tuya DY82606 Smart Scene Music Lamps Instructions
- June 16, 2024
- Tuya
Table of Contents
DY82606 Smart Scene Music
Lamps Instructions
DY82606 Smart Scene Music Lamps
Smart
Scene Music Lamps
Instruction
Instruction
Basic parameters :
Controlling method : APP/IR Type/key board type
Working temperature : -20degrees to + 60degrees
Power : 1.5W/Pice Power supply voltage : DC5V
(Each DC5V 2A power supply can load 15pcs modules, if need more modules.
Applied places: study room, living room, bedroom, night club or bar, KTV, gym,
music bar or restaurant, coffee shop and other home and commercial places.
Product Characteristics
Support mobile APP control, support IOS and Android system
Stay tuned for more smart interactive features!
Installation instructions
- Please make a model layout plan in advance or pre-manufacture the model on the desktop, and define the position of the drive control line entrance.
- Remove the release paper on one side of the double-sided non-marking adhesive, stick the double-sided adhesive to the center of the back of the module, and remove the release paper on the other side of the non-marking adhesive before installation. (This step is omitted for desktop installation)
- First locate the drive control line entrance module, then insert the arrow pointing end of the connecting piece (NEXT end) into the cascade module, and insert the “PRE” end of the connecting piece into the previous module according to the sequence of the modeling plan to complete the installation.
- Insert the USB end of the drive control line into the first module, and then plug the other end of the drive control line into any signal output port corresponding to the pickup, and power the power adapter ta complete the installation.
Safety Precautions
- Before use, please confirm whether the voltage conformed to the working voltage of this product. Improper use of voltage may damage the product and bring safety hazards.
- Do not disassemble the scene music lamp module by yourself.
- The product will generated heat during operation, please keep the surrounding air convection to allow good heat dissipation.
- Do not use non-standard power adapters to avoid product damage or causing safety hazards.
Packing spare parts
Scene Music Lamps
Sound controlling system
IR remote control
USB cable
Double sided sticker
Connector
DIY any assembly style
Please read carefully before using the product >>
I Product Features
- Support WiFi 2.4GHz 802.11 b/g/n wireless network.
- Support remote/ local control through 2G / 3G /4G / Wi-Fi networks.
- The main account can be shared with other accounts subaccounts). (only 6 mobile phones)
II Working temperature:-10℃-45℃(140°F-113°F)
Humidity:≤80%RH
Working environment: Indoor
III How to connect with the App?
- Turn on both Bluetooth and WiFi on your cell phone. And download the app “Tuya”.
- Click “Add device” in the app to enter the search status.
- Turn on the lightbar. Press and hold the power button on the control-box for about 5 seconds. Then the lightbar will appear in your app.
- Click “Add” in the App.
- Enter your home misinformation to complete the connection
|
---|---
https://smartapp.tuya.com/tuyasmart
|
IV Notes on the remote control:
- It must be facing the IR-Receiver.
- Make sure that there are no obstacles in the middle.
V ways to Operation
(1) Manual Control by 3 Buttons
VI
Connect your Echo to your Smart life System
VII Control Smart life devices with
Alexa Voice control phrase:
Explanation:
Firstly, you should say “Alexa” to wake Alexa if it wakes. you will see the
blue LED light lighten up around Alexa. You may use “turn on“ to open some
device.Use “turn off“ to close some device.
And at last, you should say the name of the device you want to control.
Try out these phrases ({Device Name} should be the
name of your device):
Take lightbulb as an example by the name of “light” {Device Name}
⑴ ON: “Alexa. turn on light{Device Name}” .when
you hear response “OK” means control successfully
⑵ OFF: “Alexa, turn of flight{Device Name}”
⑶ Dimming:
①”Alexa, set light{Device Name}to 80 percent”
②”Alexa,dim light{Device Name to 50 percent”
③”Alexa,dim light{Device Name by 100 percent”
⑷Color changing:
“Alexa, set light {Device Name}to blue”
WARNING
Please read this manual carefully before using the
Product, and keep if for records properly.
Made in China
Documents / Resources
| tuya
DY82606 Smart Scene Music
Lamps
[pdf] Instructions
DY82606 Smart Scene Music Lamps, DY82606, Smart Scene Music Lamps, Scene Music
Lamps, Music Lamps, Lamps
---|---