NOKIA TA-1584 Unlocked Android Smartphone User Guide
- June 16, 2024
- Nokia
Table of Contents
TA-1584
Get Started
Nokia xx
1. Microphone
2. Loudspeaker
3. Flash
4. Camera
5. SIM and memory card slot
6. Front camera| 7. Microphone
8. Headset connector
9. Earpiece
10. Volume keys
11. Power/Lock key
12. USB connector
---|---
Insert the SIM and memory card
- Open the SIM card tray: push the tray opener pin in the tray hole and slide the tray out.
- Put the nano-SIM in the SIM slot on the tray with the contact area face down.
- If you have a memory card, put it in the memory card slot.
- Slide the tray back in.
Use only original nano-SIM cards. Use of incompatible SIM cards may damage the card or the device, and may corrupt data stored on the card.
Use only compatible memory cards approved for use with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card.
Important: Do not remove the memory card when an app is using it. Doing so may damage the memory card and the device and corrupt data stored on the card.
Charge the battery and switch the phone on
Plug a compatible charger into a wall outlet, and connect the cable to your
phone. Your phone supports the USB-C cable. You can also charge your phone
from a computer with a USB cable, but it may take a longer time.
If the battery is completely discharged, it may take several minutes before
the charging indicator is displayed.
To switch your phone on, press and hold the power key until the phone
vibrates. The phone guides you through the setup.
For a product-specific online user guide, safety instructions, warranty information, and troubleshooting help, or finding the nearest authorized service facility, go to www.nokia.com/mobile-support.
Product and safety info
You can only use your device on the GSM 850, 900, 1800, 1900; WCDMA 2, 4, 5;
LTE 2, 4, 5, 12, 25, 26, 41, 66, 71 networks.
You need a subscription with a service provider.
Important: 4G/LTE might not be supported by your network service provider
or by the service provider you are using when traveling. In these cases, you
may not be able to make or receive calls, send or receive messages or use
mobile data connections. To make sure your device works seamlessly when full
4G/LTE service is not available, it is recommended that you change the
highest connection speed from 4G to 3G. To do this, on the home screen, tap
Settings > Network & internet > SIMs, and switch Preferred network type to 3G.
For more info, contact your network service provider.
Your device has an internal, non-removable, rechargeable lithiumpolymer
battery. Do not attempt to remove the battery or back cover, as you may
damage the device. To replace the battery, take the device to the nearest
authorised service facility.
Charge your device with the AD-010 charger. HMD Global may make additional
battery or charger models available for this device.
Charging time can vary depending on device capability. Some of the accessories
mentioned in this user guide, such as charger, headset, or data cable, may be
sold separately.
The surface of the device is nickel-free.
Parts ofthe device are magnetic. Metallic materials may be attracted to the
device. Do not place credit cards or other magnetic stripe cards near the
device for extended periods of time, since the cards may be damaged.
Note: Pre-installed system software and apps use a significant part of
memory space.
Keep a safe distance when using the flash. Do not use the flash on people or
animals at close range. Do not cover the flash while taking a photo.
APPROVED FIRMWARE VERSIONS
This device will only operate with firmware versions that have been approved
for use by your wireless carrier and the device manufacturer.
If unauthorized firmware is placed on the device it will not function.
INFORMATION ABOUT SAFEGUARDING DEVICES
We encourage customers to take appropriate measures to secure their devices
and invite them to take advantage of the features available on this device to
help secure it from theft and/or other unauthorized access and use. This
device has a locking function (e.g.,
user-defined codes or patterns) that can serve as a first line of defense
against unauthorized use or access to stored information. If a security
feature that allows customers to track or locate misplaced devices is
available, it is recommended to enable it. Lost or stolen devices should be
immediately reported to your wireless carrier so that proper measures can be
taken to protect accounts. For additional information, visit your wireless
carrier’s Privacy Policy.
Emergency calls
Important: Connections in all conditions cannot be guaranteed.
Never rely solely on any wireless phone for essential communications like
medical emergencies.
Before making the call:
- Switch the phone on.
- If the phone screen and keys are locked, unlock them.
- Move to a place with adequate signal strength.
- On the home screen, tap .
- Type in the official emergency number for your present location. Emergency call numbers vary by location.
- Tap .
- Give the necessary info as accurately as possible. Do not end the call until given permission to do so.
You may also need to do the following:
- If your phone asks for a PIN code, tap Emergency call.
- Switch the call restrictions off in your phone, such as call barring, fixed dialing, or closed user group.
- If the mobile network is not available, you may also try making an internet call, if you can access the internet.
Battery and charger safety
Once charging of your device is complete, unplug the charger from the device
and electrical outlet. Please note that continuous charging should not exceed
12 hours. If left unused, a fully charged battery will lose its charge over
time.
Always keep the battery between 15°C and 25°C (59°F and 77°F) for optimal
performance. Extreme temperatures reduce the capacity and lifetime of the
battery. A device with a hot or cold battery may not work temporarily.
Obey local regulations. Recycle when possible. Do not dispose as household
waste.
Do not expose the battery to extremely low air pressure or leave it to
extremely high temperature, for example dispose it in a fire, as that may
cause the battery to explode or leak flammable liquid or gas.
Do not dismantle, cut, crush, bend, puncture, or otherwise damage the battery
in any way. If a battery leaks, do not let liquid touch skin or eyes. If this
happens, immediately flush the affected areas with water, or seek medical
help. Do not modify, attempt to insert foreign objects into the battery, or
immerse or expose it to water or other liquids. Batteries may explode if
damaged.
Use the battery and charger for their intended purposes only.
Improper use, or use of unapproved or incompatible batteries or chargers may
present a risk of fire, explosion, or other hazard, and may invalidate any
approval or warranty. If you believe the battery or charger is damaged, take
it to a service center or your phone dealer before continuing to use it.
Never use a damaged battery or charger.
Only use the charger indoors. Do not charge your device during a lightning
storm.
To unplug a charger or an accessory, hold and pull the plug, not the cord.
Additionally, the following applies if your device has a removable battery:
- Always switch the device off and unplug the charger before removing the battery.
- Accidental short-circuiting can happen when a metallic object touches the metal strips on the battery. This may damage the battery or the other object.
Take care of your device
Handle your device, battery, charger and accessories with care. The following
suggestions help you keep your device operational.
- Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits. If your device gets wet, remove the battery if possible, and let the device dry.
- Do not use or store the device in dusty or dirty areas.
- Do not store the device in high temperatures. High temperatures may damage the device or battery.
- Do not store the device in cold temperatures. When the device warms to its normal temperature, moisture can form inside the device and damage it.
- Do not open the device other than as instructed in the user guide.
- Unauthorized modifications may damage the device and violate regulations governing radio devices.
- Do not drop, knock, or shake the device or the battery. Rough handling can break it.
- Only use a soft, clean, dry cloth to clean the surface of the device.
- Do not paint the device. Paint can prevent proper operation.
- Keep the device away from magnets or magnetic fields.
- To keep your important data safe, store it in at least two separate places, such as your device, memory card, or computer, or write down important info.
During extended operation, the device may feel warm. In most cases, this is normal. To avoid getting too warm, the device may automatically slow down, close apps, switch off charging, and if necessary, switch itself off. If the device is not working properly, take it to the nearest authorized service facility.
Protect your hearing
To prevent possible hearing damage, do not listen at high volume levels for
long periods. Exercise caution when holding your device near your ear while
the loudspeaker is in use.
Safety and texting while driving
Safety should be every driver’s first priority. Drivers must obey all local
laws that may include restrictions on the use of mobile phonesor accessories
while driving. If use is legal, always keep your hands free to operate the
vehicle while driving and use a hands- free devicewhenever possible. Suspend
calls in heavy traffic or hazardous weather. Get to know your mobile phone and
its features and makeany necessary information inputs prior to driving. Do not
input dataor engage in text messaging while driving. Mobile phones should
nobe used when use may be a distraction to the driver.
Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves as set forth
by the Federal Communications Commission (FCC). Refer tothe following.
FCC RF Exposure Information
Your handset is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio frequency
(RF) energy set by the Federal Communications Commission of the U.S.
Government. The guidelines are based on standards that were developed by
independent scientific organization through periodic and thorough evaluation
of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless handsets employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6 W/kg. The tests are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC for each model. The highest SAR
value for this handset model as reported to the FCC when tested for use at
the ear is 1.37 W/kg, and when worn on the body in a holder or carry case, is
1.42 W/kg.
Body-worn Operation; This device was tested for typical body-worn operations
with the handset kept 1.0 cm from the body. To maintain compliance with FCC RF
exposure requirements, use accessories that maintain a 1.0 cm separation
distance between the user’s body and the handset. The use of belt clips,
holsters and similar accessories should not contain metallic components in its
assembly. The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements, and should be avoided. The FCC
has granted an Equipment Authorization for this handset model with all
reported SAR levels evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this handset model is on file with the FCC and
can be found under the FCC ID Search section of
www.fcc.gov/oet/ea/ after searching on FCC ID
2AJOTTA-1584.
Additional information on Specific Absorption Rates (SAR) can be found on the
FCC website at www.fcc.gov/general/radio-
frequencysafety-0.
To send data or messages, a good connection to the network is needed. Sending
may be delayed until such a connection is available.
Follow the separation distance instructions until the sending is finished.
During general use, the SAR values are usually well below the values stated
above. This is because, for purposes of system efficiency and to minimise
interference on the network, the operating power of your mobile is
automatically decreased when full power is not needed for the call. The lower
the power output, the lower the SAR value.
Device models may have different versions and more than one value. Component
and design changes may occur over time and some changes could affect SAR
values.
For more info, go to www.sar-tick.com. Note that
mobile devices may be transmitting even if you are not making a voice call.
Your mobile device is also designed to meet the United States Federal
Communications Commission (FCC) guidelines. FCC ratings for your device and
more information on SAR can be found at
http://transition.fcc.gov/oet/rfsafety/sar.html.
The World Health Organization (WHO) has stated that current scientific
information does not indicate the need for any special precautions when using
mobile devices. If you are interested in reducing your exposure, they
recommend you limit your usage or use a hands-free kit to keep the device away
from your head and body.
For more information and explanations and discussions on RF
exposure, go to the WHO website at https://www.who.int/healthtopics /electromagnetic-fields#tab=tab_1.
Copyrights and other notices
FCC notice:
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. For more info, go
to www.fcc.gov/engineering-technology/electromagnetic-compatibility-division
/radio-frequency-safety/faq/rf-safety. Any changes or modifications not expressly approved by HMD Global
could void the user’s authority to operate this equipment. Note: This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
HAC notice:
Your phone is compliant with the FCC Hearing Aid Compatibility requirements.
The FCC has adopted HAC rules for digital wireless phones. These rules require
certain phones to be tested and rated under the American National Standard
Institute (ANSI) C63.19-2011 hearing aid compatibility standards. The ANSI
standard for hearing aid
compatibility contains two types of ratings:
- M-Ratings: Rating for less radio frequency interference to enable acoustic coupling with hearing aids.
- T-Ratings: Rating for inductive coupling with hearing aids in telecoil mode.
Not all phones have been rated. A phone is considered hearing aid compatible
under FCC rules if it is rated M3 or M4 for acoustic coupling and T3 or T4 for
inductive coupling. These ratings are given on a scale from one to four, where
four is the most ompatible. Your phone meets the M3/T4 level rating.
However, hearing aid compatibility ratings don’t guarantee that interference
to your hearing aids won’t happen. Results will vary, depending on the level
of immunity of your hearing device and the degree of your hearing loss. If
your hearing device happens to be vulnerable to interference, you may not be
able to use a rated phone successfully. Trying out the phone with your hearing
device is the best way to evaluate it for your personal needs.
This phone has been tested and rated for use with hearing aids for some of the
wireless technologies that it uses. However, there may be some newer wireless
technologies used in this phone that have not been tested yet for use with
hearing aids. It is important to try the different features of this phone
thoroughly and in different locations, using your hearing aid or cochlear
implant, to determine if you hear any interfering noise. Consult your service
provider or the manufacturer of this phone for information on hearing aid
compatibility. If you have questions about return or exchange policies,
consult your service provider or phone retailer.
Hearing devices may also be rated. Your hearing device manufacturer or hearing
health professional may help you find this rating. For more information about
FCC Hearing Aid Compatibility, please go to http://www.fcc.gov/cgb/dro.
This device has an electronic label for certification information. To access
it, select Settings > System > Certification.
HMD Global Oy provides a Manufacturer’s Limited Warranty (“Warranty”) for each
genuine device (the “Product”) and related Accessories (as defined in Section
2 of the Warranty) designated for sale in the United States of America and
Canada. The complete Warranty document is available at the following link and
can be accessed by entering your device model number and selecting the
applicable country and language:
https://www.nokia.com/phones/en_us/support/topics/warranty-finder
© 2023 HMD Global. HMD Global Oy is the exclusive licensee of the Nokia brand
for phones & tablets. Nokia is a registered trademark of Nokia Corporation.
OZO is a trademark of Nokia Technologies Oy.
Snapdragon is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Snapdragon is a trademark or registered trademark of Qualcomm Incorporated. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>