tuya DY82011 Smart LED Lampen Instructions

tuya DY82011 Smart LED Lampen

Product Information

Specifications

• Controlling method: APP/IR Type/key board type
• Working temperature: -20 degrees to +60 degrees
• Power: 1.5W/Piece
• Power supply voltage: DC5V (Each DC5V 2A power supply can load 15pcs modules, if need more modules)
• Applied places: study room, living room, bedroom, night club or bar, KTV, gym, music bar or restaurant, coffee shop, and other home and commercial places

Installation Instructions

1. Remote control IR-Receiver
2. Scene Music Lamps
3. Charging port
4. Connector Scene Music Lamps

Safety Precautions

1. Before use, please confirm whether the voltage conforms to the working voltage of this product. Improper use of voltage may damage the product and bring safety hazards.
2. Do not disassemble the scene music lamp module by yourself.
3. The product will generate heat during operation, please keep the surrounding air convection to allow good heat dissipation.
4. Do not use non-standard power adapters to avoid product damage or causing safety hazards.

Product Features

1. Support WiFi 2.4GHz 802.11 b/g/n wireless network.
2. Support remote/local control through 2G/3G/4G/Wi-Fi networks.
3. The main account can be shared with other accounts (subaccounts) (only 6 mobile phones).

How to Connect with the App?

1. Turn on both Bluetooth and WiFi on your cell phone. And download the app Tuya.
2. Click Add device in the app to enter the search status.
3. Turn on the lightbar. Press and hold the power button on the control-box for about 5 seconds. Then the lightbar will appear in your app.
4. Click Add in the App.
5. Enter your home Wi-Fi information to complete the connection.

Notes on the Remote Control:

1. It must be facing the IR-Receiver.
2. Make sure that there are no obstacles in the middle.

Ways to Operation

Manual Control by 3 Buttons:

• ON/OFF: Turn the light on or off.
• M: Dynamic Modes.
• : Music Modes.

Connect your Echo to your Smart Life System

Control Smart Life devices with Alexa Voice control phrase:

Explanation: Firstly, you should say “Alexa” to wake Alexa. If it wakes, you will see the blue LED light lighten up around Alexa.
You may use “turn on” to open some device. Use “turn off” to close some device. And at last, you should say the name of the device you want to control.

Try out these phrases ({Device Name} should be the name of your device):

• ON: “Alexa, turn on light {Device Name}”. When you hear response “OK” means control successfully.
• OFF: “Alexa, turn off light {Device Name}”.
• Dimming: “Alexa, set light {Device Name} to 80 percent”, “Alexa, dim light {Device Name} to 50 percent”, “Alexa, dim light {Device Name} by 100 percent”.
• Color changing: “Alexa, set light {Device Name} to blue”.

Please read this manual carefully before using the Product and keep it for records properly.

FAQ

Q: What is the power supply voltage for the product?
A: The power supply voltage for the product is DC5V.

Q: Can I use non-standard power adapters with the product?
A: No, it is recommended not to use non-standard power adapters as it may cause product damage or safety hazards.

Q: How many mobile phones can be connected to the main account?
A: Only 6 mobile phones can be connected to the main account.

Instruction

Basic parameters :

• Controlling method : APP/IR Type/key board type
• Working temperature : -20degrees to + 60degrees
• Power : 1.5W/Pice Power supply voltage : DC5V

(Each DC5V 2A power supply can load 15pcs modules,if need more modules.
Applied places:study room,living room,bedroom,night club or bar,KTV, gym,music bar or restaurant, coffee shop and other home and commercial places.

Installation instructions

1. Please make a model layout plan in advance or pre-manufacture the model on the desktop, and define the position of the drive control line entrance.
2. Remove the release paper on one side of the double-sided non-marking adhesive, stick the double-sided adhesive to the center of the back of the module, and remove the release paper on the other side of the non-marking adhesive before installation. (This step is omitted for desktop installation)
3. First locate the drive control line entrance module, then insert the arrow pointing end of the connecting piece (NEXT end) into the cascade module, and insert the “PRE” end of the connecting piece into the previous module according to the sequence of the modeling plan to complete the installation.
4. Insert the USB end of the drive control line into the first module, and then plug the other end of the drive control line into any signal output port corresponding to the pickup, and power the power adapter ta complete the installation.

Safety Precautions

1. Before use, please confirm whether the voltage conforme to the working voltage of this product. Improper use of voltage may damage the product and bring safety hazards.
2. Do not disassemble the scene music lamp module by yourself.
3. The product will generated heat during operation, please keep the surrounding air convection to allow good heat dissipation.
4. Do not use non-standard power adapters to avoid product damage or causing safety hazards.

Packing spare parts

• Scene Music Lamps
• Sound controlling system
• IR renote control
• USB cable
• Double sided sticker
• Connector

DIY any assembly style

Please read carefully before using the product >>

Product Features

1. 1. Support WiFi 2.4GHz 802.11 b/g/n wireless network.
   2. Support remote/ local control through 2G / 3G /4G / Wi-Fi networks.
   3. The main account can be shared with other accounts subaccounts). (only 6 mobile phones)

   • Working temperature:-10℃-45℃(140°F-113°F)
   • Humidity:≤80%RH
   • Working environment: Indoor

How to connect with the App?

1. Turn on both Bluetooth and WiFi on your cell phone. And download the app “Tuya”.
2. Click “Add device” in the app to enter the search status.
3. Turn on the lightbar. Press and hold the power button on the control-box for about 5 seconds. Then the lightbar will appear in your app.
4. Click “Add” in the App.
5. Enter your home wi fiinformation to complete the connection

Notes on the remote control:

1. It must be facing the IR-Receiver.
2. Make sure that there are no obstacles in the middle.

ways to Operation

Manual Control by 3 Buttons

• : ON/OFF
• M : Dynamic Modes.
• : music Modes.

Connect your Echo to your Smart life System

1. Open Alexa APP, click Alexa
2. Land Alexa.
3. Click on the bottom right corner Devices.
4. Click on’ Add Decice’.
5. Click on light.
6. Click on “Tuya’.
7. Click on’DISCOVER DEVICES’, (8)Waiting for search device.
8. Click on light.
9. Select the lighting equipment to be controlled.
10. Device color control interface. (12)Equipment control interface.
11. Device color control interface.
12. Equipment control interface.

Control Smart life devices with Alexa Voice control phrase:

Explanation:
Firstly, you should say “Alexa” to wake Alexa if it wakes.you will see the blue LED light lighten up around Alexa.
You may use “turn on” to open some device.Use “turn off” to close some device.
And at last, you should say the name of the device you want to control.

Try out these phrases ({Device Name} should be the name of your device):
Take lightbulb as an example by the name of “light” {Device Name}

1. ON: “Alexa.turn on light{Device Name}” . when you hear response “OK” means control successfully

2. OFF: “Alexa, turn offlight{Device Name}”

3. Dimming:
   D”Alexa,set light{Device Name}to 80 percent”
   2″Alexa, dim light{Device Namejto 50 percent”
   3″Alexa, dim light{Device Namejby 100 percent”

4. Color changing:
   “Alexa, set light {DeviceName)to blue”

WARNING
Please read this manual carefully before using the Product, and keep if for records properly.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>