XUNZEL Advanced Pure Sinewave Inverter Instructions
- June 12, 2024
- XUNZEL
Table of Contents
XUNZEL Advanced Pure Sinewave Inverter Instructions
Inverter with Battery Charger and Transfer-Switch.
Integrated mains priority circuit with voltage synchronization
Digital display and USB 2.1A output
Detachable Display (cable included)
Heavy duty DC terminal. More Safety
State of the art, easy to use design, these combi inverters with charger will
offer you reliable service for providing AC power and 5V USB power from
battery.
True sine wave output. Ideal for operating motor loads, fine electronics and
reduce stress on surge protections circuitry, meaning potentially longer
equipment life.
Product features
- Pure sine wave (True Sine Wave) AC output, with very low Total Harmonic Distortion (THD). Ensure the correct functioning of sensitive devices.
- Converts battery power to AC power anywhere with high efficiency.
- With Battery Charger and Automatic Transfer Switch integrated
- Very low self-consumption. Power Save Mode. Get the maximum energy of your batteries. Designed for “always-on”. High efficiency cooling design.
- Silent Operation. Lightweight and robust. Anodized Aluminium case.
- High surge capacity (2 x constant).
- With digital display and/or LED monitoring for easy and quick status reading and programming.
- Low battery alarm and shutdown protection to prevent the battery from too deep discharges. Extend the life of your batteries.
- Automatic shutdown protections integrated: overtemperature, short-circuit, overload and low/high battery conditions.
- Easy to install and use. Mounting brackets for permanent installation.
- Safe and reliable.
- USB 5V-2100mA “always-ON” output to feed and charge electronic devices.
- Isolation between DC input and AC output for safety.
- Heavy duty DC input terminals for direct, simple and secure battery connection.
- Preferred choice for powering off-grid, off-shore, onboard and back-up electronics, sensitive loads and demanding motor loads, including digital clocks, dimmers, variable speed motors, battery chargers, and telecom/audio/visual equipment.
- International output sockets available (available per country) on demand.
- E-mark approved
- Full range of optional accessories available:
- Battery Cable Connection Kits and In-Line Fuse & Holder
- Remote Control ON/OFF with 6-meter cable (code: RCXJ)
- Automatic-Start-XJ (code: ASXJ)
- Smart-Start™-XJ: 3-positions ON/OFF/Remote (code: SM2XJ)
- XJC-OnBoard™ Systems (code: XJC-OnBoard)
Available Models
-
XJC-1000W-40A-12V
Inverter: 1000W / 12VDC / 1x 230VAC 50Hz + 1x Hardwire + 1x USB 5VDC 2.1A
Battery Charger: 40A / 12VDC / Programable with Transfer-Switch integrated -
XJC-2000W-55A-12V
Inverter: 1000W / 12VDC / 1x 230VAC 50Hz + 1x Hardwire + 1x USB 5VDC 2.1A
Battery Charger: 55A / 12VDC / Programable with Transfer-Switch integrated
Technical Specifications
| Code Part Number | XJC10001240U | XJC20001255U | |
|---|---|---|---|
| INVERTER | |||
| AC Output PowerNominal / Peak | 1000/2000W | 2000/4000W | |
| AC Output Current | 4.35AAC | 8.70AAC | |
| AC Output Voltage / Frequency | 230VAC / 50Hz | ||
| AC Output Waveform | Pure Sinewave (THD<3%) | ||
| Peak Efficiency | >92% | ||
| Nominal DC Input Voltage | 12.50VDC | ||
| DC Input Operation Range | 10.5 – 15.5VDC | ||
| Power Saving Mode | Yes | ||
| No Load Current with PowerSave Mode OFF/ON | <1.50/0.17ADC | ||
| Under Voltage Shutdown | 10.50VDC (Programable to 11.80VDC for Start Battery |
Car)
Under Voltage Recovery| 12.00VDC (Programable to 12.60VDC for Start Battery
Car)
Over Voltage Shutdown| 15.50VDC
AC Output Ports| 1x EU schuko socket + 1x Hardwire
Power Save Mode OFF/ON LoadSense Threshold| ≤3W / ≥10W
USB port| 5VDC – 2100mADC
AC Transfer Switch| Transfer Time < 30ms | Transfer Relay Rating 16A
AC Input Sourcing Setting| 8, 10, 16A
Charger Current (max)| 40ADC| | 55ADC
Battery Type| AGM, GEL, Flooded and Fixed
Battery Minimum Capacity| > 240Ah – 12V| | > 480Ah – 12V
Display| LCD display + LED indicators
SAFETY AND ENVIRONMENTAL| | |
Standards| CE | UKCA | RoHs3 and REACH Compliant | WEEE Compliant | EMC,
LVD | E-Mark
Operating Temperature| 0°C -> +40°C (+32°F -> +104°F)
Storage Temperature| -20°C -> +60°C (-4°F -> +140°F)
Relative Humidity| 5-90%
Operating Altitude| <3000m
WEIGHT AND DIMENSIONS| | |
Weight| 5.70kg| | 6.60kg
Dimensions| 478x230x114mm
Technical Drawings
XJC-1000W-40A-12V and XJC-2000W-55A-12V
Front View
Back View
Top View
Side View
| Model | XJC-1000W-40A-12V | XJC-2000W-55A-12V |
|---|---|---|
| Code Part Number | XJC10001240U | XJC20001255U |
© Copyright 2022 XUNZEL™ reserves the right to make changes and improvements without prior notice. Specifications are subject to change without further notification. NOT IN SCALE
Symbols
© Copyright Xunzel. Information contained in this document is subject to change withoutnotice. www.xunzel.com
info@xunzel.com
www.xunzel.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>