blinds2go b2g enjoy 26 Roller Blinds Installation Guide
- June 16, 2024
- blinds2go
Table of Contents
blinds2go b2g enjoy 26 Roller Blinds
Fitting The Brackets
Use the single hole in the top of the bracket to fix to the lintel (the
‘ceiling’ of the recess). The protruding tab on the bracket should be closest
to the window.
Note that the position of the outermost brackets should be at least 5cm away
from the ends of the rail, with any other brackets evenly distributed across
the width.
For safety reasons, always ensure that the top of the blind is installed at
least 150cm (1500mm) from the floor.
Fitting The Blind
Situate the front lip of the headrail into the front of the bracket.
Push the back of the headrail upwards to lock it into the back of the bracket.
To release the blind from the brackets at any point after installing, push up
firmly against the tab protruding from the back of the bracket. At the same
time, twist the back of the headrail downwards to disengage it at the back.
Child Safety
Cord Tensioner
The cord retaining device must be installed at the maximum distance possible
from the control mechanism to prevent looped cords from becoming slack.
Place the retaining device on the wall and mark the position of the screw
hole(s) with a pencil.
Attach the retaining device to the wall using the fixings provided.
Young children can be
strangled by loops in pull cords, chains, tapes and inner cords that operate
the product.
To avoid strangulation and entanglement, keep cords out of the reach of young
children. Cords may become wrapped around a child’s neck.
Move beds, cots and furniture away from window covering cords.
Do not tie cords together.
Make sure cords do not twist and create a loop.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>