LEZYNE 74356-Y17-LED-SUPERDRIVE LED Lights User Guide

June 16, 2024
Lezyne

QUICK START
SUPER DRIVE 1800+ / SUPER DRIVE 1800 + LOADED 

Packaging include

| Mounting Strap| KTVPro SmartRear| GoPro Adapter| Handle BarMount
---|---|---|---|---
SUPER DRIVE 1800°| | | |
SUPER DRIVE 100″ LOADED| | | | (CM)

KTV Drive Pro Smart Rear Instruction (Super loaded ONLY)
BATTERYLEZYNE 74356 Y17 LED-SUPERDRIVE LED Lights -
Battery

CHARGINGLEZYNE 74356 Y17 LED-SUPERDRIVE LED Lights -
charger

RUN TIMES AND MODE

| DAY FLASH| FLASH| FLASH| FLASH| FLASH| FLASH
---|---|---|---|---|---|---
| 75
LUMENS| 25
LUMENS| 10
LUMENS| 25
LUMENS| 20
LUMENS| 3
LUMENS
| 10:00
h: min| 8:45
h: min| 19:30
h: min| 8:45
h: min| 4:00
h: min| 18:00
h: min

MOUNTINGLEZYNE 74356 Y17 LED-SUPERDRIVE LED Lights -
Mounting

Handlebar Mount Instruction

(Super loaded ONLY)LEZYNE 74356 Y17 LED-SUPERDRIVE LED Lights -
Instruction

Battery Indicator

An LED, located in the button, displays current battery status while light is ON. When light is OFF, click button once to momentarily display battery status. LEZYNE 74356 Y17 LED-SUPERDRIVE LED Lights -
Indicator

Charging

Before using your Lezyne LED Light for the first time, fully charge the battery.
To charge your light:

  1. Switchlight OFF

  2. Remove USB-C protective cover

  3. Connect USB-C cable and light to powered USB-C port

  4. Once charging, button will flash green; if USB-C port is capable, light will use High Efficiency (HE) charging and button will flash blue
    If button does not flash when plugged in, selected USB-C port may not be powered—try another USB-C port.
    Light will be charged after 6-8 hours (4-6 with HE charging) or when button illuminates solid green or blue.

  5. Remove light from charger and reinstall USB-C protective cover—ensure USB-C protective cover is fully installed for water resistance

LEZYNE 74356 Y17 LED-SUPERDRIVE LED Lights - chargeing
1

Scan to see features and videos

LEZYNE 74356 Y17 LED-SUPERDRIVE LED Lights - QR CODEhttps://ride.lezyne.com/pages/smart-connect-led-app

LEZYNE 74356 Y17 LED-SUPERDRIVE LED Lights - QR CODE
2Download
Lezyne LED Ally
to pair lights & customize modes
READ ENTIRE MANUAL BEFORE OPERATION to ensure proper use and care of your new Lezyne LED light. Traffic laws mandating lighting vary from country to country. Inform yourself about lighting laws and regulations in the country of use. Lezyne LED lights do not conform to the German road traffic regulation Stvz0. LEZYNE 74356 Y17 LED-SUPERDRIVE LED Lights - Fig
1

Warnings
DO NOT LOOK DIRECTLY INTO LIGHT BEAM or shine into eyes of another.
Lezyne LED Lights have a water resistance rating of IPX7 under EC standard 60529. Submerging the device is not recommended. If moisture does enter the casing, air out until completely dry.
DO NOT ATTEMPT TO REMOVE ELECTRONICS. Doing so will void warranty.
Lezyne USA, Inc. does not accept any liability for injuries or other damages resulting from the use of this product in any circumstances.

Warranty

InU.S. and U.K., Lezyne LED Lights carry a two (2) year warranty from the original purchase date to the original owner (proof of purchase required). Lezyne Batteries carry a six (6) month warranty from the original purchase date. Lezyne warranties cover any manufacturing defects in materials or workmanship. Issues not covered by warranty include normal wear & tear, improper installation, attempting to access or modify electronics, damage or failure due to accident, misuse, abuse and/or neglect.
For all warranty issues worldwide, please contact the retailer that sold the product.
For any warranty questions contact: warranty@lezyne.com

Mounting

LEZYNE 74356 Y17 LED-SUPERDRIVE LED Lights - Mounting
2

Operation

  1. On/Off: hold button two (2) seconds
  2. Mode cycle: click button

RACE MODE: With the light OFF, hold button for five (5) seconds, until light flashes.
The light is now in Race Mode where only Overdrive and Enduro outputs are selectable. The light will remain in Overdrive Race Mode even when switched OFF. Repeat the step above to return to the normal mode set
MODE MEMORY: The light remains in the output setting it is switched OFF in.
THERMAL PROTECTION: If the operating temperature of the light is too high, the light automatically lowers the lumen output Run Times and Modes
Al light modes are available when using the Infinite Light Power Pack+ and XL+. However, when the light’s internal battery is low, certain light modes will be limited for battery safety reasons.

SUPER DRIVE 1800+

| ECONOMY| ENDURO| BLAST| OVER DRIVE| DAY FLASH| FEMTO| PULSE
---|---|---|---|---|---|---|---
| 350
LUMENS| 500
LUMENS| 1100
LUMENS| 1800
LUMENS| 750
LUMENS| 20
LUMENS| 200
LUMENS
| 9:00
h : min| 6:00
h : min| 2:45
h : min| 1:45
h : min| 21:00
h : min| 180:00
h : min| 45:00
h : min
Power Pack+ Normal
USB mode| | | | | | |
Power Pack+
Low battery
USB mode| | | | | | |

RACE MODE

OVERDRIVE MODE: A great use for this is when alternating between steep climbs and descents. While climbing, you’ll be traveling ata much slower speed, so it’s a great time to conserve battery with the lower setting. When you reach the top and start to descend at a higher speed, you can hit the button once, and switch to the highest output of the light without having to search through all the flashing modes.
DAY FLASH MODE: Speccifically flashing is the single most effective way to make yourself more visible.

  • Please read all instructions before use

Lezyne USA, 645 Tank Farm Rd., Unit F, San Luis Obispo, California 93401
For more info go to: www.lezyne.com/support.php
74356-Y17-LED-SUPERDRIVE-SUPERDRIVELOADED-PLUS-QUICK-ROB1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals