Xtorm FS402 Powerbank 20W 20.000 mAh User Manual

Table of Contents

Xtorm-FS402-Powerbank-20W-20-000-mAh-product

Specifications

Product Overview

Charging Your Device

Compatible Devices: Connect the USB-C end of the charging cable to the USB-C PD output of the Power Bank and the other end to the input of your device. The charging will start automatically.
Charging Cable: Charging some devices requires a charging cable other than the one supplied.

Recharging the Power Bank

Method A: Connect the USB-C end of the charging cable to output 2 of the Power Bank and the USB end to a wall charger.
Method B: For the fastest charging possible use a 20W charger. This will fully recharge the Power Bank within 5 hours.

LED Power Indicator

Method A: Press the Power Button once to display the battery level remaining in the Power Bank via the LED display.
Method B: Each lit LED light indicates 25% of the remaining energy in the Power Bank. At 4 lit lights, the Power Bank is fully charged.

In the Box

FAQ

Q: How long does it take to fully recharge the Power Bank?

A: Using a 20W charger, it will take approximately 5 hours to fully recharge the Power Bank.

Q: How do I know if the Power Bank is fully charged?

A: The LED power indicator will show 4 lit lights when the Power Bank is fully charged.

Xtorm-FS402-Powerbank-20W-20-000-mAh-fig-8

A Connect the USB-C end of the charging cable to the USB-C PD output of the Power Bank and the other end to the input of your device. The charging will start automatically.
B Charging some devices requires a charging cable other than the one supplied E.g. an Apple Lightning® or a Micro USB cable.

Xtorm-FS402-Powerbank-20W-20-000-mAh-fig-9

A Connect the USB-C end of the charging cable to output 2 of the Power Bank and the USB end to a wall charger.
B For the fastest charging possible use a 20W charger. This will fully recharge the Power Bank within 5 hours.

Xtorm-FS402-Powerbank-20W-20-000-mAh-fig-10

A Press the Power Button once to display the battery level remaining in the Power Bank via the LED display.
B Each lit LED light indicates 25% remaining energy in the Power Bank. At 4 lit lights, the Power Bank is fully charged.

TEMPERATURE CONTROL
- Provided with a temperature control chip that prevents overheating.
OVERLOAD PROTECTION
- Protects both the internal battery as well as the battery of the attached device from overcharging.
SECURED POWER MANAGEMENT
- Automatically picks the correct charging speed and efficiently divides power between attached devices.
SHORT CIRCUIT PROTECTION
- Breaks the circuit automatically when an overcurrent is detected.
- This protects the Xtorm charger and your device from short-circuit damage.
A-CLASS BATTERY CELLS
- We only use the best battery cells that provide the fast charging you need and meet all safety requirements.
HIGH EFFICIENCY
- Our power products are built to power your device as efficiently as possible.
- This ensures the least possible loss of energy during the charging process.

Warnings

Don’t drop, disassemble, or attempt to repair the charger by yourself.
Avoid exposure to water or high humidity. Don’t be exposed to any heat source. Keep out of reach of children.
Don’t use it in the presence of flammable gas. The warranty will lapse in the event of improper use.
Telco Accessories has tested the product in a test environment.
All statements/declarations made by Telco Accessories about the (operation) of the product are based on the results obtained from such tests.
These results/statements/declarations cannot be guaranteed, for example in cases of deviating or injudicious use and/or use in a different environment.