BRILONER MAL 3765 PULA Battery Powered LED Outdoor Wall Lamp Instruction Manual
- June 16, 2024
- BRILONER
Table of Contents
BRILONER MAL 3765 PULA Battery Powered LED Outdoor Wall Lamp
Product Information
Specifications
- Model: MAL 3765
- Revision: 00_05/2023
- Manufacturer: Briloner Leuchten GmbH & Co. KG
- Address: Am Steinbach 14, D-59872 Meschede
Product Usage Instructions
1. Cleaning
Use a dry and lint-free cloth for cleaning.
2. Electric Shock Risk
Before connecting to the mains, always check the entire light for possible damage. Do not use the light if you notice any damage.
3. Mounting Precautions
Before drilling the mounting holes, ensure that no gas, water, or electricity pipes and wires can be drilled through or damaged in your chosen mounting location.
4. Proper Installation
When mounting, ensure that the attachment material is suitable for the subsurface and capable of carrying the weight of the fixture. Improper installation may void the manufacturer’s liability.
5. Disposal
The symbol of the crossed-out garbage can on the product or packaging indicates that the product must not be disposed of with ordinary household waste.
FAQ
Q: What should I use to clean the product?
A: Use a dry and lint-free cloth for cleaning.
Q: How do I ensure safe mounting?
A: Before drilling, make sure there are no gas, water, or electricity pipes and wires in the area. Also, use suitable attachment material and ensure the subsurface can carry the weight of the fixture.
Q: How should I dispose of the product?
A: The product must not be disposed of with ordinary household waste. Please follow appropriate disposal methods in your local area.
Mounting instructions
Safety Instruction
Safety directions / Please read this information carefully before installing or using this product. Please keep this user manual for further reference.
- The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
- Maintenance of the lights is limited to the surfaces. For electrical safety reasons, this product must not be cleaned with water or other liquids. Use only a dry, lint-free cloth for cleaning.
- Caution! Risk of electric shock. Before connecting to the mains, always check the entire light for possible damage. Never use the light if you notice any damage.
- Caution! Before drilling the mounting holes, make sure that no gas, water or electricity pipes and wires can be drilled through or damaged in your chosen mounting location.
- When mounting, ensure that the attachment material is suitable for the subsurface and that this surface is capable of carrying the weight of the fixture. The manufacturer is not liable for improper installation of the item on the relevant subsurface.
- The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed with ordinary household waste. At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic device. Please ask your local municipality for the point of acceptance. Disposing of this product in line with local regulations helps to mitigate the effects on the environment and health which might otherwise occur as a result of hazardous substances, combinations or components.
- Please make sure that no cables get damaged during the installation work. This product is intended for normal operation and may only be used for wall mounting.
- The lights have a protection class rating of “IP44“ and are approved for use in the exterior areas of private households. IP degree of protection applies for wall mounting only.
- Do not look directly into the light source (illuminant, LED, etc.).
- The included or insertable LED light bulb contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- This product contains a light source of energy efficiency class „F“, based on the EU regulation 2019/2015.
- LED colour deviation when using different chargers may occur. The light colour and luminous strength of the LED’s can also change as a result of life span level from the lamp.
- Batteries or rechargeable batteries are not permitted in domestic waste. They must be decontaminated according to the regulations of the responsible authorities as hazardous waste. Use the available collection points. The following batteries and rechargeable cells are included with this electrical device: Battery type: “18650” /Chemical composition: “Li-Ion“ . Before disposing of the device, ensure the battery or cell is completely drained.
- The switch “ON/OFF“ switches the light on or off. The integrated USB socket does not have data function and is only provided to connect the device to the power supply.
- Light with motion detector: The light of the LED on sensing movement lasts ca. “20“ seconds and is extended during this period by the same amount each time it senses another movement.
- The motion sensor responds to differences in temperature within the detection zone. Hence avoid the following conditions during installation:
- Do not aim the sensor at objects with highly reflective surfaces such as mirrors or similar. / b. Do not aim the sensor at objects which may move in the wind such as curtains, large plants or similar. / c. Do not install in the vicinity of objects that give out warmth such as air vents, air-conditioning units, light fittings or similar. / d. The motion sensor should preferably be installed in a place protected from rain and direct sunlight.
- The detection sensitivity depends on the direction of the movement to be detected. Running laterally past the sensor results in a high activation sensitivity. Running directly up to the sensor results in a low activation sensitivity.
- The detection sensitivity depends on the temperature of the surrounding area. Low temperatures result in a high sensitivity. High temperatures result in a low sensitivity. This can have an influence on the scope of detection.
- The product must be mounted and oriented in such a way that the motion detector can capture the area to be monitored without interfering obstacles. The sensor’s scope of detection is between “2m“ and “8m“. The installation height should preferably be adjustable between “1,5“ metres and “2,5“ metres. The angle of detection is “100 °“. The movement sensor is activated in illumination of ca. “≤25“ Lux.