xunzel XJC Series Advanced Pure Sinewave Inverter Owner’s Manual

: June 12, 2024
: XUNZEL

Table of Contents

Available Models
Technical Specifications
Technical Drawings
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

XUNZEL Logo

XUNZEL Advanced Pure Sinewave Inverter Instructions
XJC-1000W-40A-12V
XJC-2000W-55A-12V

Inverter with Battery Charger and Transfer-Switch.
Integrated mains priority circuit with voltage synchronization

Digital display and USB 2.1A output

Overview
Detachable Display (cable included)

Heavy duty DC terminal. More Safety

State of the art, easy to use design, these combi inverters with charger will offer you reliable service for providing AC power and 5V USB power from battery.

True sine wave output. Ideal for operating motor loads, fine electronics and reduce stress on surge protections circuitry, meaning potentially longer equipment life.

```
* Pure sine wave (True Sine Wave) AC output, with very low Total Harmonic Distortion (THD). Ensure the correct functioning of sensitive devices.
```
- Converts battery power to AC power anywhere with high efficiency.
- With Battery Charger and Automatic Transfer Switch integrated
- Very low self-consumption. Power Save Mode. Get the maximum energy of your batteries. Designed for “always-on”. High efficiency cooling design.
- Silent Operation. Lightweight and robust. Anodized Aluminium case.
- High surge capacity (2 x constant).
- With digital display and/or LED monitoring for easy and quick status reading and programming.
- Low battery alarm and shutdown protection to prevent the battery from too deep discharges. Extend the life of your batteries.
- Automatic shutdown protections integrated: overtemperature, short-circuit, overload and low/high battery conditions.
- Easy to install and use. Mounting brackets for permanent installation.
- Safe and reliable.
- USB 5V-2100mA “always-ON” output to feed and charge electronic devices.
- Isolation between DC input and AC output for safety.
- Heavy duty DC input terminals for direct, simple and secure battery connection.
- Preferred choice for powering off-grid, off-shore, onboard and back-up electronics, sensitive loads and demanding motor loads, including digital clocks, dimmers, variable speed motors, battery chargers, and telecom/audio/visual equipment.
- International output sockets available (available per country) on demand.
- E-mark approved
- - Battery Cable Connection Kits and In-Line Fuse & Holder
  - Remote Control ON/OFF with 6-meter cable (code: RCXJ)
  - ull range of optional accessories available:
  - Automatic-Start-XJ (code: ASXJ)

Available Models

```
*  **XJC-1000W-40A-12V**  
```
Inverter: 1000W / 12VDC / 1x 230VAC 50Hz + 1x Hardwire + 1x USB 5VDC 2.1A
Battery Charger: 40A / 12VDC / Programable with Transfer-Switch integrated
- XJC-2000W-55A-12V
  Inverter: 1000W / 12VDC / 1x 230VAC 50Hz + 1x Hardwire + 1x USB 5VDC 2.1A
  Battery Charger: 55A / 12VDC / Programable with Transfer-Switch integrated

Technical Specifications

Code Part Number	XJC10001240U	XJC20001255U
INVERTER
AC Output PowerNominal / Peak	1000/2000W	2000/4000W
AC Output Current	4.35AAC	8.70AAC
AC Output Voltage / Frequency	230VAC / 50Hz
AC Output Waveform	Pure Sinewave (THD<3%)
Peak Efficiency	>92%
Nominal DC Input Voltage	12.50VDC
DC Input Operation Range	10.5 – 15.5VDC
Power Saving Mode	Yes
No Load Current with PowerSave Mode OFF/ON	<1.50/0.17ADC
Under Voltage Shutdown	10.50VDC (Programable to 11.80VDC for Start Battery