niko 353-700111 Motion Detector Installation Guide
- June 4, 2024
- niko
Table of Contents
Manual
Motion detector 353-700111 4 year warranty
Motion detector M42LR, 230 V, master, 32-37 m, 360°, for flush-mounting
box
**Wiring
**
230 V – OFF
- Remove if you want to use the contact as a dry contact (potential-free).
This product must be secured with a miniature circuit breaker (MCB) of max. 16 A in the electrical cabinet, limited by national installation rules.
Dimensions
Installation
Installation
|
---|---
|
|
---|---
App settings
| | |
---|---|---|---
Factory settings| Switch ON/OFF| 500 lux| 15 min
LED behavior
| Green LED continuously on | Connection OK | 1 | |
|---|---|---|---|
| Green LED breathing | Connection OK, overrule ON | 1 | |
| Green LED flashing | Warming up | Wait | |
| Red LED continuously on | Error | 
Red LED breathing| | Warning
Blue LED flashing| | Walk test active
Specifications
| A+D9:E42rticle number | 353-700111 |
|---|---|
| Configuration | 230 V Master |
| Input voltage | 230 Vac ± 10 %, 50 Hz |
| Maximum power consumption | 0.2 W |
| Circuit breaker (*) | maximum MCB rating C16 |
| Relay contact | NO (max. µ10 A), potential-free |
| Maximum load incandescent and halogen lamps (cosφ = 1) | 2300 W |
| Maximum load fluorescent lamps (cosφ ≥ 0.5) | 1200 VA |
| Maximum load economy lamps (CFLi) | 350 W |
| Maximum load LED lamps 230 V | 350 W |
| Maximum load LED driver | 500 VA |
| Maximum load electronic transformer | 500 VA |
| Maximum capacitive load | 140 µF |
| Maximum switching current | 165 A/20 ms or 800 A/200 µs |
| Light intensity range | 20 – 2000 lux, ∞ |
| Number of channels | 1 channel |
| Switch-off delay | pulse, 15 s – 120 min, ∞ |
| Hysteresis on light intensity | 10% |
| Detection angle | 360° |
| Detection range (PIR) | Ø 37 m from a height of 3 m |
| Ambient temperature | -25 – +40 °C |
| Mounting method | flush-mounting box |
| Mounting height | 2 – 3.5 m |
| Colour | white (RAL 9010) |
| Dimensions visible (HxWxD) | 100 x 100 x 42.2 mm |
| Dimensions (HxWxD) | 100 x 100 x 77.2 mm |
| Wire capacity | 1.5/2.5 mm² |
| Maximum range Bluetooth ® (free field, depending on the device) | 50 m |
| Operating frequency | 2.4 GHz |
| Maximum radio frequency power | -2 dBm |
| Protection degree | IP20 |
| Impact resistance | IK04 |
| Modification of settings | app (iOS/Android) and 2-way Bluetooth® communication |
| Halogen-free | yes |
| Marking | CE |
Detection area
Troubleshooting
| Problem | Possible cause | Proposed solution |
|---|---|---|
| Load does not turn on | The wiring is not correct The ambient light is too | |
| strong | Check the wiring scheme Check the response value luminosity and raise |
the value if necessary
Load does not turn off| The switch-off delay is too long
The detector receives false triggers| Check the switch-off delay and shorten
the delay if necessary Check for any objects that may cause
false triggering and remove them from the detection range or lower the
sensitivity
App cannot connect to the detector| Bluetooth ® has been disabled on your
mobile
device| Enable Bluetooth ® on your mobile device
Support & contact
Niko
Industriepark West 40
9100 Sint-Niklaas, Belgium www.niko.eu
| +32 3 778 90 80 | support@niko.eu |
|---|
Niko prepares its manuals with the greatest care and strives to make them as complete, correct and up to date as possible. Nevertheless, some deficiencies may subsist. Niko cannot be held responsible for this, other than within the legal limits. Please inform us of any deficiencies in the manuals by contacting Niko customer services at support@niko.eu.