victron energy 7656 Smart Battery Sense User Manual
- June 16, 2024
- victron energy
Table of Contents
victron energy 7656 Smart Battery Sense
Smart Battery Sense Manual
Technical Product Specification
Operation and Dimensions
- Dimension (h x w x d): mm
- Cable length
- Eyelet hole size
- Fuse rating
- Operating temperature range
- Operating voltage range
- Absolute maximum voltage
Bluetooth
- Frequency
- Power
Power Consumption
| Battery Voltage | 12 V | 24 V | 48 V |
|---|---|---|---|
| Not Connected | 0.3 mA | 0.2 mA | 0.2 mA |
| Joining VE.Smart Network | 0.5 mA | 0.3 mA | 0.3 mA |
| Connected | 1.6 mA | 0.9 mA | 0.6 mA |
Product Usage Instructions
Introduction
The Smart Battery Sense is a device that allows you to monitor the voltage
and temperature of your battery. It can be used in conjunction with a
VE.Direct Bluetooth Smart dongle or as a standalone unit.
Installation
To install the Smart Battery Sense, follow these steps
- Choose a suitable location for the device.
- Connect the device to the battery using the provided cable.
- Ensure the device is securely attached to the battery.
Configuration
To configure the Smart Battery Sense, please refer to the following video
tutorial
LED Status Codes
The Smart Battery Sense has two LEDs: a Bluetooth status LED (blue) and an
Error LED (red). Here are the different LED status codes
- Blue LED
- Slow blinking : The device is ready to accept a Bluetooth connection.
- Fast blinking : Firmware update mode. Wait for the update to complete before using the device.
- Red LED
- On : Hardware error. The device will not be visible in VictronConnect and will not contribute information to the VE.Smart Network.
- Off : No error.
- Fast blinking : Firmware update in progress.
- Slow blinking : Connected and programming.
Troubleshooting
If you encounter any issues with the Smart Battery Sense, please consult
both the VictronConnect manual and the VE.Smart Network manual for
troubleshooting steps.
FAQ (Frequently Asked Questions)
-
Q: Can I use the Smart Battery Sense without a VE.Direct Bluetooth Smart dongle?
A: Yes, the Smart Battery Sense can be used as a standalone unit without the dongle. However, using it with the dongle provides additional functionality. -
Q: How do I know if the Smart Battery Sense is functioning correctly?
A: The Bluetooth LED should be slow blinking when the device is powered up and ready to accept a connection. If both LEDs remain illuminated or if there is a hardware error, the device may not be functioning correctly. -
Q: Can I update the firmware of the Smart Battery Sense?
A: Yes, firmware updates can be performed by connecting to VictronConnect. When the LEDs are alternating quickly for more than 30 seconds, it indicates that the device is in firmware update mode.
Introduction
Smart Battery Sense is a wireless battery voltage-and-temperature sensor for
Victron MPPT Solar Chargers.
The Solar Charger uses these measurements to optimize its charge parameters.
The connection between Smart Battery Sense and one or more Solar Charger(s) is
wireless: It uses VE.Smart Network – a wireless technology based on Bluetooth
Smart.
Simple to install & configure, Smart Battery Sense comes with an inline fuse
and pre-crimped eyelets. Revealing the self-adhesive tape on the back allows
you to mount it directly on the battery.
Product page on our main website: https://www.victronenergy.com/accessories
/smart-battery-sense
When can I use Smart Battery Sense …and when should I avoid using it?
- Check the VE.Smart Networking compatible products list for compatible Solar Chargers.
- Smart Battery Sense is not needed, or allowed, in systems which are already controlled by a Color Control GX or Venus GX, see FAQ Q6 for more info.
- Smart Battery Sense is not needed for installations which already have a BMV-712 (battery monitor) with a temperature sensor accessory.
- For installations using a BMV-702 together with its optional temperature sensor accessory – for wireless connectivity consider adding a VE.Direct Bluetooth Smart dongle instead of a Smart Battery Sense.
Installation
- Connect the two eyelets to your battery terminals and attach the unit directly onto the battery-body using its self-adhesive strip.
- For banks of batteries Smart Battery Sense may be connected to any one of the individual batteries.
- If the bat+ and bat- cables are not long enough they may be extended – only make sure you use the same, or a thicker, gauge of cable.
- For Bluetooth pairing of the Smart Battery Sense with your mobile device and the VictronConnect app , see the VictronConnect manual, chapter Bluetooth Smart – Pairing and connecting , which can be downloaded from the Smart Battery Sense product page.
Configuration
This video will show you how to install Smart Battery Sense and includes step- by-step instructions for connecting it your mobile phone via VictronConnect VE.Smart Networking manual. https://www.youtube.com/embed/v62wCfXaWXY
LED Status codes
- Smart Battery Sense has two LEDs: a Bluetooth status LED (blue), and an Error LED (red).
- On power-up, the Bluetooth LED will be slow-blinking – indicating that the device is ready to accept a Bluetooth connection.
- If both LEDs remain illuminated, something is wrong with the Smart Battery Sense unit (Hardware error).
- When the LEDs are alternating quickly for more than 30 seconds, the Smart Battery Sense is in firmware update mode and will need to complete the update before it can be used. Firmware updates are performed (where necessary) after connecting to VictronConnect.
Blue LED| Red LED| Smart Battery Sense state|
Connection State| Remark
---|---|---|---|---
On| On| Not functional| Disabled| Hardware error.
Smart Battery Sense will not be visible in VictronConnect andit will not be
contributing information to the VE.Smart Network.
Slow blinking| Off| Measuring V/T| Not connected| If VE.Smart Networking has
been configured, the device will be contributing the voltage and temperature
information to the VE.Smart network.
On| Off| Measuring V/T| Connected| If VE.Smart Networking has been configured,
the device will be contributing the voltage and temperature information to the
VE.Smart network.
Fast blinking| Fast blinking| Firmware update| Not connected| Red and Blue LED
Alternating
On| Slow blinking| Firmware update| Connected|
On| Fast blinking| Firmware update| Programming|
Troubleshooting
See both the VictronConnect manual and the VE.Smart Network manual.
Technical product specification
Operation and Dimensions
| Description | Value |
|---|---|
| Dimension h x w x d (mm) | 14 x 38 x 38 |
| Cable length | 45cm |
| Eyelet hole size | 10mm (M10) |
| Fuse rating | T1A 250V |
| Operating temperature range | -10°C to +60°C |
| Operating voltage range | 8V to 60V |
| Absolute maximum voltage | 65V |
| Bluetooth Frequency | 2402-2480MHz |
| Bluetooth Power | -4dBm |
Power consumption
BatteryVoltage| Not Connected| Joining VE.Smart Network|
Connected
---|---|---|---
12 V| 0.3 mA| 0.5 mA| 1.6 mA
24 V| 0.2 mA| 0.3 mA| 0.9 mA
48 V| 0.2 mA| 0.3 mA| 0.6 mA
References
- victronconnect:start [Victron Energy]
- victronconnect:ve-smart-networking [Victron Energy]
- victronconnect:ve-smart-networking [Victron Energy]
- Smart Battery Sense Manual
- 3. Connecting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>