Briloner MAL 2276 Wall Lamp Motion Detector Instruction Manual
- June 16, 2024
- BRILONER
Table of Contents
Briloner MAL 2276 Wall Lamp Motion Detector
Product Information
Specifications:
- Model : MAL 2276
- Manufacturer : Briloner Leuchten GmbH & Co. KG
- Revision : 03_11/2022
Product Usage Instructions
Safety Precautions
- The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
- Maintenance of the lights is limited to the surfaces. For electrical safety reasons, this product must not be cleaned with water or other liquids. Use only a dry, lint-free cloth for cleaning.
- Before drilling the mounting holes, make sure that no gas, water, or electricity pipes and wires can be drilled through or damaged in your chosen mounting location.
- When mounting, ensure that the attachment material is suitable for the subsurface and that this surface is capable of carrying the weight of the fixture. The manufacturer is not liable for improper installation of the item on the relevant subsurface.
FAQ (Frequently Asked Questions)
- Q: Can I clean the product with water?
- A: No, for electrical safety reasons, this product must not be cleaned with water or other liquids. Use only a dry, lint-free cloth for cleaning.
- Q: How should I dispose of the product?
- A: The product should not be disposed with ordinary household waste. It should be taken to a dedicated collection point for recycling of electrical and electronic equipment.
Mounting instructions
Safety directions
Please read this information carefully before installing or using this product. Please keep this user manual for further reference.
- The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
- Maintenance of the lights is limited to the surfaces. For electrical safety reasons, this product must not be cleaned with water or other liquids. Use only a dry, lint-free cloth for cleaning.
- Caution! Before drilling the mounting holes, make sure that no gas, water, or electricity pipes and wires can be drilled through or damaged in your chosen mounting location.
- When mounting, ensure that the attachment material is suitable for the subsurface and that this surface is capable of carrying the weight of the fixture. The manufacturer is not liable for improper installation of the item on the relevant subsurface.
- The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed with ordinary household waste. At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic device. Please ask your local municipality for the point of acceptance.
- The lights have a protection class rating of “IP54“ and are approved for use in the exterior areas of private households.
- Do not look directly into the light source (illuminant, LED, etc.).
- The light source of this lamp is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- LED color deviation when using different chargers may occur. The light color and luminous strength of the LEDs can also change as a result of the life span level of the lamp.
- Before the initial operation of the light, the protective strips must be removed from the battery compartment.
- Batteries or rechargeable batteries are not permitted in domestic waste. They must be decontaminated according to the regulations of the responsible authorities as hazardous waste. Use the available collection points.
Hotline : 00800/BRILONER (00800/27456637) Briloner Leuchten GmbH & Co. KG / D-59872 Meschede.
Disposal Instructions
The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed with ordinary household waste. It should be taken to a dedicated collection point for recycling electrical and electronic equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>