nVent CADDY CRLN37EG Rod Lock Nut Owner’s Manual
- June 16, 2024
- nVent Caddy
Table of Contents
nVent CADDY CRLN37EG Rod Lock Nut
Product Information
Specifications
Catalog Number| Material| Finish| Rod Size (RS)| Width (W)| Height (H)| Wrench
Size| Torque (TQ)| Static Load (F)
---|---|---|---|---|---|---|---|---
CRLN37EG| Steel| Electrogalvanized| 3/8″| 1.100″| 0.800″| 15/16″| 5 ft lb|
1,350 lb
Features
- Easy push-to-install design allows installers to simply push the threaded rod through the mounting hole, instantly holding it in position
- Fast installation onto long threaded rods – push the nut in place instead of threading it up the rod
- Excellent alignment and easy fine adjustment by spinning the nut
- Extremely useful in tight spaces where wrenches are difficult to use
Product Usage Instructions
Installation
- Select the appropriate size of nVent Caddy Rod Lock Nut for your threaded rod.
- Ensure that the mounting hole is clean and free from any debris.
- Insert the threaded rod through the mounting hole.
- Push the nVent Caddy Rod Lock Nut onto the threaded rod, applying enough force to securely hold it in position.
Fine Adjustment
If you need to make fine adjustments to the alignment of the threaded rod, follow these steps:
- Hold the threaded rod in place to prevent it from rotating.
- Spin the nVent Caddy Rod Lock Nut in the desired direction to achieve the desired alignment.
Tight Spaces
If you are working in tight spaces where wrenches are difficult to use, the nVent Caddy Rod Lock Nut provides an easier alternative for installation and adjustment. Simply push the nut into place instead of threading it up the rod, and use the spinning feature for fine adjustments.
FAQ (Frequently Asked Questions)
- Q: Where can I find nVent’s product instruction sheets?
- A: Instruction sheets are available at www.nvent.com and from your nVent customer service representative.
- Q: What should I do if I encounter a product malfunction or property damage?
- A: If you experience any issues with the product or encounter property damage, please stop using it immediately and contact nVent’s customer service for assistance.
- Q: Can I use this product with rods of different sizes?
- A: The nVent Caddy Rod Lock Nut is designed for use with 3/8″ rods. Using it with rods of different sizes may not provide proper functionality.
- Q: Can I change the alignment of the threaded rod after installing the nut?
- A: Yes, you can easily make fine adjustments to the alignment by spinning the nVent Caddy Rod Lock Nut.
- Q: What is the maximum load that this product can support?
- A: The nVent Caddy Rod Lock Nut has a static load capacity of 1,350 lb.
FEATURES
- Easy “push-to-install” design allows installers to simply push the threaded rod through the mounting hole, instantly holding it in position
- Fast installation onto long threaded rods – push the nut in place instead of threading it up the rod
- Excellent alignment and easy fine adjustment by spinning the nut
- Extremely useful in tight spaces where wrenches are difficult to use
SPECIFICATIONS
Catalog Number|
Material
|
Finish
|
Rod Size(RS)
|
Width(W)
|
Height(H)
|
Wrench Size
|
Torque(TQ)
| Static Load(F)
---|---|---|---|---|---|---|---|---
|
Steel
| Electrogalva sized|
3/8″
|
1.100″
|
0.800″
|
15/16″
|
5 ft lb
|
1,350 lb
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty.
CONTACT
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands:
- +31 800-0200135
- France:
- +33 800 901 793
Europe
- Germany:
- 800 1890272
- Other Countries:
- +31 13 5835404
APAC
- Shanghai:
- + 86 21 2412 1618/19
- Sydney:
- +61 2 9751 8500
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent