XUNZEL XU2220419-IAPU Pack Solar Life User Manual
- June 16, 2024
- XUNZEL
Table of Contents
XUNZEL XU2220419-IAPU Pack Solar Life
Product Information
Specifications
- Solarpower Photovoltaic Solar Panels
- iSCC Charge Controller
- SolarX/SolarX-Lithium Battery Bank
- XJ Inverter
- Conformity: LVD Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU, WEEE 2012/19/EC Reg. 4790-RII-AEE, 2004/12/EC Ref. 20457
| Component | Description |
|---|---|
| SOLARPOWER™ Panels | Photovoltaic solar panels for energy capture. |
| iSCC™ Controller | Charge controller for the solar system. |
| SOLARX™ Battery Bank | Battery storage for the solar system. |
| XJ™ Inverter | Device to convert DC to AC power. |
Visual Description of the System
The manual provides a visual description of the solar energy system, which includes:
- SOLARPOWER™ Photovoltaic Solar Panels
- iSCC™ Charge Controller
- SOLARX™ / SOLARX-LITHIUM™ Battery Bank
- XJ™ Inverter
- Alternating Current (AC) Loads (not included)
- LED NATURE™/GALAXXITM and Direct Current (DC) Loads (not included)
Important Safety Information
Key warnings and cautions include the risk of electric shock, the
importance of not touching AC and DC terminals, not using damaged equipment,
covering solar panels during handling, installation requirements, and more.
Detailed instructions emphasize the importance of careful handling to avoid
short-circuits, sparks, and ensuring solid and tight connections. A diagram
illustrates the connection between these components, with solar panels
connected to the charge controller, which is connected to the battery bank and
the inverter. The inverter is then connected to AC loads, and DC loads are
illustrated as well.
SolarPower Photovoltaic Solar Panels
The SolarPower photovoltaic solar panels are designed to convert solar energy into electrical energy. These panels are an essential component of the Pack Zero+ L Series system.
iSCC Charge Controller
The iSCC charge controller regulates the charging process of the solar
panels. It ensures that the battery bank is charged efficiently and prevents
overcharging.
SolarX/SolarX-Lithium Battery Bank
The SolarX/SolarX-Lithium battery bank stores the electrical energy
generated by the solar panels. It provides a reliable power source for your AC
and DC loads.
XJ Inverter
The XJ inverter converts DC power from the battery bank into AC power, allowing you to use your AC loads. It provides a stable and clean power output.
Product Usage Instructions
Installation
Before installing the Pack Zero+ L Series system, make sure to read and
understand all safety instructions provided in the user manual.
- Find a suitable location for the solar panels. Ensure they receive maximum sunlight exposure throughout the day.
- Mount the solar panels securely using the provided mounting brackets and hardware.
- Connect the solar panels to the iSCC charge controller using the appropriate cables and connectors.
- Install the SolarX/SolarX-Lithium battery bank in a well-ventilated area, away from direct sunlight and extreme temperatures.
- Connect the battery bank to the iSCC charge controller using the provided cables and connectors.
- Install the XJ inverter near your AC loads, ensuring proper ventilation and sufficient space for heat dissipation.
- Connect your AC loads to the XJ inverter using standard AC power cables.
Operation
- Ensure that all connections are firm and tight before starting the system.
- Check the LED indicators on the iSCC charge controller and XJ inverter to verify proper operation.
- To power AC loads, turn on the XJ inverter and connect your devices to the AC outlets.
- To power DC loads, connect your devices directly to the SolarX/SolarX-Lithium battery bank or use compatible DC adapters.
Maintenance
- Regularly inspect the solar panels for any damage or dirt accumulation. Clean them with a soft cloth and mild detergent if necessary.
- Check the battery bank’s charge level regularly and recharge it using the solar panels if needed.
- Keep the iSCC charge controller and XJ inverter clean and free from dust. Use a soft brush or compressed air to remove any debris.
- In case of any issues or malfunctions, refer to the troubleshooting section of the user manual or contact customer support.
Warranty
The warranty section outlines the responsibilities of XUNZEL, highlighting that under no circumstances will XUNZEL assume responsibility for damages due to force majeure, faulty assembly, unauthorized alterations, misuse, polarity errors, use of incorrect battery bank capacity or voltage, or incorrect cable sizing.
XUNZEL ENERGY S.L.
- Legal address: Igartualdea, 57, ES-20850 Mendaro (Spain)
- Email: info@xunzel.com
- Website: www.xunzel.com
- Serial Number: [space for input]
- Conformity: Complies with LVD Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU, WEEE 2012/19/EC, and 2004/12/EC.
FAQ
How many solar panels are included in the Pack Zero+ L Series?
The number of solar panels included in the Pack Zero+ L Series depends on the specific model you have purchased. Please refer to the product packaging or user manual for this information
Can I connect additional solar panels to the system?
Yes, you can connect additional solar panels to the Pack Zero+ L Series system. However, ensure that the total power output of the additional panels does not exceed the maximum capacity supported by the iSCC charge controller.
Can I use the system during cloudy days?
Yes, the Pack Zero+ L Series system can still generate electricity during cloudy days, although at a reduced output. However, it is recommended to have sufficient sunlight for optimal performance.
How long does it take to fully charge the battery bank?
The charging time of the battery bank depends on various factors such as the available sunlight intensity, the capacity of the solar panels, and the state of charge of the battery bank. It is recommended to refer to the user manual for estimated charging times.
Can I use the XJ inverter with other battery banks?
The XJ inverter is designed to work specifically with the SolarX/SolarX- Lithium battery bank included in the Pack Zero+ L Series. It may not be compatible with other battery banks. Please consult the user manual or contact customer support for further information.
What components are included in the PACK SOLARLIFE+™ Series?
The system includes photovoltaic solar panels, a charge controller, a battery bank, an inverter, and connections for AC and DC loads.
What should be done in case of an electric shock hazard?
Do not touch AC and DC terminals under any circumstances and cover the solar panels when handling them.
What are the safety precautions during installation?
Ensure all local requirements are met, install with the help of an electrician or qualified personnel, use insulated tools, and follow safety protocols.