ELEGOO SATURN 2 3D Drucker Instruction Manual
- June 16, 2024
- ELEGOO
Table of Contents
ELEGOO SATURN 2 3D Drucker
Product Information
Welcome
Thank you for choosing the ELEGOO SATURN 2 3D Printer. Please unpack the
device and check it carefully. If you have any questions about the printer,
contact us at 3dp@elegoo.com, on Facebook, or
Instagram. You can find manuals in other languages and software for download
at www.elegoo.com/download.
Important Notice
- Before the first use, the printer must be leveled. See the leveling instructions.
- Please use ethyl alcohol or isopropanol with a concentration of at least 95% to clean your models unless you are using water-washable resin.
- Use the printer indoors and avoid direct sunlight and dusty environments.
- Keep the printer away from water and damp environments.
- Wear a mask and gloves to avoid direct skin contact with the resin.
- In case of an emergency, turn off the printer immediately and contact ELEGOO customer service at 3dp@elegoo.com.
Specifications
System Parameters
Control Interface| 3.5-inch Touchscreen
Slicer Software| Chitubox & LycheeSlicer
Connectivity| USB
Printing Specification
Technology| MSLA Photocuring
Light Source| COB (Wavelength: 405 nm)
XY Resolution| 0.0285 mm (7680 x 4320)
Z-axis Precision| 0.00125 mm
Layer Height| 0.01 mm – 0.2 mm
Print Speed| 30-70 mm/h
Power Requirements| 100 V-240 V, 50/60 Hz, 24 V, 4 A
Hardware Specification
Dimensions (LxWxH)| 305.9 mm x 273 mm x 567.3 mm; 12.05 in x 10.75 in x 22.33
in
Print Volume (LxWxH)| 218.88 mm x 123.12 mm x 250 mm; 8.62 in x 4.85 in x 9.84
in
Weight| 11 kg (24.25 lbs)
Printer Components
-
Knob
Used to adjust the print platform. -
Air Filter
Helps maintain a clean printing environment. -
10.1-inch LCD Screen
Displays the print status and settings. -
Power Switch
Turns the printer on and off. -
Z-axis
The vertical axis of the printer. -
Print Platform
Where the 3D objects are formed. -
Resin Vat
Holds the resin during printing. -
3.5-inch Touchscreen
For navigating the printer’s menus and features. -
Screws
Used for assembly and adjustments.
Package Contents
- Air Filter
- USB Stick
- Mask
- Gloves
- Scraper
- Filter
- Spare Screws
- User Manual
- Adapter
- Tool Kit
Leveling
Leveling is an essential process to ensure the printer bed is at the
correct distance from the LCD screen for optimal printing. Follow the step-by-
step instructions, referring to the associated images for visual guidance.
FAQ
1. The model does not adhere to the print platform.Adjust the bottom layer exposure time. If the model has too little contact area with the print platform, increase the number of bottom layers.2. Layer separation on the model.Ensure that the printer is level and stable during printing. If the FEP film is loose, it must be replaced. Make sure the resin vat and print platform are properly secured.3. Unusual screen lighting.If your 3D printer is not functioning, please contact us at 3dp@elegoo.com. Include your order number in the email for faster assistance.4. Print failure.Ensure that if the model is not printed completely, no residues are left in the resin. Filter out the resin before pouring it back into the bottle. Residues can be removed with paper towels from the print platform or resin vat.
Warranty
ELEGOO offers a 1-year warranty on products damaged through non-human factors, excluding filaments, LCD screens, and FEP films. The LCD screen has a 6-month warranty against non-externally inflicted damage. No warranty claims are accepted for modified or disassembled products.
Support
References
- ELEGOO: Best Consumer Level 3D Printers, Materials and STEM Products – ELEGOO Official
- ELEGOO 3D Printers, Arduino Kits & Robots Tutorials Download – ELEGOO Official
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>