Greenvelly H02BN513 White File Cabinet 2 Drawer Lateral Filing Cabinet with Lock Instruction Manual
- June 16, 2024
- Greenvelly
Table of Contents
Greenville H02BN513 White File Cabinet 2 Drawer Lateral Filing Cabinet
with Lock
Product Information
Product Model: H02BN513/H02WN514
Package Contents:
- 1 Left back plate
- 1 Right back plate
- 1 Left Panel
- 1 Right Panel
- 1 Front leg
- 1 Back leg
- 1 Top Panel
- 2 Drawer Front Panel
- 2 Front plug
- 2 Rear plug
- 2 Drawer Chest
- 4 Short hanging rod
- 2 Long hanging rod
Specifications
- M5x12mm screws: x7
- M4x16mm screws: x4
- M4x8mm screws: x8
- M8 screws: x2
- M5*30 screws: x1
Installation Steps:
-
Step 1: As shown in the diagram, raise the rivet of 3 to drive the lock rod and connect the spring axis of 7. Repeat this step on the right side.
Step 2: Insert the key and turn it clockwise 180 degrees to open the lock. -
Step 3: Install two interlock fasteners on each side using M4x16mm screws.
-
Step 4: Install Dx8 using M4x8mm screws.
-
Step 5: Install Ax2 using M5x12mm screws.
-
Step 6: Install Ax7 using M5x12mm screws.
-
Step 7: Repeat Step 1 and Step 2.
-
Step 8: Install Ax4 using M5x12mm screws.
-
Step 9: Install Dx2 and Fx2 using M4x8mm screws.
-
Step 10: Install Dx2 and Gx2 using M4x8mm screws.
-
Step 11 : Install Hx2 using M8 screws, M5*30 screws, and M5 screws. Note: This step is optional and can be ignored if not needed.
-
Step 12 : Slide the steel ball to the front of the cabinet’s outer slide. Insert the inside railway course on both sides of the drawer on the outside railway course of the cabinet at the same time. Two people must put the drawer flat and insert it slowly and synchronously. After inserting it to the end, pull it out slowly twice to ensure the slide track works normally. If it fails, follow the slide track removal instructions, open it, and reinstall it.
-
Step 13: Repeat Step 12 to complete the installation.
Frequently Asked Questions (FAQ)
Q: What is included in the package?
A : The package includes 1 left back plate, 1 right back plate, 1 left
panel, 1 right panel, 1 front leg, 1 back leg, 1 top panel, 2 drawer front
panels, 2 front plugs, 2 rear plugs, 2 drawer chests, 4 short hanging rods,
and 2 long hanging rods.
Q: How do I open the lock?
A : Insert the key provided and turn it clockwise 180 degrees to open
the lock.
Q: What should I do if the slide track doesn’t work properly?
A : Follow the slide track removal instructions, open it, and reinstall
it according to the installation steps.