METRO MOBILITY Electric Wheelchairs for Adults Instruction Manual

: May 15, 2024
: METRO MOBILITY

Table of Contents

RECYCLING AND DISPOSAL
READ BEFORE UNPACKING
Package Contain
UNFOLD WHEELCHAIR
INSTALL CONTROLLER
INSTALL BATTERY
INSTALL AND DISMANTLE ANTI-TIPPER
ARMREST FLIP-UP
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

METRO MOBILITY Electric Wheelchairs for Adults

METRO MOBILITY Electric Wheelchairs for Adults

RECYCLING AND DISPOSAL

Cardboard may be recycled. Dispose of foam in accordance with state or local ordinances.

READ BEFORE UNPACKING

Apparent Loss or Damage Upon receipt of this shipment, if any evidence of loss or damage is revealed through visual inspection, then it must be noted on the freight bill and signed by the carrier’s agent. Failure to do this may result in the carrier’s refusal to honor loss or damage claim. The carrier will furnish you with the necessary forms to file the claim.

Concealed Loss or Damage
When loss or damage is not apparent until the unit is unpacked, a claim for concealed loss or damage is required. When damage is discovered, make a written statement to the carrier for inspection.This request must be made within 48 hours of delivery. Keep all cartons and fillers for inspection. Carrier will furnish inspection report and necessary forms to file concealed loss or damage claim, since such damage or loss is the carrier’s responsibility.

Package Contain

Anti-tipper
Controller
Battery Box
External Charger
Owner’s Package

NOTE: Make sure wheelchair delivery is complete by using the component key above.

UNFOLD WHEELCHAIR

Fully unfold the wheelchair, and then fasten the lock which under the backrest.

Unfold Wheelchair

INSTALL CONTROLLER

Insert the controller into armrest tube.And then lock the screw.

Install Controller

INSTALL BATTERY

Put battery groove in the back tube loosen the screw . Then connect the battery plug with controller plug .

Install Battery

INSTALL AND DISMANTLE ANTI-TIPPER

Press the button to install / dismantle the anti-tipper.

Install And Dismantle Anti-tipper

Push the freewheel lever down to disengage the drive motor (freewheel mode)and position the wheelchair close to a standard electrical outlet.

Install And Dismantle Anti-tipper

ARMREST FLIP-UP

One hand press the armrest button,another hand flip up the armrest. And press down the armrest to the proper position to fix armrest.

Fully charge the batteries prior to use. Battery and controller charger port options. Refer to the owner’s manual for complete charging instructions.

Armrest Flip-up

Symbol This Quick Start Guide offers basic information on initial wheelchair setup only. Read the owner’s manual and all supplemental information thoroughly before operating the wheelchair for information on safety, battery charging, basic operation, comfort adjustments, disassembly, and care and maintenance.