MANUAL
FS5100 POWER BANK 10.000

SPECIFICATIONS

| 10.000 mAh Li-Polymer / 37Wh
---|---
| 1x USB-C PD 20W
1x USB-C 18W
1x USB-A 22.5W (QC 3.0 18W / SCP 22.5W)
| USB-C PD 18W input
| 136x71x15 mm
| 218 grams
| 1x USB-C PD cable
1x Manual

When using multiple outputs
When using 2 outputs
1/2 Share 15W
2/3 Share 15W
1/3 Share 15W
When using all outputs
1/2/3 Share 15

WPRODUCT OVERVIEW

1. Output
   USB-C PD 18W

2. Output
   USB-A 22.5W
   QC 3.0 18W / SCP 22.5W

3. Output
   USB-C 20W

4. Input
   USB-C PD 18W

5. Power Button

6. Digital Power Indicator

7. Official Xtorm Label

CHARGING YOUR DEVICE

3A Connect the USB-C end of the charging cable to the USB-C PD output of the Power Bank and the other end to the input of your device. The charging will start automatically.
3B Charging some devices requires a charging cable other than the one supplied. E.g. an Apple Lightning® or a Micro USB cable.

RECHARGING THE POWER BANK

4A Connect the USB-C end of the charging cable to output 3 of the Power Bank and the USB end to a wall charger.
4B For the fastest charging possible use a 18W USB-C PD charger. This will fully recharge the Power Bank within 3.4 hours.

LED POWER INDICATOR

5A Press the Power Button once to display the battery level remaining in the Power
Bank via the LED display. Improved Power Button function:
– single press to turn on/off the diplay
– double press to fully turn on/off the Power Bank
5B The display shows the remaining battery percentage between 0% (empty) and 100% (fully charged).
5C The fast charge indicator will light up when you are using the correct cable for fast charging your device. (20W USB-C PD and higher).

1. SPECIFICATIONS

2. PRODUCT OVERVIEW

3. CHARGING YOUR DEVICE
   3.A Connect the USB end of the charging cable to the USB-A output of the Power Bank and the other end to the input of your device. The charging will start automatically.
   3.B Charging some devices requires a charging cable other than the one supplied. E.g. an Apple Lightning® or a Micro USB cable.

4. RECHARGING THE POWER BANK
   4.A Connect the USB-C end of the charging cable to output 3 of the Power Bank and the USB end to a wall charger.
   4.B For the fastest charging possible use a 18W USB-C PD charger. This will fully recharge the Power Bank within 3.4 hours.

5. LED POWER INDICATOR
   5A Press the Power Button once to display the battery level remaining in the Power Bank via the LED display. Improved Power Button function:
   – single press to turn on/off the diplay
   – double press to fully turn on/off the Power Bank
   5B The display shows the remaining battery percentage between 0% (empty) and 100% (fully charged).
   5C The fast charge indicator will light up when you are using the correct cable for fast charging your device. (20W USB-C PD and higher).

6. IN THE BOX

When recycling this product, please follow WEEE battery recycling procedures. Contact your local recycling organization for more information.
XTORM SAFETY CHECK

| 1. TEMPERATURE CONTROL
Provided with a temperature control chip that prevents overheating.
---|---
| 2. OVERLOAD PROTECTION
Protects both the internal battery as well as the battery of the attached device from overcharging.
| 3. SECURED POWER MANAGEMENT
Automatically picks the correct charging speed and efficiently devides power between attached devices.
| 4. SHORT CIRCUIT PROTECTION
Breaks the circuit automatically when an overcurrent is detected. This protects the Xtorm chargerand your device from short circuit damage.
| 5. A-CLASS BATTERY CELLS
We only use the best battery cells that provide the fast charging you need and meet all safety requirements.
| 6. HIGH EFFICIENCY
Our power products are built to power your device as efficient as possible. This en- sures the least possible loss of energy during the charging process.

WARNINGS
Warnings
Don’t drop, dissemble or attempt to repair the charger by yourself. Avoid exposure to water or high humidity. Don’t expose to any heat source. Keep out of reach of children. Don’t use in the presence of flammable gas. The warranty will lapse in the event of improper use. Telco Accessories has tested the product in a test environment. All statements/declarations made by Telco Accessories about the (operation) of the product are based on the results obtained from such tests. These results/statements/declarations cannot be guaranteed, for example in cases of deviating or injudicious use and/or use in a different environment.
EU DECLARATION OF CONFORMITY
(In accordance with EN ISO/IEC 170S0-1)

19 3992 DH Houten Netherlands

THIS DECLARATION OF CONFORMITY IS ISSUED UNDER THE SOLE RESPONSIBILITY OF:

Name and address of manufacturer:| Telco Accessories Group Hoofdveste 19 3992 DH Houten Netherlands
---|---
Product identification:| FS510x 20W Fuel Series Powerbank 10.000
FS520x 35 W Fuel Series Powerbank 20.000
FS527x 6 7W Fuel Series Powerbank 27.000
FS545x 6 7W Fuel Series Powerbank 45.000

THE PRODUCTS MENTIONED IN THIS DECLARATION ARE IN CONFORMITY WITH:

EU Community Legislation| Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU [OJEU L174/88-110, 01.07.2011] Electromagnetic Compatibility (EMC) Directive 2014/30/EU [OJEU L96/79-106, 29.03.2014]
---|---
Harmonised standards| Electromagnetic Compatibility (EMC)
EN 55032:2015 + AC:2016 + A11:2020 + A1:2020
EN 55035:2017 + AC:2019-11 + A11:2020
Restricted substances in electrical products
EN IEC 63000:2018

SIGNED FOR AND ON BEHALF OF:

HIGHER QUALITY
= LOWER IMPACT
CUSTOMER SUPPORT
support@tag.nl
+31 (0)30 635 4800
TELCO ACCESSORIES GROUP
Hoofdveste 19, 3992DH Houten
The Netherlands

MOREENERGY

XTORM.EU

References

• Xtorm | | Power Banks | Solar Chargers | Power Stations – Xtorm EU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>