is ready for use. Never leave the seat belt in the stow clip when it is used to restrain an occupant.
· The head restraints will lower automatically as necessary when the power seat begins to move when the vehicle is in PARK, and a rear door or the liftgate is open.
The rear switch bank allows multiple power folding positions for the second and third row seats. The second row seats can be folded using these switches, while the third row can be folded or unfolded.

GETTING TO KNOW YOUR VEHICLE 39
2
Rear Panel Power Switch Bank 1 — Second Row Left Side Fold 2 — Second Row Right Side Fold 3 — Third Row Left Side Fold/Unfold 4 — Third Row Right Side Fold/Unfold There are also power folding switches for the third row seats located on the C-pillar (just behind the rear doors on the trim panels).
C-Pillar Power Folding Switches (Left Side Shown) 1 — Third Row Left Side Fold/Unfold 2 — Third Row Right Side Fold/Unfold

40 GETTING TO KNOW YOUR VEHICLE
POWER SEATBACK MASSAGE — IF EQUIPPED
The driver’s and front passenger’s seatbacks may be equipped with power massage. The massage feature can be turned on/off through the massage button located on the door panel near the handle, or through the Comfort screen on the radio.
Door Panel Massage Button Once activated by either method, the massage controls will display on the radio screen, and “Massage Type” and “Intensity Level” can be selected for the activated seat. There are four intensity levels and five massage types that can be selected. Intensity Levels:
· High · Med · Low · Off

Massage Types:
· Waterfall · Lower Back · Extend · Low Extend · Rock Climb
The selected settings will save in the system’s memory when turned off, and will resume the next time the system is turned on.
NOTE:
· The engine must be running for the power seatback massage to operate.
· The massage feature will turn off after 20 minutes of use. However, if the massage type or intensity level is changed, the timer then resets.
HEATED SEATS — IF EQUIPPED
WARNING!
· Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time.
· Do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface temperature of the seat.

Front Heated Seats
The front heated seats control buttons are located on the center stack below the radio screen or within the Uconnect system. You can gain access to the control buttons through the Comfort screen.
· Press the heated seat switch once to turn the HI setting on.
· Press the heated seat switch a second time to turn the MED setting on.
· Press the heated seat switch a third time to turn the LO setting on.
· Press the heated seat switch a fourth time to turn the heating elements off.
NOTE:
· Once a heat setting is selected, heat will be felt within two to five minutes.
· The engine must be running for the heated seats to operate.
· The level of heat selected will stay on until the operator changes it. For information on use with the Remote Start system, see page 23.
Rear Heated Seats — If Equipped
The two second row outboard seats may be equipped with heated seats. There are two heated seat switches that allow the rear passengers to operate the seats independently. The heated seat switches for each heater are located on the rear of the center console.

You can choose from HI, MED, LO, or OFF heat settings. Indicator lights in each switch illuminate indicating the level of heat in use.
· Push the heated seat switch once to turn the HI setting on.
· Push the heated seat switch a second time to turn the MED setting on.
· Push the heated seat switch a third time to turn the LO setting on.
· Push the heated seat switch a fourth time to turn the heating elements off.
The level of heat selected will stay on until the operator changes it.
NOTE: The engine must be running for the heated seats to operate.
VENTILATED SEATS — IF EQUIPPED
Located in the seat cushion and seatback are fans that draw the air from the passenger compartment and move air through fine perforations in the seat cover to help keep the occupant cooler in higher ambient temperatures.
Front Ventilated Seats
The ventilated seats control buttons are located on the center stack below the radio screen or within the Uconnect system. The fans operate at three speeds: HI, MED and LO.
· Press the ventilated seat switch once to choose HI. · Press the ventilated seat switch a second time to
choose MED.

· Press the ventilated seat switch a third time to choose LO.
· Press the ventilated seat switch a fourth time to turn the ventilation off.
NOTE: The engine must be running for the ventilated seats to operate.
For information on use with the Remote Start system, see page 23.
Rear Ventilated Seats — If Equipped
The two second row outboard seats may be equipped with ventilated seats. The rear ventilated seat control switches are located on the rear of the center console and allow the rear passengers to operate the seats independently. The fans operate at three speeds: HI, MED, and LO. Push the ventilated seat switches to toggle through the speeds, or to turn the feature off.
There are two ventilated seat switches
· Push the ventilated seat switch once to choose HI. · Push the ventilated seat switch a second time to
choose MED.
· Push the ventilated seat switch a third time to choose LO.
· Push the ventilated seat switch a fourth time to turn the ventilation off.
NOTE: The engine must be running for the ventilated seats to operate.

GETTING TO KNOW YOUR VEHICLE 41

HEAD RESTRAINTS

Head restraints are designed to reduce the risk of injury

by restricting head movement in the event of a rear

impact. Head restraints should be adjusted so that the

top of the head restraint is located above the top of your ear.

2

WARNING!
· All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a crash.
· Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision.

Front Head Restraints
Your vehicle is equipped with front four-way driver and passenger head restraints.
To raise the head restraint, pull upward on the head restraint. To lower the head restraint, push the adjustment button, located at the base of the head restraint, and push downward on the head restraint.
NOTE: The head restraints should only be removed by qualified technicians, for service purposes only. If either of the head restraints require removal, see an authorized dealer.

42 GETTING TO KNOW YOUR VEHICLE

Head Restraint Adjustment Button To adjust the head restraint forward, pull the top of the head restraint toward the front of the vehicle as desired and release. To adjust the head restraint rearward, pull the top of the head restraint to the forward most position and release. The head restraint will return to the rear most position.
Upright Position

Forward Adjustment

WARNING!
· All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a crash.
· Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision.

WARNING!
· All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a crash.
· Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision.
Head Restraints — Second Row Captain’s Chairs (If Equipped)
If the second row is equipped with captain’s chairs, the head restraints are not adjustable or removable. They automatically fold forward when the seatback is folded, and do not return to their normal position when the seatback is raised. After returning the seatback to its upright position after a folding operation, raise the head restraint until it locks in place.

Head Restraints — Second Row Bench (If Equipped)
If the second row is equipped with a bench seat, the head restraints on the outboard seats are not adjustable or removable. They automatically fold forward when the seatback is folded, and do not return to their normal position when the seatback is raised. After returning the seatback to its upright position after a folding operation, raise the head restraint until it locks in place.
The center head restraint has one adjustment position, and can be adjusted up or down when the seat is occupied. Pull up on the head restraint to raise it. To lower the head restraint, push the adjustment button located on the base of the head restraint, and push downward on the head restraint until it locks into place.
NOTE: The center head restraint is not removable.

Center Seat Head Restraint Adjustment Button
NOTE: For information on child restraint tethering, see
page 222.
WARNING!
· All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a crash.
· Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision.

Third Row Head Restraints — If Equipped
The third row head restraints are not adjustable or removable, but can be folded for improved visibility when the vehicle is in REVERSE, and there are no occupants in the seats.
Press the Headrest Fold button within the Controls menu of the Uconnect system to power fold the third row head restraints. The head restraints will also automatically fold when the seatbacks are folded forward using the release handles on the backs of the seats from the cargo area.
NOTE:
· The head restraints must be raised manually when occupying the third row.
· Do not fold if there are passengers seated in the third row seats.
WARNING!
· All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a crash.
· Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision.

GETTING TO KNOW YOUR VEHICLE 43
MIRRORS

INSIDE REARVIEW MIRROR

Manual Mirror — If Equipped

2

The mirror head can be adjusted up, down, left, and right. The mirror should be adjusted to center on the view through the rear window.

Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle). The mirror should be adjusted while set in the day position (small control forward toward the windshield).

Adjusting Rearview Mirror

44 GETTING TO KNOW YOUR VEHICLE
Automatic Dimming Mirror — If Equipped
The mirror head can be adjusted up, down, left, and right. The mirror should be adjusted to center on the view through the rear window. This mirror automatically adjusts for headlight glare from vehicles behind you.
NOTE: The Automatic Dimming Mirror feature is disabled when the vehicle is in REVERSE to improve the driver’s view. You can turn the feature on or off through the Uconnect system page 165.
Automatic Dimming Mirror
Digital Rearview Mirror — If Equipped
The Digital Rearview Mirror provides a high definition, wide and unobstructed view of the road behind while driving. Position the mirror in the regular Automatic Dimming Mirror mode, then activate the Digital Rearview Mirror mode. To activate the Digital Rearview Mirror, pull the on/off control lever on the bottom of the mirror rearward toward the driver.

Digital Rearview Mirror
1 — On/Off Control/Toggle 2 — Menu Button 3 — Left Scroll Button 4 — Right Scroll Button
Push the menu button next to the on/off control/toggle to access the following mirror options:
· Brightness · Tilt
Use the menu button to scroll through the feature options, and the left and right scroll buttons to adjust the feature content (brightness or tilt) higher/lower or up/down. When not in use, push the on/off forward toward the windshield to return the mirror to the regular Automatic Dimming Mirror.
NOTE:
· The Digital Rearview Mirror is not as effective during nighttime driving in low light applications due to low ambient light levels. In the event that it provides the user with less than expected vision, the mirror can be reverted to a normal reflective electrochromatic mirror by pushing the control/toggle forward in the vehicle and putting the mirror into Automatic Dimming Mirror mode.

· When the rear window washer is activated by pushing the windshield wiper/washer lever forward, the Rear Back Up and Digital Rearview Mirror (if equipped) cameras are also washed. For more information, see page 56.
ILLUMINATED VANITY MIRRORS
To access an illuminated vanity mirror, flip down one of the visors. Lift the cover to reveal the mirror. The light will turn on automatically.
Lift Cover On Vanity Mirror
Sun Visor Slide-On-Rod Feature — If Equipped
The sun visor Slide-On-Rod feature allows for additional flexibility in positioning the sun visor to block out the sun. 1. Fold down the sun visor. 2. Unclip the visor from the center clip. 3. Pivot the sun visor toward the side window.

4. Extend the sun visor blade for additional sun blockage.
NOTE: The sun visor blade can also be extended while the sun visor is against the windshield for additional sun blockage through the front of the vehicle.
OUTSIDE MIRRORS
To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror.
WARNING!
Vehicles and other objects seen in an outside convex mirror will look smaller and farther away than they really are. Relying too much on side convex mirrors could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in a side convex mirror.
Outside Mirrors Folding Feature
All outside mirrors are hinged and may be moved either forward or rearward to resist damage. The hinges have three detent positions:
· Full forward position · Full rearward position · Normal position

Outside Mirrors With Turn Signal And Approach Lighting — If Equipped
Driver and passenger outside mirrors with turn signal and approach lighting contain four LEDs, which are located in the upper outer corner of each mirror.
Three of the LEDs are turn signal indicators, which flash with the corresponding turn signal lights in the front and rear of the vehicle. Turning on the Hazard Warning flashers will also activate these LEDs.
The fourth LED supplies illuminated entry lighting, which turns on in both mirrors when you use the key fob or open any door. This LED shines outward to illuminate the front and rear door handles. It also shines downward to illuminate the area in front of the doors.
The illuminated entry lighting fades to off after about 30 seconds or it will fade to off immediately once the ignition is placed in the ON/RUN position.
NOTE: The approach lighting will not function when the gear selector is moved out of the PARK position.
OUTSIDE AUTOMATIC DIMMING MIRROR — IF EQUIPPED
The outside driver side mirror will automatically adjust for glare from vehicles behind you. This feature is controlled by the inside automatic dimming mirror. The mirror will automatically adjust for headlight glare when the inside mirror adjusts.

GETTING TO KNOW YOUR VEHICLE 45

POWER MIRRORS

The power mirror control switch is located on the driver’s side door trim panel.

To adjust a mirror, rotate the control switch to the mirror

you want to adjust (L) or (R). Then push the switch in the direction that you want the mirror to move.

2

Power Mirror Switch
1 — Neutral Position 2 — Left Mirror 3 — Control Switch 4 — Right Mirror 5 — Power Folding Position
NOTE: Once adjustment is complete, rotate the knob to the neutral position to prevent accidental movements.

46 GETTING TO KNOW YOUR VEHICLE
Power Folding — If Equipped
To fold the door mirrors in using the Power Folding Mirror function, rotate the control switch to the power folding position. Rotating the control to the left, right, or neutral position will return the mirrors to the driving position.
If the power mirror control switch is moved again during door mirror folding (from closed to open position and vice versa), the movement direction is reversed.
Resetting The Power Folding Outside Mirrors
You may need to reset the power folding mirrors if the following occurs:
· The mirrors are accidentally blocked while folding. · The mirrors are accidentally manually folded/
unfolded (by hand or by pushing the power folding mirror switch).
· The mirrors come out of the unfolded position. · The mirrors shake and vibrate at normal driving
speeds.
To reset the power folding mirrors: Fold and unfold them by turning the switch (this may require multiple switch activations to synchronize the driver and passenger mirror). This resets them to their normal position.
Power mirror position can be saved as part of the Driver Memory Settings (if equipped) page 31.

AUTOMATIC POWER FOLDING MIRRORS — IF EQUIPPED
When enabled within Uconnect Settings page 165, the exterior mirrors will automatically fold when the vehicle’s ignition is placed in the OFF position, and after the doors are locked and closed.
The exterior mirrors will auto-fold in the following situations after the ignition is placed in the OFF position:
· Pushing the lock button on the door panel before the door is opened.
NOTE: If the doors are already locked, push the lock button again.
· Opening the door, then pushing the lock button on the door panel, followed by closing the door.
· After exiting the vehicle, close the doors then push the lock button on the key fob.
· After exiting the vehicle, close the doors then touch the lock icon on the Passive Entry door handle.
If the exterior mirrors were folded automatically, they will unfold when the ignition is placed in the ON/RUN position.
NOTE: If the mirrors were folded manually, by using the power folding mirror switch on the driver’s door panel, they will not automatically unfold.
HEATED MIRRORS — IF EQUIPPED
These mirrors are heated to melt frost or ice. This feature will be activated whenever you turn on the rear window defroster (if equipped) page 56.

TILT SIDE MIRRORS IN REVERSE — IF EQUIPPED
Tilt Side Mirrors In Reverse provides automatic outside mirror positioning which will aid the driver’s view of the ground rearward of the front doors. Outside mirrors will move slightly downward from the present position when the vehicle is shifted into REVERSE. Outside mirrors will then return to the original position when the vehicle is shifted out of REVERSE position. Each stored memory setting will have an associated Tilt Side Mirrors In Reverse position. NOTE: The Tilt Side Mirrors In Reverse feature can be turned on and off using the Uconnect system page 165.
UNIVERSAL GARAGE DOOR OPENER (HomeLink®) — IF EQUIPPED
HomeLink® Buttons And Indicator Light

Use this QR code to access your digital experience.

· HomeLink® replaces up to three

hand-held transmitters that operate devices such as garage door open-

Scan me

ers, motorized gates, lighting or

home security systems. The HomeLink® unit is pow-

ered by your vehicle’s 12 Volt battery.

· The HomeLink® buttons that are located in the

overhead console or sun visor designate the three

different HomeLink® channels.

· To operate HomeLink®, push and release any of the

programmed HomeLink® buttons. These buttons

will activate the devices they are programmed to

with each press of the corresponding HomeLink®

button.

· The HomeLink® indicator light is located above the

center button.

NOTE:
HomeLink® is disabled when the Vehicle Security system is active page 329.

BEFORE YOU BEGIN PROGRAMMING HOMELINK®
For efficient programming and accurate transmission of the Radio Frequency (RF) signal, it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink® system. Make sure your hand-held transmitter is programmed to activate the device you are trying to program your HomeLink® button to.
Ensure that your vehicle is parked outside of the garage before you begin programming.

It is recommended that you erase all the channels of your HomeLink® before you use it for the first time. If you require assistance, please call toll-free 1-800-355-3515 or visit HomeLink.com.
ERASING ALL THE HOMELINK® CHANNELS
To erase the channels, follow this procedure:
1. Place the ignition switch into the ON/RUN position.
2. Push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes.
NOTE: Erasing all channels should only be performed when programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
IDENTIFYING WHETHER YOU HAVE A ROLLING CODE OR NON-ROLLING CODE DEVICE
Before programming a device to one of your HomeLink® buttons, you must determine whether the device has a rolling code or non-rolling code. Rolling Code Devices
To determine if your device has a rolling code, a good indicator is its manufacturing date. Typically, devices manufactured after 1995 have rolling codes. A device with a rolling code will also have a “LEARN” or “TRAIN” button located where the antenna is attached to the device. The button may not be immediately visible when looking at the device. The name and color of the button may vary slightly by manufacturer.

GETTING TO KNOW YOUR VEHICLE 47

NOTE:

The “LEARN” or “TRAIN” button is not the button you normally use to operate the device.

Non-rolling Code Devices

Most devices manufactured before 1995 will not have a rolling code. These devices will also not have a “LEARN”

2

or “TRAIN” button.

PROGRAMMING HOMELINK® TO A GARAGE DOOR OPENER
To program any of the HomeLink® buttons to activate your garage door opener motor, proceed as follows:

NOTE: All HomeLink® buttons are programmed using this procedure. You do not need to erase all channels when programming additional buttons.
1. Place the ignition switch into the ON/RUN position.
2. Place the garage door opener transmitter 1 to 3 inches (3 to 8 cm) away from the HomeLink® button you wish to program, while keeping the HomeLink® indicator light in view.
3. Push and hold the HomeLink® button you want to program while you push and hold the garage door opener transmitter button you are trying to replicate.
4. Continue to hold both buttons and observe the HomeLink® indicator light. The HomeLink® indicator light will flash slowly and then rapidly. Once this happens, release both buttons.

NOTE:
Make sure the garage door opener motor is plugged in before moving on to the rolling code/non-rolling code final steps.

48 GETTING TO KNOW YOUR VEHICLE
Rolling Code Garage Door Opener Final Steps
NOTE: You have 30 seconds in which to initiate rolling code final step 2, after completing rolling code final step 1.
1. At the garage door opener motor (in the garage), locate the “LEARN” or “TRAIN” button. This can usually be found where the hanging antenna wire is attached to the garage door opener motor. Firmly push and release the “LEARN” or “TRAIN” button.
2. Return to the vehicle and push the programmed HomeLink® button three times (holding the button for two seconds each time). If the garage door opener motor operates, programming is complete.
3. Push the programmed HomeLink® button to confirm that the garage door opener motor operates. If the garage door opener motor does not operate, repeat the final steps for the rolling code procedure.
Non-Rolling Code Garage Door Opener Final Steps
1. Push and hold the programmed HomeLink® button and observe the HomeLink® indicator light. If the HomeLink® indicator light stays on constantly, programming is complete.
2. Push the programmed HomeLink® button to confirm that the garage door opener motor operates. If the garage door opener motor does not operate, repeat the steps from the beginning.
WARNING!
· Your motorized door or gate will open and close while you are programming the universal transceiver. Do not program the transceiver if people or pets are in the path of the door or gate. (Continued)

WARNING!
· Do not run your vehicle in a closed garage or confined area while programming the transceiver. Exhaust gas from your vehicle contains carbon monoxide (CO) which is odorless and colorless. Carbon monoxide is poisonous when inhaled and can cause you and others to be severely injured or killed.
PROGRAMMING HOMELINK® TO A MISCELLANEOUS DEVICE
The procedure on how to program HomeLink® to a miscellaneous device follows the same procedure as programming to a garage door opener page 47. Be sure to determine if the device has a rolling code, or non-rolling code before beginning the programming process.
NOTE: Canadian Radio Frequency (RF) laws require transmitter signals to time- out (or quit) after several seconds of transmission, which may not be long enough for HomeLink® to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to time-out in the same manner. The procedure may need to be performed multiple times to successfully pair the device to your HomeLink® buttons.
REPROGRAMMING A SINGLE HOMELINK® BUTTO

References

• RSA Help
• Uconnect for Chrysler, FIAT, Jeep, Dodge & RAM | Canada
• Uconnect®: Connected Services for Jeep®, Ram, Dodge and More
• Roadside Aid
• Homelink
• Official Mopar Site | Owner's Manual
• Uconnect for Chrysler, FIAT, Jeep, Dodge & RAM | Canada
• Uconnect®: Connected Services for Jeep®, Ram, Dodge and More
• Uconnect®: Connected Services for Jeep®, Ram, Dodge and More
• dtsc.ca.gov/hazardouswaste/perchlorate
• Official Mopar Site | Owner's Manual
• Child Safety | NHTSA
• P65Warnings.ca.gov/passenger-vehicle
• Safer Car Vehicle Safety, Ratings and Recalls | NHTSA
• Safer Car Vehicle Safety, Ratings and Recalls | NHTSA
• TechAuthority
• TOP TIER - High-quality Fuel Performance Standard - TOP TIER™
• Homelink
• Child car seat safety
• Uconnect® Software Update Center: For Stellantis Vehicles
• McIntosh: Home Audio Systems for Music & Home Theater
• McIntosh Craftsmanship
• Official Mopar Site | Owner's Manual
• Official Mopar Site | Owner's Manual
• TechAuthority

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>