KVG-DW Series 120W Dimmable LED Driver

Product Information

Specifications

• Model: KVG-DW Series 120W

• Whole Family: KVG-XXXXX-DWJ 12V/ 24V DC – [ 30W 60W 80W 96W
  100W 120W 150W 200W 300W 600W ]

• Output Range: Constant Voltage

• Input Voltage Range: 100-277VAC

• PFC design: Built-in active PFC function

• Efficiency: Up to 84%

• Protections: Short circuit/overload/over temperature

• Heat dissipation: Cooling by free air convection

• Waterproof performance: Suitable for dry, damp, wet
  locations

• Dimming function: Phase dimming (work with forward phase, MLV
  and Reverse phase, ELV, TRIAC dimmers) and 0-10V dimming
  (0-10V/1-10V/Potentiometer/10V PWM)

• Dimming range: 0-100%

• Application: Suitable for LED lighting and moving sign
  applications

• Warranty: 5 years

Product Usage Instructions

Installation

1. Ensure that the input voltage is within the specified range of
   100-277VAC.

2. Connect the input wires to the corresponding AC power
   source.

3. Connect the output wires to the LED lighting or moving sign
   application.

4. Make sure all connections are secure and insulated.

Dimming Function

The dimmable LED driver supports both phase dimming and 0-10V
dimming.

Phase Dimming

To use phase dimming, follow these steps:

1. Ensure that the LED driver is connected to a compatible forward
   phase, MLV, or reverse phase, ELV, TRIAC dimmer.

2. Turn on the AC power source.

3. Use the dimmer control to adjust the brightness of the LED
   lights or moving sign.

0-10V Dimming

To use 0-10V dimming, follow these steps:

1. Ensure that the LED driver is connected to a compatible 0-10V
   dimmer, 1-10V dimmer, potentiometer, or 10V PWM dimmer.

2. Turn on the AC power source.

3. Adjust the dimmer control within the range of 0-10V to achieve
   the desired brightness level.

FAQ (Frequently Asked Questions)

Q: What is the input voltage range for this LED driver?

A: The input voltage range is 100-277VAC.

Q: What types of dimmers are compatible with this LED

driver?

A: This LED driver is compatible with forward phase, MLV, and
reverse phase, ELV, TRIAC dimmers for phase dimming. It is also
compatible with 0-10V dimmers, 1-10V dimmers, potentiometers, and
10V PWM dimmers for 0-10V dimming.

Q: Can I use this LED driver in wet locations?

A: Yes, this LED driver has waterproof performance and can be
used in dry, damp, and wet locations.

Q: What is the warranty period for this LED driver?

A: This LED driver comes with a 5-year warranty.

Triac/0-10V/1-10V/Potentiometer/10V PWM 5 in 1 Dimmable LED driver 120W
KVG-DW Series 120W
Whole Family: KVG-XXXXX-DWJ 12V/ 24V DC – [ 30W 60W 80W 96W 100W 120W 150W 200W 300W 600W ]

Features
Output: Range: PFC design: Efficiency: Protections: Heat dissipation: Waterproof performance: Dimming function:
Dimming range: Application: Warranty:

Constant Voltage 100-277VAC Built-in active PFC function Up to 84% Short circuit/ over load/ over temperature Cooling by free air convection For dry, damp, wet locations Phase dimming: work with forward phase, MLV and Reverse phase , ELV, TRIAC dimmers. 0-10V dimming: 0-10V/1-10V/Potentiometer/10V PWM 4 in 1 0-100% Suitable for LED lighting and moving sign applications 5 years warranty

1/6 A/0

Triac/0-10V/1-10V/Potentiometer/10V PWM 5 in 1 Dimmable LED driver 120W

Specification

Model
Certificate Output
Input
Protection Environment Safety & EMC
Others Notes

KVG-12120-DWJ

KVG-24120-DWJ

UL / cUL / FCC / CE / Rohs / REACH

DC Voltage

12V

24V

Voltage Tolerance

±0.5V

Voltage Regulation

±0.5%

Rated current

10A

5A

Rated power

120W

Load Regulation

±2%

±1%

Voltage Range

100-277VAC

Frequency Range

47 – 63Hz

Power Factor (Typ.) @ full load

0.99@120VAC 0.96@277VAC

0.98@120VAC 0.95@277VAC

THD(Typ. ) @ full load

<20%@120VAC & 277VAC

Efficiency(Typ.) @ full load 82%@120VAC 83%@277VAC

82%@120VAC 84%@277VAC

AC Current (Max.)

1.7A

Inrush Current (Typ.)

20A, 50%, 1.6ms @120VAC; 25A, 50% 1.2ms @277VAC

Leakage current

<0.5mA

Short Circuit

Shut down o/p voltage, re-power on to recover after fault condition removed

Over Load

120% constant current limiting, auto-recovery after fault condition removed

Over temperature

100±10 shut down o/p voltage, automatically recover after cooling

Working TEMP.

-40~+60 (see below derating curve)

Working Humidity

20 – 95%RH non-condensing

Storage TEM.,Humidity

-40 – +80,10 – 95% RH non-condensing

TEMP.coefficient

±0.03%/(0 – 50)

Vibration

10~500Hz, 5G 12min./1 cycle, period for 72min. each along X,Y,Z axes

Safety standards

UL8750 , CAN/CSA-C22.2 No.250.13

Withstand voltage

I/P-O/P: 1.8KVAC I/P-FG: 1.8KVAC O/P-FG1.8KVAC

Isolation resistance

I/P-O/P: 100M/ 500VDC/ 25/ 70% RH

EMC Emission

FCC 47 CFR Part 15 ,Subpart B

Net Weight

1.364Kg

Dimension

22095.443.8mm(LWH)

Packing

298265220mm 10pcs /CTN

1. All parameters NOT specially mentioned are measured at 120VAC input, rated load and 25of ambient

temperature. 2. Tolerance: includes set up tolerance and load regulation .

2/6 A/0

Triac/0-10V/1-10V/Potentiometer/10V PWM 5 in 1 Dimmable LED driver 120W
Efficiency Curve (efficiency vs output load)
Derating Curve (output load vs TEMP.)
To extend their life, please refer to the Derating Curve and derate according to the temperature.
Power factor curve
3/6 A/0

Triac/0-10V/1-10V/Potentiometer/10V PWM 5 in 1 Dimmable LED driver 120W
Mechanical Specification

12V & 24V Version
1. Input cable 318AWG, the Green cable to (FG), Black cable to L, and White cable to N of Mains AC 2. Output cable 216AWG, Red cable (+) to LED Positive side (+) , Black cable (-) to LED Negative side (-). 3. Dimming cable 2*18AWG, Purple cable DIM (+) to 0/1-10V dimmer signal(+ ), Pink cable DIM (-) to 0/1-10V dimmer signal (-) 4. Please DO NOT connect “DIM-” to “LED-“, “DIM+” to ” LED+”, or other incorrect connection. 5. Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.
Warm tips: 1. Recommended Max. Carrying Current (A) = wire diameter(mm²) x 10A/mm ²
For example: 1mm ² output cable, Recommended Max. Carrying Current (A) = 1mm ² x 10A/mm ²=10A 2. Any other requests for, we can customized.

Dimming Operation and Connecting Diagram

4/6 A/0

Triac/0-10V/1-10V/Potentiometer/10V PWM 5 in 1 Dimmable LED driver 120W Using two ways of dimming at the same time, you must be assured that LED lighting is up to the max. Brightness then
you could operate with the other dimming;
Using one dimming —TRIAC/Phase cut dimming
1. The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer or lighting system.
2. Working with forward phase, MLV and Reverse phase , ELV, TRIAC dimmers or light system. 3. Min. loading is about 10% 4. Please try to use dimmers with power at least 1.5 times as the output power of the driver.
Using one dimming —0-10/ 1-10V/ 10V PWM/ Potentiometer dimming
5/6 A/0

Triac/0-10V/1-10V/Potentiometer/10V PWM 5 in 1 Dimmable LED driver 120W
Instruction
1. This driver should be installed by qualified and professional person. 2. Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation. 3. Ensure that wiring is correct before test in order to avoid light and power supply damage. 4. If driver Cannot work normally, don’t maintain privately.
6/6 A/0

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>