EAPIl E418 Pan-Tilt Home Security Wi-Fi Camera User Guide
- June 10, 2024
- EAPIl
Table of Contents
EAPIl E418 Pan-Tilt Home Security Wi-Fi Camera
FCC
FCC Warning : This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Install Your Camera
Mounting Surface: Wall Anchors, Wall Plate, Wall Screws
- Use the installation sticker to locate and drill holes in the appropriate position.
- Hammer the expansion bolt into the hole.
- Use the installation screw to secure the quick installation plate to the installation surface.
- Align the camera with the quick installation plate and rotate to fix it.
What’s in the Box
- Camera
- USB Cable
- USB Adapter
- Wall Plate
- Wall Screws and anchors
- Mounting Sticker
- Quick Start Guide
Safety Information
- During transportation, storage, and installation, please prevent damage to the product caused by heavy pressure, severe vibration, and immersion, etc.
- Please use the power adapter that comes with the product to power the device.
- Do not disassemble the camera yourself to avoid danger or damage to the camera.
- This model cannot be installed outdoors (including but not limited to corridors, eaves, and courtyards with roofs).
- Do not place the camera in places with oil fumes, extreme temperatures, long-term direct sunlight, or a lot of dust.
- Do not expose the device to rain or use it in wet environments near water.
- Do not aim the camera at strong light (spotlights, direct sunlight) when using it, as it may reduce the life of the photosensitive element.
- The camera’s pan-tilt rotation is operated on the app side. Do not manually rotate the camera’s pan-tilt to avoid damaging the motor.
- When cleaning the camera, you can use a soft cloth dipped in water (or professional lens cleaner) to gently wipe the lens, and then use a dry soft cloth to wipe it dry.
- This product packaging contains plastic bags and small parts. To avoid danger, please keep the product packaging away from infants and young children.
Interfaces Introduction
Power your camera
Use a data cable to connect the Micro USB interface on the back of the
camera to the power socket. When the green light on the camera stays on, it
indicates that the power is connected. Please use the power adapter that comes
with the product to power the device. (Using a different power adapter or not
following the instructions to use the power adapter may cause damage to the
device.)
Light Sensor Mic Light Speaker Reset Button
Micro USB MicroSD Slot: Support maximum 128G MicroSD card.
Warranty Services
Thank you for choosing our product. In order for you to fully enjoy our comprehensive after-sales support, please read carefully and keep safe the warranty card upon purchase. The user can exchange the product for free within 7 days from the date of purchase if there is a quality issue, and the warranty period is one year.
The following are not covered by the warranty:
- Inability to present a valid warranty certificate and purchase receipt.
- Product malfunction due to inappropriate environment or conditions, such as unsuitable power supply, temperature, humidity, lightning, etc.
- Product malfunction caused by accidents, negligence, disasters, improper operation or misuse, cyber attacks, etc.
- Malfunction or damage caused by unauthorized personnel who are not authorized by the company to install, repair, modify or disassemble the product.
- The product is beyond the warranty period specified by the company.
For more questions or suggestions, please visit our official website at www.eapil.com or send an email to support@camtells.com.
Power Your Camera
Use a data cable to connect the Micro USB interface on the back of the camera to the power socket. When the green light on the camera stays on, it indicates that the power is connected. Please use the power adapter that comes with the product to power the device. (Using a different power adapter or not following the instructions to use the power adapter may cause damage to the device.)
Get the App
Download the free Camtells app to get started.
Scan QR Code to download app Open Camtells app, tap to add your camera by following app guides.
Camtells
Open Camtells app, tap to add your camera by following app guides.
Electrical Outlet Hazardous Element Declaration Table
Substance Name| Restricted Substances or Elements in accordance with
Administrative Measures for the Pollution Control of Electronic
Information Products
---|---
Lead (Pb)|
Mercury (Hg)|
Cadmium (Cd)|
Hexavalent Chromium (CrVI)|
Polybrominated Biphenyls (PBB)|
Polybrominated Diphenyl Ethers (PBDE)|
Warranty Card
- Product Name : Pan/Tilt Home Security Wi-Fi Camera
- Product Model : E418
- Date of Sale:
- Distributor:
- User Name:
- Contact Number:
- Email Address:
- User Address :
QUALIFIED CERTIFICATE
(QC): PASS
Install your camera
The device can be placed upright on a desktop for use. When you need to mount or hang the device on a wall, please refer to the following instructions
Hazardous Element Declaration Table
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>