ELECOM M-RT1BRXBK Wireless Trackball Mouse User Guide
- June 16, 2024
- ELECOM
Table of Contents
ELECOM M-RT1BRXBK Wireless Trackball Mouse User Guide
Name and function of each part
- Left button
- Right button
- Wheel/Power indicator light The LED blinks red when the battery level is low.
- “Back” button Operates the “Back” button on the Web browser.
- “Forward” button Operates the “Forward” button on the Web browser.
- Trackball Rotate using your fingertips to move the cursor.
- Volume up
- Volume down
- Previous track
- Next track
- Play/pause
- Power Switch
- Pointer speed change button/ Pairing button
- Each time the button is pressed, the count number (movement speed of the cursor) switches between three stages. When the count number is changed, the current count number is shown by the number of times the LED light blinks. one blink 500 dpi two blinks 1000 dpi three blinks 1500 dpi
- Pair the mouse with your device’s Bluetooth® module or a Bluetooth® adapter.
- Battery cover
- Optical sensor (reverse side of ball)
- Ball removal hole Remove the ball to clean the inside of the compartment.
- Battery-storage compartment
- Strap hole
Insert the batteries
- Remove the battery cover.
- Insert the batteries as instructed. Insert with the correct battery plus and minus orientation.
- Reattach the battery cover to its original state.
Turning the Power On
Slide the power switch on the side of the product to the ON position.
Slide the switch to the left to reveal the blue indicator. The power indicator
light will light up red for a period of time. When remaining battery is low,
the LED blinks red for a fixed time.
Power-saving mode
When the mouse is left untouched for a fixed period of time while the power is
ON, it automatically shifts to power-saving mode. The mouse is released from
the power-saving mode when it is touched. Mouse operation may be unstable for
a few seconds after returning from the power-saving mode.
Pairing with a PC
- Pairing involves registering Bluetooth® devices (in this case, this product and your device) with each other, and authorising a connection between them.
- This section covers Windows® and Macintosh standard Bluetooth functions. Depending on your device or Bluetooth* adaptor, unique Bluetooth® functions may be used. Please read the respective manuals for each function. Please carry out the pairing operation using your current mouse or touchpad on your device.
Windows® 10
If your computer does not support Bluetooth® 4.0 or if you have upgraded from
Windows® 8.1 or Windows® 7, please use a Bluetooth® adapter compatible with
Bluetooth® 4.0
-
Click on the “Start” button on the lower left of the screen, and click on the “Settings” . Click on “Devices” on the “Windows Settings” screen.
-
Click on “Devices”.
The “Devices” page will appear. -
Click on “Bluetooth & other devices”, and click on “Add Bluetooth or other device”.
-
Click “Bluetooth”.
-
When the “Add a Pairing button device” pageappears, hold down the pairing button on the side of the product for around 5 seconds, and then release.
The product will be in pairing mode and the battery indicator light will blink red. -
Click “ELECOM Relacon”. Start pairing.
-
When it changes to “Connected” click on “Done”.
-
This product is added to “Mouse, keyboard, & pen”, displays “Connected ” and pairing is complete.
Windows® 7
Please purchase an adapter compatible with Bluetooth 4.0 compatible with
Windows 7 that you can purchase in your region. For the pairing method, please
refer to the instruction manual for the Bluetooth® adapter compatible with
Bluetooth 4.0. (* We cannot take responsibility for its operation)
Hint for pairing
Select “ELECOM Relacon” from the list of devices.
macOS Mojave (10.14)
Can only be used for Macintosh compatible with Bluetooth 4.0.
-
From the Apple menu, click “System Preferences…” to display the system environment settings screen.
-
Click “Bluetooth” to display the “Bluetooth” environment settings screen.
-
During device search, holddown the pairing button on the side of the product for around 5 seconds, and then release.
The product will be in pairing mode and the battery indicator light will blink red. -
Select “ELECOM Relacon”, and click “Connect” to start pairing.
-
When it changes to “Connected”, pairing is completed.
Android
Instructions for Pixel 3 (Android 9) are as follows.
-
Open “Settings” on your device.
-
Hold down the pairing button on the side of the product for around 5 seconds, and then release.
The product will be in pairing mode and the battery indicator light will blink red. -
Tap on “Connected devices”.
-
Tap on “Pair new device”
The Bluetooth will turn ON automatically if it is OFF. -
Select “ELECOM Relacon” from “Available devices” and tap on the display. Pairing will begin automatically.
-
When pairing is complete, “ELECOM Relacon” will appear under “Connected devices”.
If pairing fails, delete “ELECOM Relacon” from “Available seich The power on this rochet our atompting the pairing again.
How to clean the trackball
- Remove the battery cover.
- Use a thin rounded stick to push the ball from behind.
- Use a cotton bud or similar to remove the dust accumulated on the three contact surfaces of the red ball.
Specifications
MouseAssistant
Win https://www.elecom.co.jp/r/132.html
Mac https://www.elecom.co.jp/r/133.html
Download “ELECOM Mouse Assistant” from the ELECOM website to use its button
assignment and high-speed scrolling functions. Windows® RT 8.1 and Andriod are
not supported by the “ELECOM Mouse Assistant”.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>